ICOP VDX-6372RD, VDX-6372RD-Plus User Manual
VDX-6372RD/VDX-6372RD-Plus
DM&P Vortex86DX 600MHz
PC/104 CPU Module
with 2S/2USB/VGA/LCD/GPIO/PWMx16
128MB DDR2 Onboard
User’s Manual
(Revision 1.1A)
Copyright
The information in this manual is subject to change without notice for continuous improvement in
the product. All rights are reserved. The manufacturer assumes no responsibility for any
inaccuracies that may be contained in this document and makes no commitment to update or to
keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part,
in any form or by any means without the prior written permission of the ICOP Technology Inc..
Copyright 2008 ICOP Technology Inc.
Manual No. IUM6372D000-01 Ver.1.0A May, 2010
Manual No. IUM6372D000-01 Ver.1.1A October, 2014
Trademarks Acknowledgment
Vortex86DX is the registered trademark of ICOP Technology Inc.
Other brand names or product names appearing in this document are the properties
and registered trademarks of their respective owners. All names mentioned herewith
are served for identification purpose only.
T a b l e o f C o n t e n t s
T a b l e o f C o n t e n t s ............................................................. iii
C h a p t e r 1 Introduction……………………………………………1
1.1 Packing List ............................................................ 1
1.2 Product Description ................................................ 1
1.3 Specifications ......................................................... 3
1.4 Board Dimension .................................................... 5
C h a p t e r 2 Installation……………………………………………..6
2.1 Board Outline ......................................................... 6
2.2 Connectors & Jumpers Location .................... ........7
2.3 Connectors & Jumpers Summary ........................... 9
2.4 Pin Assignments & Jumper Settings ..................... 10
2.5 System Mapping ................................................... 19
2.6 Watchdog Timer ................................................... 23
2.7 GPIO .................................................................... 24
2.8 SPI flash ............................................................... 25
2.9 PWM .................................................................... 26
3.0 IDE to SD ............................................................. 27
C h a p t e r 3 Driver Installation……………………………………28
Appendix ………………………………………………………………..29
A. TFT Flat Panel Data Output ...................................... 29
B. TFT Flat Panel Support List ....................................... 30
C. LVDS Flat Panel Support List .................................... 32
D. Flat Panel Hardware Setting ..................................... 33
E. Flat Panel Wiring and Lighting .................................. 34
F. TCP/IP library for DOS real mode .............................. 35
G. BIOS Default Setting ................................................. 36
Warranty ............................................................................................ 37
This page is blank
VDX-6372RD Vortex86DX PC/104 CPU Module
1
C h a p t e r 1
Introduction
1.1 Packing List
Product Name Package
VDX-6372RD
&
VDX-6372RD-Plus
Embedded Vortex86DX CPU All -in-One Board
Manual & Drivers CD x 1
RS232 cable x 2
PRINT cable x1
IDE cable x 1
USB cable x 1
(U S B po rt x 2
)
VGA cable x 1
GPIO cable x 1
PS/2 Mouse cable x 1
PS/2 Keyboard cable x 1
Screw Kit x 1
VDX-6372RD Vortex86DX PC/104 CPU Module
2
1.2 Product Description
The VDX-6372RD family of low-power x86 embedded controller is designed to meet PC/104
specification, and integrated with the following features.
600 MHz Vortex86DX SoC
VGA, TFT/ LVDS LCD support up to
1280x1024 resolution
128MB DDR2 system memory
Enhanced IDE (UltraDMA-100/66/33)
2 USB 2.0 (host)
Up to 2 serial ports
Parallel port
16-bit GPIOs
PC/104-Plus expansion bus
Meet PC/104 stacking spec.
2 watchdog timer
PWM 16~24 channels
JTAG interface
AMI BIOS
Single voltage +5V DC
Support extended operating
temperature range of -20°C to +70°C
The VDX-6372D PC/104 family of embedded controller is designed with backward compatibility
in mind, to provide migration path for projects facing end-of-life challenges with their existing x86
based PC/104 controller. The VDX-6372D family of controller is designed as a plug in
replacement, with backward compatibility to support legacy software to help extend existing
product life cycle without heavy re-engineering.
VDX-6372D is suitable for broad range of data-acquisition, Industrial automation, Process
control, Automotive controller, AVL, Intelligent Vehicle management devic,Medical device,
Human machine interface, Robotics, machinery control And more…application that required
small footprint, low-power and low-cost hardware with open industry standard such as PC/104.
VDX-6372RD Vortex86DX PC/104 CPU Module
3
1.3 Specifications
Features VDX-6372RD
CPU
D
M&P SoC CPU Vortex86
DX- 6
00MHz
Real T ime Clock w ith Lithium Battery Backup
Cache
L1:1 6K I
-
Cach e , 16K D
-
Cache
, L2 Cache
128 K B
BIOS
AMI BIOS
Bus Interface
PC/1 04 Standard Complia nt (Optional: PC
I-104)
System Memory
128MB DDR2
O
nboard
Watchdog Timer
S
oftwa re programmable from 30.5
us
to 51 2 seconds x2
se ts(Watchdog 1 fully compatible with M6117 D)
VGA
XGI Volari Z9s Chipset
VGA and TFT Flat Panel Interface Support
LVDS Flat Panel Inte rface Support (Optional)
Onbo a rd 32MB VGA Memo ry
Supp o rt resolution up to 1 2 80 x 1024,16MB colors
I /O Interface
Enha n ced IDE port (U ltraDMA-100/66/33) x1
RS-2 32 port x1
RS-2 32/422/485 port x1 (RS485: Auto Dire ction)
Para l lel port x1
USB port x2 (USB 2 .0 version)
16-b it GPIO port x1
Connectors
2.00 mm ∅ 44-pin box heade r for IDE x1
2.00 mm ∅ 44-pin box heade r for LCD x 1
2.00 mm ∅ 10-pin box heade r for VGA x1
2.00 mm ∅ 10-pin box heade r for USB x1
2.00 mm ∅ 26-pin box heade r for Print x1
2.00 mm ∅ 20-pin box heade r for 16-bit GPIO x1
2.00 mm ∅ 10-pin box heade r for RS-232 x2
2.54 mm ∅ 5-pin box header fo r Keyboard x1
2.54 mm ∅ 5-pin header for Mo use x1
2.54 mm ∅ 4-pin header for DC -in x1
2.54 mm ∅ 3-pin header for RS -485 x1
2.54 mm ∅ 2-pin header for Re set x1
2.54 mm ∅ 7-pin header for Re dundancy x1(O p t)
2.54 mm ∅ 2-pin header for SY S-Fail-SW- x1 (Opt)
1.25 mm ∅ 6-pin Wafer fo r JTAG x1
Flash Disk Support
44 -p in IDE Flash Disk( Embe d D isk 16MB or a b ove )
44 -p in IDE to Micro SD (Op tional)
VDX-6372RD Vortex86DX PC/104 CPU Module
4
PWM
16~24 chann
els
Power Requirement
Sin g le Vo ltage +5V
@ 600mA
Dimension
90 X 9 6mm (3.54 x 3.7 7 inches)
Weight
80g
Operating
Temperature
-
20oC ~ +70
o
C
-4 0 ° C ~ +85°C (Optional)
VDX-6372RD Vortex86DX PC/104 CPU Module
5
1.4 Board Dimension
VDX-6372RD Vortex86DX PC/104 CPU Module
6
C h a p t e r 2
Installation
2.1 Board Outline
(Note1: COM2 RS232/422/485 is selected by BIOS setting)
(Note2: PCI-104 connector is optional)
(Note3: VI/O Default setting of PCI-104 connector is +5V)
(Note4: Redundancy Signal and System-Fail-SW are optional)
VDX-6372RD Vortex86DX PC/104 CPU Module
7
2.2 Connectors & Jumpers Location
Connectors
VDX-6372RD Vortex86DX PC/104 CPU Module
8
Jumpers & LEDs
Loading...