ICOP VDX-6329, VDX-6329-512 User Manual
VDX-6329/ VDX-6329-512
DM&P Vortex86DX 800MHz
3.5” CPU Module
with 6S/2USB/VGA/LCD/AUD IO/2LAN/CF/FDD
256MB DDR2 Onboard
User’s Manual
(Revision 1.1A)
Copyright
The information in this manua l is subject to cha nge without notice for continuous improvement in
the product. All rights are reserved. The manufacturer assumes no responsibility for any
inaccuracies that may be contained in this document. And makes no commitment to update or to
keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part ,
in any form or by any means without the prior written permission of the ICOP Technology Inc..
Copyright 2008 ICOP Technology Inc.
Manual No. IUM6329000-01 Ver.1.0A
April, 2010
Manual No. IUM6329000-01 Ver.1.1A
August, 2010
Trademarks Acknowledgment
Vortex86DX is the registered trademark of ICOP Technology Inc.
Other brand names or product names appearing in this document are the properties
and registered trademarks of their respective owners. All names mentioned herewith
are served for identification purpose only.
T a b l e o f C o n t e n t s
T a b l e o f C o n t e n t s.............................................................iii
C h a p t e r 1 Introduction……………………………………………1
1.1 Packing List............................................................1
1.2 Product Description................................................2
1.3 Specifications.........................................................3
1.4 Board Dimension....................................................5
C h a p t e r 2 Installation……………………………………………..6
2.1 Board Outline.........................................................6
2.2 Connectors & Jumpers Location............................7
2.3 Connectors & Jumpers Summary...........................9
2.4 Pin Assignments & Jumper Settings......................11
2.5 System Mapping...................................................24
2.6 Watchdog Timer...................................................27
2.7 GPIO....................................................................28
2.8 SPI flash...............................................................29
2.9 IDE to SD.............................................................30
C h a p t e r 3 Driver Installation……………………………………31
Appendix ………………………………………………………………..32
A. TFT Flat Panel Data Output ......................................32
B. TFT Flat Panel Support List.......................................33
C. LVDS Flat Panel Support List....................................35
D. Flat Panel Hardware Setting.....................................36
E. Flat Panel Wiring and Lighting..................................37
F. TCP/IP library for DOS real mode..............................38
G. BIOS Default Setting.................................................39
Warranty............................................................................................40
Vortex86DX-6329 Vortex86DX 3.5” CPU Module
1
C h a p t e r 1
Introduction
1.1 Packing List
Product Name Package
VDX-6329
&
VDX-6329-512
Embedded Vortex86DX CPU All-in-One Board
Manual & Drivers CD x 1
RS232 cable x 6
PRINT cable x1
IDE cable x 1
VGA cable x 1
Audio cable x 2
FDD cable x 1
USB cable x 1 (US B port x 2)
LAN cable x 2
PS/2 Mouse cable x 1
PS/2 Keyboard cable x1
Vortex86DX-6329 Vortex86DX 3.5” CPU Module
2
1.2 Product Description
The VDX-6329 family of low-power x86 embedded controller is designed to meet 3.5”
specification, and integrated with the following features.
800MHz Vortex86DX Syst em-On-Chip
VGA, TFT/LVDS LCD support up to
1280x1024 resolution
256/ 512MB DDR2 system memory
Enhanced IDE (UltraDMA-100/66/33)
10/100Mbps Ethernet x2
2 USB 2.0 (Host)
Up to 6 serial ports
Parallel port
Onboard 4MB SPI Flash
x-PCI expansion bus
Meet PC/104 stacking spec.
2 watchdog timer
JTAG interface
AMI BIOS
Single voltage +5V DC
Support extended operating
temperature range of -20°C to +70°C
The VDX-6329 3.5” family of embedded controller is designed with backward compatibility in
mind, to provide migration path for projects facing end-of-life challenges with their existing x86
based 3.5” controller. The VDX-6329 family of controller is designed as a plug in replacement,
with backward compatibility to support legacy software to help extend existing product life cycle
without heavy re-engineering.
VDX-6329 is suitable for broad range of data-acquisition, Industrial automation, Process
control, Automotive controller , AVL, Intelligent Vehicle management devic,Medical device,
Human machine interface, Robotics, machinery control And more…application that required
small footprint, low-power and low-cost hardware with open industry standard such as 3.5 ”.
Vortex86DX-6329 Vortex86DX 3.5” CPU Module
3
1.3 Specifications
Features VDX-6329
CPU
DM&P SoC CPU Vortex86DX- 800MHz
Real Time Clock with Lithium Battery Backup
Cache
L1:16K I-Cache, 16K D-Cache, L2 Cache 128 KB
BIOS
AMI BIOS
Bus Interface
PC/104 Standard Compliant
32-bit x-PCI interfa ce, compatible with PCI Rev.2.1
System Memory
256/ 512MB DDR2 Onboard
Watchdog Timer
Software programmable fr om 30.5 us to 512 seconds x2
sets(Watchdog 1 fully compatible with M6117D)
VGA
XGI Volari Z9s Chipset
VGA and TFT Flat Panel Interface Support
LVDS Flat Panel Interface Support
Onboard 32MB VGA Memory
Support resolution up to 1280 x 1024,16MB color s
LAN
Realtek 8100B 10/100Mbps Ethernet Controller
Half/Full duplex capability
Audio
CM119 USB Audio controller
I /O Interface
Enhanced IDE port (UltraDMA -100/66/33) x1
FDD port x1
RS-232 port x5
RS-232/422/485 port x1 (RS-485: Auto Direction)
Parallel port x1
USB port x2 (USB 2.0 version)
10/100Mbps Ethernet port x2
Connectors
2.54mm 5-pin box header for Keyboard x1
2.54mm 5-pin header for Mouse x 1
2.54mm 3-pin header for RS-485 x1
2.54mm 2-pin header for Reset x1
2.54mm 4-pin header for DC-in x1
2.00mm 44-pin box header for IDE x1
2.00mm 44-pin box header for LCD x 1
2.00mm 34-pin box header for FDD x1
2.00mm 26-pin box header for Printer x1
2.00mm 10-pin box header for RS-232 x6
2.00mm 10-pin box header for USB x1
2.00mm 10-pin box header for VGA
2.00mm 8-pin header for LAN x 2
2.00mm 4-pin wafer for Line-out/MIC-in x 2
1.25mm 6-pin wafer for JTAG x1
Type I/II Compact Flash slot x1
Vortex86DX-6329 Vortex86DX 3.5” CPU Module
4
Flash Disk Support
Onboard 4MB SPI Flash Disk (Dr iver: A)
44-pin IDE Flash Disk( EmbedDisk 16MB or above)
Type I/II CF Card
44-pin IDE to Micro SD (Optional)
SRAM support
512KB (Optional)
Power Requirement
Single Voltage +5V @ 800mA
Dimension
102 X 144mm (4.01 x 5.67 inches)
Weight
150g
Operating
Temperature
-20oC ~ +70oC
-40°C ~ +85°C (Optional)
Vortex86DX-6329 Vortex86DX 3.5” CPU Module
5
1.4 Board Dimension
Vortex86DX-6329 Vortex86DX 3.5” CPU Module
6
C h a p t e r 2
Installation
2.1 Board Outline
(Note1: COM2 RS232/422/485 is selected by BIOS setting)
(Note2: J39 Default setting of JTAG Has to be Disable: Pin 1 & Pin 2 short)
(Note3: VDX-6329-512 is optional)
Vortex86DX-6329 Vortex86DX 3.5” CPU Module
7
2.2 Connectors & Jumpers Location
Connectors
Vortex86DX-6329 Vortex86DX 3.5” CPU Module
8
Jumpers & LEDs
Vortex86DX-6329 Vortex86DX 3.5” CPU Module
9
2.3 Connectors & Jumpers Summary
Summary Table
Nbr Description Type of Connections Pin nbrs.
J1 IDE Box Header, 2.0 ,22x2 44-pin
J2 CF Card Master/Slave Select Pin Header, 2.54, 2x1 2-pin
J4 USB Box Header,2.0 , 5x 2 10-pin
J7 JTAG Wafer, 1.25 , 6x1 6-pin
J8 Reset Pin Header, 2,54,1x2 2-pin
J9 PS2 Keyboard Box Header,2,54, 1x5 5-pin
J12
COM2(RS-232/422/485)
Box Header, 2.54 5x2 10-pin
J15 RS-485 Molex Header,2.54, 3x1 3-pin
J16 Power Connector Terminal Block 5.0,2x1 2-pin
J17 COM3 Box Header, 2.0 5x2 10-pin
J18 PRINT Box Header, 2.0 , 13x2 26-pin
J19 COM4 Box Header, 2.0 5x2 10-pin
J20 FDD Box H eader, 2.0 ,17x2 24-pin
J21 COM5 Box Header, 2.0 5x2 10-pin
J23 COM6 Box Header, 2.0 5x2 10-pin
J25 PC104 Connector – 64 pin Box Header, 2.54 32x2 64-pin
J26 PC104 Connector – 40 pin Box Header, 2.54 20x2 40-pin
J27
4P Power Source (Interconnect
to PC/104 – J25)
Pin Header, 2.54 , 4x1 4-pin
J30
VGA
Box Header, 2.0 5x2 10-pin
J32
J38
Display type Setup Pin Header, 2.54 , 3x1 3-pin
J33 LCD Box Header,2.0 ,22x2 44-pin
J39 JTAG Disable (Default setting)
Pin Header, 2,54,1x2 2-pin
J40 LINE-OUT Wafer , 2.0 , 4x1 4-pin
J41 MIC-IN Wafer , 2.0 , 4x1 4-pin
J42 LAN 1 Pin Header, 2.0 , 5x2 8-pin
J43 LAN 2 Pin Header, 2.0 , 5x2 8-pin
J44 LAN1 Enable/Disable Pin Header, 2.54, 2x1 2-pin
J45 LAN2 Enable/Disable Pin Header, 2.54, 2x1 2-pin
J46 Mouse Pin Header,2,54, 1x5 5-pin
Vortex86DX-6329 Vortex86DX 3.5” CPU Module
10
J47 x-PCI
Box Header, 2.0 , 32x2 64-pin
J48 COM1 Box Header, 2.0 5x2 10-pin
CF1 Compact Flash Type I/II CF Connector 50-pin
PWR_L
ED
POWER Active LED (Red)
IDE_LED IDE Active LED (Green )
MTBF-
LED
MTBF-Out (Orange) LED-SMD
SP1 BUZZER
Loading...