ICOP VDX-6354RD, VDX-6354RD-PLUS User Manual

VDX-6354RD / VDX-6354RD-PLUS

DM&P Vortex86DX 800MHz

PC/104 CPU Module

with 4S/2USB/VGA/LCD/AUDIO/ LAN/GPIO/PWMx16

256MB DDR2 Onboard

User’s Manual

(Revision 1.2A)

Copyright

The information in this manual is subject to change without notice for continuous improvement in the product. All rights are reserved. The manufacturer assumes no responsibility for any inaccuracies that may be contained in this document and makes no commitment to update or to keep current information contained in this manual.

No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part, in any form or by any means without the prior written permission of the ICOP Technology Inc.

Trademarks Acknowledgment

Vortex86DX is the registered trademark of ICOP Technology Inc.

Other brand names or product names appearing in this document are the properties and registered trademarks of their respective owners. All names mentioned herewith are served for identification purpose only.

T a b l e o f C o n t e n t s

T a b l e o f C o n t e n t s ............................................................. iii

C h a p t e r 1 Introduction……………………………………………1

1.1 Packing List ............................................................ 1

1.2 Product Description ................................................ 2

1.3 Specifications ......................................................... 3

1.4 Board Dimension .................................................... 5

C h a p t e r 2 Installation……………………………………………..6

2.1 Board Outline ......................................................... 6

2.2 Connectors & Jumpers Location .................... ........7

2.3 Connectors & Jumpers Summary ........................... 9

2.4 Pin Assignments & Jumper Settings ......................11

2.5 System Mapping ................................................... 22

2.6 Watchdog Timer ................................................... 25

2.7 GPIO .................................................................... 26

2.8 SPI flash ............................................................... 27

2.9 PWM .................................................................... 28

3.0 IDE to SD ............................................................. 29

C h a p t e r 3 Driver Installation……………………………………30

Appendix ………………………………………………………………..31

A. TFT Flat Panel Data Output ...................................... 31

B. TFT Flat Panel Support List ....................................... 32

C. LVDS Flat Panel Support List .................................... 34

D. Flat Panel Wiring and Lighting .................................. 35

E. TCP/IP library for DOS real mode ............................. 36

F. BIOS Default Setting .................................................. 37

Warranty ............................................................................................ 38

This page is blank

VDX-6354RD Vortex86DX PC/104 CPU Module

1

C h a p t e r 1

Introduction

1.1 Packing List

Product Name Package

VDX-6354RD

&

VDX-6354RD-PLUS

Embedded Vortex86DX CPU All -in-One Board

Manual & Drivers CD x 1

RS232 cable x 4

PRINTER cable x1

IDE cable x 1

USB cable x 1

(U S B po rt x 2

)

VGA cable x 1

LAN cable x 1

GPIO cable x 1

AUDIO Line x2

PS/2 Mouse cable x 1

PS/2 Keyboard cable x 1

Screw Kit x 1

VDX-6354RD Vortex86DX PC/104 CPU Module

2

1.2 Product Description

The VDX-6354RD family of low-power x86 embedded controller is designed to meet PC/104

specification, and integrated with the following features.

 800 MHz Vortex86DX SoC  VGA, TFT/ LVDS LCD support up to

1280x1024 resolution

 256 / 512MB DDR2 system memory  Enhanced IDE (UltraDMA-100/66/33)  10/100Mbps Ethernet  2 USB 2.0 (host)  Up to 4 serial ports  Parallel port  16-bit GPIOs

 Audio  Onboard 4MB SPI Flash  PC/104-Plus expansion bus  Meet PC/104 stacking spec.  2 watchdog timer  PWM 16~24 channels  JTAG interface  AMI BIOS  Single voltage +5V DC  Support extended operating

temperature range of -20°C to +70°C

The VDX-6354RD PC/104 family of embedded controller is designed with backward compatibility

in mind, to provide migration path for projects facing end-of-life challenges with their existing x86

based PC/104 controller. The VDX-6354RD family of controller is designed as a plug in

replacement, with backward compatibility to support legacy software to help extend existing

product life cycle without heavy re-engineering.

VDX-6354RD is suitable for broad range of data-acquisition, Industrial automation, Process

control, Automotive controller, AVL, Intelligent Vehicle management devic,Medical device,

Human machine interface, Robotics, machinery control And more…application that required

small footprint, low-power and low-cost hardware with open industry standard such as PC/104.

VDX-6354RD Vortex86DX PC/104 CPU Module

3

1.3 Specifications

Features VDX-6354RD

CPU

DM&P SoC CPU Vortex86

DX- 8

00MHz

Real T ime Clock w ith Lithium Battery Backup

Cache

L1:1 6K I

-

Cach e , 16K D

-

Cache

L2:

128 KB

Cach e

BIOS

AMI BIOS

Bus Interface

PC/1 04 Standard Complia nt (Opti

ona l: PC

I-104)

System Memory

256 / 512

MB DDR2

O

nboa rd

Watchdog Timer

Softwa re programmable from 30.5

us

to 51 2 seconds x2

se ts(Watchdog 1 fully compatible with M6117 D)

VGA

XGI Volari Z9s Chipset

VGA and TFT Flat Panel Interface Support LVDS Flat Panel Inte rface Support (Optional) Onbo a rd 32MB VGA Memo ry Supp o rt resolution up to 1 2 80 x 1024,16MB colors

LAN

In teg rated 10/100M Ethernet

AUDIO

CM11 9 USB

A

udio controller

I /O Interface

Enha n ced IDE port (U ltraDMA-100/66/33) x1 RS-2 32 port x3 RS-2 32/422/485 port x1 (RS485: Auto Dire ction) Para l lel port x1 USB port x2 (USB 2 .0 version) 16-b it GPIO port x1 10/1 00Mbps Ethernet port x1

Connectors

2.00 mm ∅ 44-pin box heade r for IDE x1

2.00 mm ∅ 44-pin box heade r for LCD x 1

2.00 mm ∅ 10-pin box heade r for VGA x1

2.00 mm ∅ 10-pin box heade r for USB x1

2.00 mm ∅ 26-pin box heade r for Printer x1

2.00 mm ∅ 20-pin box heade r for 16-bit GPIO x1

2.00 mm ∅ 10-pin box heade r for RS-232 x4

2.00 mm ∅ 8-pin header for Ethernet x 1

2.54 mm ∅ 5-pin box header fo r Keyboard x1

2.54 mm ∅ 5-pin header for Mo use x1

2.54 mm ∅ 4-pin header for DC -in x1

2.54 mm ∅ 3-pin header for RS -485 x1

2.54 mm ∅ 2-pin header for Re set x1

2.54 mm ∅ 7-pin header for Re dundancy x1(O p t)

2.54 mm ∅ 2-pin header for SY S-Fail-SW- x1 (Opt)

1.25 mm ∅ 6-pin Wafer fo r JTAG x1

1.25 mm ∅ 4-pin Wafer fo r Line-out/MIC-in x2

VDX-6354RD Vortex86DX PC/104 CPU Module

4

Flash Disk Support

On b o ard 4 M B SPI Flash Disk (Driver: A) 44 -p in IDE Flash Disk( Embe d D isk 16MB or a b ove ) 44 -p in IDE to Micro SD (Op tional)

PWM

16~24 channels

Power Requirement

Sin g le Vo ltage +5V

@740mA

Dimension

90 X 9 6mm (3.54 x 3.7 7 inches)

Weight

90g

Operating Temperature

-

20oC ~ +70

o

C

-4 0 ° C ~ +85°C (Optional)

VDX-6354RD Vortex86DX PC/104 CPU Module

5

1.4 Board Dimension

VDX-6354RD Vortex86DX PC/104 CPU Module

6

C h a p t e r 2

Installation

2.1 Board Outline

Note:

1. COM2 RS232/422/485 is selected in BIOS setting

2. PCI-104 connector is optional

3. VI/O default voltage of PCI-104 connector is +5V

4. VDX-6354RD-512 is optional

5. Redundancy Signal and System-Fail-SW are optional

VDX-6354RD Vortex86DX PC/104 CPU Module

7

2.2 Connectors & Jumpers Location

Connectors

VDX-6354RD Vortex86DX PC/104 CPU Module

8

Jumpers & LEDs

VDX-6354RD Vortex86DX PC/104 CPU Module

9

2.3 Connectors & Jumpers Summary

Summary Table

Nbr

Description Type of Connections Pin nbrs.

J1 IDE Box Header, 2.0∅ ,22x2

44-pin

J2 USB Box Header,2.0∅ , 5x2 10-pin J4 LAN Pin Header, 2.0∅ , 4x2 8-pin J5 JTAG Wafer, 1.25∅ , 6x1 6-pin J6 Reset Pin Header, 2,54∅,1x2 2-pin J7 Redundancy (Optional) Pin Header, 2.54∅, 7x1 7-pin

J8 System –Fail-Switch (Optional)

Pin Header, 2.54∅ , 2x1

2-pin

J9 PS/2 Keyboard Box Header, 2,54∅,1x5 5-pin

J10

PS/2 Mouse Pin Header, 2,54∅,1x5 5-pin

J11

COM1(RS232 or TTL/GPIO) Box Header, 2.0∅ 5x2 10-pin

J12

COM2(RS232/422/485 or TTL)

Box Header, 2.0∅ 5x2 10-pin

J13

GPIO (Port 0/1 or PWMx16) Box Header, 2.0∅ ,10x2

20-pin

J15

RS-485 (Auto direction) Molex Header,2.54∅, 3x1

3-pin

J16

Power Connector Terminal Block 5.0∅,2x1

2-pin

J17

COM3(RS232 or TTL) Box Header, 2.0∅ 5x2 10-pin

J18

PRINT Box Header, 2.0∅ , 13x2

26-pin

J19

COM4(RS232 or TTL) Box Header, 2.0∅ 5x2 10-pin

J20

PC104 Connector – 64 pin Box Header, 2.54∅ 32x2

64-pin

J21

PC104 Connector – 40 pin Box Header, 2.54∅ 20x2

40-pin

J22 4P Power Source (Interconnect

to PC/104 – J20)

Pin Header, 2.54∅ , 4x1

4-pin

J23

PC/104 + (Optional) Box Header, 2.0∅ , 30x4

120-pin

J24

VGA Pin Header, 2.0∅ ,5x2 10-pin

J25

LCD Connector Box Header,2.0∅ ,22x2 44-pin

J33

LINE-OUT Wafer, 1.25∅ , 4x1 4-pin

J34

MIC-IN Wafer, 1.25∅ , 4x1 4-pin

PWR-

LED

Power Active LED (Red) LED-SMD

IDELED

IDE Active LED (Green ) LED-SMD

MTBF-

LED

MTBF-Out (Orange) LED-SMD

ICOP VDX-6354RD, VDX-6354RD-PLUS User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual