Page 1
VDX-6318RD / VDX-6318RD-512
DM&P Vortex86DX 800MHz
Tiny CPU Module
with 4S/3USB/VGA/LCD/AUDIO/LAN/2GPIO/PWMx24
256MB DDR2 Onboard
User’s Manual
(Revision 1.1A)
Page 2
Copyright
The information in this manual is subject to change without notice for continuous improvement in
the product. All rights are reserved. The manufacturer assumes no responsibility for any
inaccuracies that may be contained in this document and makes no commitment to update or to
keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part,
in any form or by any means without the prior written permission of the ICOP Technology Inc..
Copyright 2009 ICOP Technology Inc.
Manual No. IUM6318D000-01 Ver.1.0A March, 2011
Manual No. IUM6318D000-01 Ver.1.1A October, 2014
Trademarks Acknowledgment
Vortex86DX is the registered trademark of ICOP Technology Inc.
Other brand names or product names appearing in this document are the properties
and registered trademarks of their respective owners. All names mentioned herewith
are served for identification purpose only.
Page 3
T a b l e o f C o n t e n t s
T a b l e o f C o n t e n t s ............................................................. iii
C h a p t e r 1 Introduction……………………………………………1
1.1 Packing List ............................................................ 1
1.2 Product Description ................................................ 2
1.3 Specifications ......................................................... 3
1.4 Board Dimension .................................................... 4
C h a p t e r 2 Installation……………………………………………..5
2.1 Board Outline ......................................................... 5
2.2 Connectors & Jumpers Location .................... ........6
2.3 Connectors & Jumpers Summary ........................... 8
2.4 Pin Assignments & Jumper Settings ....................... 9
2.5 System Mapping ................................................... 16
2.6 Watchdog Timer ................................................... 19
2.7 GPIO .................................................................... 20
2.8 SPI flash ............................................................... 21
2.9 PWM .................................................................... 22
3.0 IDE to SD ............................................................. 23
C h a p t e r 3 Driver Installation……………………………………24
Appendix ………………………………………………………………..25
A. TFT Flat Panel Data Output ...................................... 25
B. TFT Flat Panel Support List ....................................... 26
C. LVDS Flat Panel Support List .................................... 28
D. Flat Panel Wiring and Lighting .................................. 29
E. TCP/IP library for DOS real mode ............................. 30
F. BIOS Default Setting .................................................. 31
Warranty ............................................................................................ 32
Page 4
This page is blank
Page 5
VDX-6318RD Vortex86DX Tiny CPU Module
1
C h a p t e r 1
Introduction
1.1 Packing List
Product Name Package
VDX-6318RD
&
VDX-6318RD-512
Embedded Vortex86DX CPU All-in-One Board
Manual & Drivers CD x 1
RS232 cable x 4
IDE cable x 1
USB cable x 2
(U S B po rt x 2
)
VGA cable x 1
GPIO cable x2
AUDIO Line x2
PS/2 Mouse cable x 1
PS/2 Keyboard cable x 1
Page 6
VDX-6318RD Vortex86DX Tiny CPU Module
2
1.2 Product Description
The VDX-6318RD family of low-power x86 embedded controller is designed to meet Tiny
specification, and integrated with the following features.
800MHz Vortex86DX System-On-Chip
256/ 512MB DDR2 system memory
VGA, TFT LCD support up to
1280x1024 resolution
Enhanced IDE (UltraDMA-100/66/33)
10/100Mbps Ethernet
3 USB 2.0 (host)
Up to 4 serial ports
16-bit GPIO x 2
Audio
2 watchdog timer
PWM 24~32 channels
JTAG interface
AMI BIOS
4MB SPI flash
Single voltage +5V DC
Support extended operating
temperature range of -20°C to +70°C
The VDX-6318RD Tiny family of embedded controller is designed with backward compatibility in
mind to provide migration path for projects facing end-of-life challenges with their existing x86
based Tiny controller. The VDX-6318RD family of controller is designed as a plug in replacement
with backward compatibility to support legacy software to help extend existing product life cycle
without heavy re-engineering.
VDX-6318RD is suitable for broad range of data-acquisition, Industrial automation, Process
control, Automotive controller, AVL, Intelligent Vehicle management devic,Medical device,
Human machine interface, Robotics, machinery control And more…application that required
small footprint, low-power and low-cost hardware with open industry standard such as Tiny.
Page 7
VDX-6318RD Vortex86DX Tiny CPU Module
3
1.3 Specifications
Features VDX-6318RD
CPU
DM&P SoC CPU Vortex86
DX- 8
00MHz
Real T ime Clock w ith Lithium Battery Backup
Cache
L1:1 6K I
-
Cach e , 16K D
-
Cache
L2:128KB
Cach e
BIOS
AMI BIOS
System Memory
256/ 5 12
MB DDR2
O
nbo a rd
Watchdog Timer
Softwa re programmable from 30.5
us
to 51 2 seconds x2
se ts(Watchdog 1 fully compatible with M6117 D)
VGA
XGI Volari Z9s Chipset
VGA and TFT Flat Panel Interface Support
LVDS Flat Panel Inte rface Support (Optional)
Onbo a rd 32MB VGA Memo ry
Supp o rt resolution up to 1 2 80 x 1024,16MB colors
LAN
In teg rated 10/100M Ethernet
Audio
CM11 9 USB Audio contro ller
I /O Interface
Enha n ced IDE port (U ltraDMA-100/66/33) x1
RS-2 32 port x3
RS-2 32/422/485 port x1 (RS485 with Auto Dire ction)
USB port x3 (USB 2 .0 version)
16-b it GPIO port x2
10/1 00Mbps Ethernet port x1
Connectors
2.0 0 m m ∅ 44-pin box header for IDE x1
2.0 0 m m ∅ 44-pin box header for LCD x 1
2.0 0 m m ∅ 10-pin box header for VGA x1
2.0 0 m m ∅ 20-pin box header for 16-bit GPIO x2
2.0 0 m m ∅ 10-pin box header for RS-232 x4
2.0 0 m m ∅ 10-pin box header for USB x2
2.0 0 m m ∅ 2-pin header for C o nsole Redirectio n x1
2.5 4 m m ∅ 5-pin box header fo r keyboard x1
2.5 4 m m ∅ 5-pin header for M o use x1
2.5 4 m m ∅ 2-pin header for R e set x1
1.2 5 m m ∅ 6-pin Wafer for JTAG x1
1.2 5 m m ∅ 4-pin Wafer for L in e -ou t/MIC-in x2
Exte rn a l RJ-45 connector for Ethernet x1
Flash Disk Support
Onboard 4MB SPI Flash Disk (Dr iver: A)
44-p in IDE Flash Disk( E m b e dDisk 16MB or a bove )
44-p in IDE to Micro SD (O p tiona l)
PWM
24~32 Channels
Power Requirement
Sin g le Vo ltage +5V
@ 740mA
Dimension
100m m X 66mm (3.94 x2 .6 inches)
Weight
63g
Operating
Temperature
-
20oC ~ +70
o
C
-4 0 ° C ~ +85°C (Optional)
Page 8
VDX-6318RD Vortex86DX Tiny CPU Module
4
1.4 Board Dimension
Page 9
VDX-6318RD Vortex86DX Tiny CPU Module
5
C h a p t e r 2
Installation
2.1 Board Outline
(Note1: USB 3 is occupied by Audio)
(Note2: If you Enable 4M SPI flash Disk on the BIOS setting, you
cannot use GP30~GP37 Pins)
(Note3: GP25~GP27 will be occupied by RS-232/422/485 setting)
(Note4: COM2 RS232/422/485 is selected by BIOS setting)
(Note5: VDX-6318RD-512 is optional)
Page 10
VDX-6318RD Vortex86DX Tiny CPU Module
6
2.2 Connectors & Jumpers Location
Connectors
Page 11
VDX-6318RD Vortex86DX Tiny CPU Module
7
Jumpers & LEDs
Page 12
VDX-6318RD Vortex86DX Tiny CPU Module
8
2.3 Connectors & Jumpers Summary
Summary Table
Nbr Description Type of Connections
Pin
nbrs.
J1 IDE Box Header, 2.0∅ ,22x2 44-pin
J2 USB 2/ 3 Box Header,2.0∅ , 5x2 10-pin
J4 LAN RJ45 Connector 8-pin
J5 JTAG Wafer, 1.25∅ , 6x1 6-pin
J8 PS/2 Keyboard Box Header, 2,54∅,1x5 5-pin
J9 Buzzer Pin Header, 2,54∅,1x2 2-pin
J10 PS/2 Mouse Pin Header, 2,54∅,1x5 5-pin
J11 COM1(TTL/GPIO-P4/ PWMx8)
Box Header, 2.0∅ 5x2 10-pin
J12
COM2(RS232/RS485/RS422) Box Header, 2.0∅ 5x2 10-pin
J13 GPIO ( Port 0 / 1 /PWMx16) Box Header, 2.0∅ ,10x2 20-pin
J16 Reset Pin Header, 2,54∅,1x2 2-pin
J17 Power Connector Terminal Block 5.0∅,2x1 2-pin
J18 COM3 Box Header, 2.0∅ 5x2 10-pin
J19 COM4 Box Header, 2.0∅ 5x2 10-pin
J21 VGA Pin Header, 2.0∅ ,5x2 10-pin
J22 USB 0 / 1 Box Header,2.0∅ , 5x2 10-pin
J23 GPIO (Port 2 / 3 ) Box Header, 2.0∅ ,10x2 20-pin
J24 LCD Box Header, 2.0∅ ,22x2 44-pin
J25 LINE-OUT Wafer, 1.25∅ , 4x1 4-pin
J26 MIC-IN Wafer, 1.25∅ , 4x1 4-pin
J27 Console Redirection Pin Header, 2,54∅,1x2 2-pin
PWR-
LED
Power Active LED (Red) LED-SMD
IDELED
IDE Active LED (Green ) LED-SMD
Page 13
VDX-6318RD Vortex86DX Tiny CPU Module
9
2.4 Pin Assignments & Jumper Settings
J1: IDE (44 Pins)
J2: USB 2 / 3
Pin # Signal Name Pin # Signal Name
1 VCC
2
VCC
3 LUSBD
2- 4
LUSBD
3-
5 LUSBD
2+ 6 LUSBD
3+
7 GND
8
GND
9 G
GND
10 GGND
Note
USB 3 is occupied by Audio.
Pin # Signal Name Pin # Signal Name
1 IDERST
2
GND
3 IDED7
4
IDED8
5 IDED6
6
IDED9
7 IDED5
8
IDED10
9 IDED4
10
IDED11
11 IDED3
12
IDED12
13 IDED2
14
IDED13
15 IDED1
16
IDED14
17 IDED0
18
IDED15
19 GND
20 NC
21 IDEREQ
22
GND
23 IDEIOW
24
GND
25 IDEIOR
26
GND
27 ICHRDY
28
GND
29 IDEACK
30
GND
31 IDEINT
32 NC
33 IDESA1
34
IDECBLID
35 IDESA0
36
IDESA2
37 IDECS
-0 38
IDECS1
39 IDELED
40
GND
41 VCC
42
VCC
43 GND
44 NC
Page 14
VDX-6318RD Vortex86DX Tiny CPU Module
10
J5: JTAG
Pin # Signal Name Pin # Signal Name
1 VCC 2 GND
3 TCK 4 TDO
5 TDI 6 TMS
J8: PS/2 Keyboard
Pin # Signal Name Pin # Signal Name
1 KBCLK
2
KBDAT
3 NC 4 GND
5 VCC
J9: Buzzer
Pin # Signal Name Pin # Signal Name
1 Buzzer 2 VCC
J10: PS/2 Mouse
Pin # Signal Name Pin # Signal Name
1 MS
CLK
2
MSDATA
3 NC 4 GND
5 VCC
J11: COM 1 (Optional: TTL/ GPIO-P4 / PWMx8)
Pin #
Signal
Name
Pin #
Signal
Name
1 DCD1
2 RXD1
3 TXD1
4 DTR1
5 GND 6 DSR1
7 RTS1
8 CTS1
9 RI1 10 NC
Page 15
VDX-6318RD Vortex86DX Tiny CPU Module
11
J12: COM2 RS232 / RS422 / RS485 (Optional: TTL)
Pin #
Signal Name Pin #
Signal Name
1 DCD2/ 422TX- / RS485-
2 RXD2 / 422TX+ / RS485+
3 TXD2 / 422RX+ 4 DTR2 / 422RX-
5 GND 6 DSR2
7 RTS2 8 CTS2
9 RI2 10 NC
J13: GPIO (Port 0 / 1 / PWMx16 )
J16: RESET
Pin # Signal Name Pin # Signal Name
1 Reset 2 GND
J17: Power Connector (Terminal Block 5.0mm)
Pin # Signal Name
1 +5V
2 GND
Pin # Signal Name Pin # Signal Name
1 GND 2 VCC
3 GP00 4 GP10
5 GP01 6 GP11
7 GP02 8 GP12
9 GP03 10
GP13
11 GP04 12
GP14
13 GP05 14
GP15
15 GP06 16
GP16
17 GP07 18
GP17
19 VCC 20
GND
Page 16
VDX-6318RD Vortex86DX Tiny CPU Module
12
J18: COM3 (Optional: TTL)
Pin # Signal Name Pin # Signal Name
1 DCD3 2 RXD3
3 TXD3 4 DTR3
5 GND 6 DSR3
7 RTS3 8 CTS3
9 RI3 10
NC
J19: COM4 (Optional: TTL)
Pin # Signal Name Pin # Signal Name
1 DCD4 2 RXD4
3 TXD4 4 DTR4
5 GND 6 DSR4
7 RTS4 8 CTS4
9 RI4 10
NC
J21: VGA
Pin #
Signal
Name
Pin #
Signal
Name
1 R OUT
2 GND
3 G OUT
4 GND
5 B OUT
6 GND
7 HSYNC
8 GND
9 VSYNCD
10 GND
J22: USB 0 / 1
Pin # Signal Name Pin # Signal Name
1 VCC
2
VCC
3 LUSBD
0- 4
LUSBD
1-
5 LUSBD
0+ 6 LUSBD
1+
7 GND
8
GND
9 G
GND
10 GGND
Page 17
VDX-6318RD Vortex86DX Tiny CPU Module
13
23: GPIO (Port 2 / Port 3)
Note:
-If you Enable 4M SPI flash Disk on the BIOS setting, you cannot use GP30~GP37 Pins.
-GP25~GP27 will be occupied by RS-232/422/485 setting.
Pin # Signal Name Pin #
Signal Name
1 GND 2 VCC
3 GP20 4 SPICS / GP30
5 GP21 6 SPICLK / GP31
7 GP22 8 SPID0 / GP32
9 GP23 10
SPIDI / GP33
11 GP24 12
GP34
13 232 / GP25 14
GP35
15 422 / GP26 16
GP36
17 485 / GP27 18
GP37
19 VCC 20
GND
Page 18
VDX-6318RD Vortex86DX Tiny CPU Module
14
J24: LCD (DVO) Connector
Pin # Signal Name Pin # Signal Name
1 +3.3V 2 +3.3V
3 LG2 4 LG3
5 LG4 6 LG5
7 NC 8 NC
9 LR0 10
LR1
11 LR2 12
LR3
13 LR4 14
LR5
15 GND 16
NC
17 NC 18
NC
19 NC 20
GND
21 NC 22
NC
23 LB0 24
LB1
25 LB2 26
LB3
27 LB4 28
LB5
29 NC 30
NC
31 LG0 32
LG1
33 GND 34
GND
35 NC 36
LCLK
37 NC 38
LDE
39 NC 40
LHSYNC
41 NC 42
LVSYNC
43 LBACKL 44
LVDDEN
(Please refer to Appendix A, for TFT Flat Panel Data Output)
J25: LINE OUT
Pin # Signal Name
1 LOUTR
2 GND
3 GND
4 LOUTL
Page 19
VDX-6318RD Vortex86DX Tiny CPU Module
15
J26: MIC-IN
Pin # Signal Name
1 MICVREF
2 GND
3 GND
4 MIC-IN
J27: Console Redirection (Pin 1 & Pin 2 short)
Pin # Signal Name Pin # Signal Name
1 Console_Red 2 GND
Page 20
VDX-6318RD Vortex86DX Tiny CPU Module
16
2.5 System Mapping
Page 21
VDX-6318RD Vortex86DX Tiny CPU Module
17
Page 22
VDX-6318RD Vortex86DX Tiny CPU Module
18
Page 23
VDX-6318RD Vortex86DX Tiny CPU Module
19
2.6 Watchdog Timer
There are two watchdog timers in Vortex86SX/DX CPU. One is compatible with M6117D
watchdog timer and the other is new. The M6117D compatible watchdog timer is called WDT0
and new one is called WDT1.
We also provide DOS, Linux and WinCE example for your reference. For more technical support,
please visit: http://www.dmp.com.tw/tech or download the PDF file:
http://www.dmp.com.tw/tech/vortex86dx/
Page 24
VDX-6318RD Vortex86DX Tiny CPU Module
20
2.7 GPIO (General Purpose Input / Output)
40 GPIO pins are provided by the Vortex86SX/DX for general usage in the system. All GPIO pins
are independent and can be configured as inputs or outputs, with or without pull-up/pull-down
resistors.
We also offer DOS, Linux and WinCE example for your reference. For more technical support,
please visit: http://www.dmp.com.tw/tech or download the PDF file:
http://www.dmp.com.tw/tech/vortex86dx/
Page 25
VDX-6318RD Vortex86DX Tiny CPU Module
21
2.8 SPI flash (Serial Peripheral Interface)
As SPI Flash (Serial Peripheral Interface) offers many benefits including: reduced controller pin
count, smaller and simpler PCBs, reduced switching noise, less power consumption, and lower
system cost
Many of users may consider using a formatted SPI flash to boot for the system or emulate SPI
flash as Floppy (A: Driver or B: Driver). Then you must know how to set for this condition in
CMOS Setup and boot up under DOS 6.22, X-DOS, DR-DOS and Free DOS.
For more technical support, please visit: http://www.dmp.com.tw/tech or download the PDF file:
http://www.dmp.com.tw/tech/vortex86dx/
Page 26
VDX-6318RD Vortex86DX Tiny CPU Module
22
2.9 PWM (Pulse-width modulation)
Pulse-width modulation (PWM) of a signal or power source involves the modulation of its duty
cycle, to either convey information over a communications channel or control the amount of
power sent to a load.
The popular applications of pulse width modulation are in speed control of electric motors,
volume control of Class D audio amplifiers or brightness control of light sources and many other
power electronics applications.
The Vortex86DX SoC integrated 32 channels of PWM interface enabling the Automation, robotic
industry to a New Age x86 SoC platform and we also offer the sample code of PWM which will
guide the engineer to control the PWM functionality smoothly.
For more inquire of this sample code that please contact our sales team or mail to:
info@icop.com.tw
Page 27
VDX-6318RD Vortex86DX Tiny CPU Module
23
3.0 IDE to SD (Micro-SD)
Vortex86DX SoC also built-in simulation circuit to adapt SD to IDE in order to allow your system
to recognize Micro-SD card as C: or D: Driver
SD-1917: 44 pins IDE to SD Adapter is an ideal solution for industrial PC or embedded system
and 44 pins IDE to SD Adapter can be easily installed on all Vortex86DX-63xx CPU boards. You
or your customers just do the BIOS setting and use SD-1917 to connect IDE connector of
Vortex86DX-63xx directly.
For further inquiries of SD-1917, please contact ICOP sales team or mail to: info@icop.com.tw
for your request.
<BIOS setting>
Get into the BIOS setup Utility
Choose Primary IDE Pin Select: SD card
Press “F10” to Save configuration changes and exit setup
SD-1917:
http://www.icop.com.tw/pddetail.aspx?id=125&pid=4
SD-1917
Page 28
VDX-6318RD Vortex86DX Tiny CPU Module
24
C h a p t e r 3
Driver Installation
VGA
The Vortex86DX processor also use external Display chip ““Volari™ Z9s” which is an ultra low
powered graphics chipset with total power consumption at around 1-1.5 W. It is capable in
providing VGA display output upto 1600x1200. With DVO interface, developers could easily
connect flat Panel to support TFT and LVDS output.
LAN
The Vortex86DX processor also integrated 10/100Mbps Ethernet controller that supports both
10/100BASE-T and allows direct connection to your 10/100Mbps Ethernet based Local Area
Network for full interaction with local servers, wide area networks such as the Internet.
I/O and IRQ settings can be done by software with the supplied utility software, or it can be set
for Plug and Play compatibility. The controller supports: Half / Full-Duplex Ethernet function to
double channel bandwidth, auto media detection.
AUDIO
CM119 is a highly integrated single chip USB audio controller specifically for VoIP (Voice over
internet protocol) application. All essential analog modules are embedded in CM119, including
dual DAC and earphone driver, ADC, microphone booster, PLL, regulator, and USB transceiver.
8 GPIO pins can constitute a 24 key matrix directly support keypad control function without MCU.
Operating system support
The Vortex86DX-6318RD Tiny CPU board provides the VGA and LAN drivers for DOS 6.22
Windows CE 5.0, CE 6.0, Windows 98, Windows XP Professional, Windows Embedded standard
(XPE) and Windows 2000.
Please get the drivers from the Driver CD which attached with the standard packing of
Vortex86DX-6318RD board or please get it from DMP official website:
http://www.dmp.com.tw/tech/vortex86dx/
Vortex86DX-6318RD also supports most of the popular Linux distributions, for more detail
information, please visit DMP official website: http://www.dmp.com.tw/tech/vortex86dx/
.
Page 29
VDX-6318RD Vortex86DX Tiny CPU Module
25
Appendix
A. TFT Flat Panel Data Output
Page 30
VDX-6318RD Vortex86DX Tiny CPU Module
26
B.TFT Flat Panel Support List
Size Brand Resolution Model No.
5.7” Data image 320x240 FG050701DSSWBG01
5.7” Optrex 320x240 55264GD057J-FW-ABN
5.7” TOSHIBA 320x240 LTA057A343F
5.7” Sharp 320x240 (QVGA / VGA) LQ057Q3DC02
5.7” Kyocera 320x240 (QVGA / VGA) TCG057QV1AC-G10
5.7” PVI 320x240 (QVGA / VGA) PD057VU4 /U5
5.7” Data image 640x480 FG050710DSSWJG01/DG01
5.7” Ampire 640x480 AM-640480GTMQW-T00H
5.7” URT 640x480 UMSH-8004MD-T
5.7” Sharp 640x480 LQ057V3DG01
5.7” CPT 640x480 CLAA057VA01
6.4” PVI 640x480 V16C6448AC
6.4” LG-PHILIPS 640x480 LB064V02
6.4” PVI 640x480 PD064VT2 /VT4 /VT5
6.4” Sharp 640x480 LQ064V3DG01
7” AUO 800x480 C070VW02V0
7” Data image 800x480 FG0700A0DSSWBG01
7” LG-PHILIPS 800x480 (TFT 24 bits) LB070WV1
7” HITACHI 800x480 TX18D57VM2BAA
7” Samsung 800x480 LMS700KF05
7” PVI 800x480 PM070WL4
7” URT 800x480 UMSH-8173MD-1T
7” CHI HSIN 800x480 LW700AT9309
8” Sharp 640x480 LQ080V3DG01
Page 31
VDX-6318RD Vortex86DX Tiny CPU Module
27
Size Brand Resolution Model No.
8” AUO 800x600 (TFT 24bits) A080SN01 V0
8.4” Sharp 800x600 LQ084S3DG01
10.4” PVI 640x480 PD104VT1/VT2
10.4” NEC 640x480 NL6448AC33-18
10.4” NEC 640x480 NL6448AC33-29
10.4” NEC 640x480 NL6448BC33-59
10.4” Sharp 640x480 LQ104V1DG51/DG61
10.4” Sharp 640x480 LQ10d368
11” Sharp 800x480 LQ110Y3DG01
12.1” NEC 800x600 NL8060BC31-01
Page 32
VDX-6318RD Vortex86DX Tiny CPU Module
28
C. LVDS Flat Panel Support List
If you would like to use LVDS Flat Panel with Vortex86SX / Vortex86DX series, please contact
our regional sales to get ICOP-0096 information or visit ICOP website:
http://www.icop.com.tw/pddetail.aspx?id=65&pid=4
ICOP–0096
: 18-bit TFT to LVDS converter and Cable-LVDS-30: LVDS Cable 30cm
Approved LVDS Flat Panel List
Size Brand Resolution Model No.
3.5” PVI 640x480 PD035VL1
5” PVI 640x480 PD050VL1
6.5” AUO 640x480 G065VN01
8.4” AUO 800x600 G084SN03
8.9” AUO 1024x600 A089SW01
8.9” CPT 1024x600 CLAA089NA0ACW
10.4” AUO 800x600 G104SN02
12.1” AUO 800x600 G121SN01
15” AUO 1024x768 G150XG01
Page 33
VDX-6318RD Vortex86DX Tiny CPU Module
29
D. Flat Panel Wiring and Lighting
Hardware
Before you connect the TFT LCD Flat Panel with Vortex86DX-6318RD, please make sure
that the input Voltage of LCD is 3.3V or Not
BIOS
Please contact or e-mail our regional sales to get the special BIOS for any TFT LCD
Flat Panels.
Wiring LCD Cable
Please refer to Page 14 (J24: LCD connector) and Page 25~29. Or for more LCD lighting
and integration service, please contact our regional sales or mail to info@icop.com.tw ,if
you have any questions.
Page 34
VDX-6318RD Vortex86DX Tiny CPU Module
30
E. TCP/IP library for DOS real mode
DSock is a TCP/IP library for DOS real mode, which is used by RSIP. It provides simple C
functions for programmer to write Internet applications. ICOP also provide Internet examples
using DSock: BOOTP/DHCP, FTP server, SMTP client/server, HTTP server, TELNET server,
Talk client/server, etc.
DSock provides a lot of example source code. Programmer can add Internet functions to their
project easily and save development time. With a utility "MakeROM”, programmer also can make
a ROM image to fit their application, those examples can be seen in the following Application
systems: Mity-Mite Serial Server, Web Camera Tiny Server and RSIP Serial Server.
DSock is free for All ICOP products using M6117D/Vortex86/Vortex86SX/Vortex86DX CPU and
ICOP also provide the business version of DSock for those customers who are using other x86
CPUs.
If you would like to use DSock or business version of DSock, Please mail to info@icop.com.tw or
contact your regional sales.
Please download the trial DSock software and Utilities from our website:
http://www.dmp.com.tw/tech/dmp-lib/dsock/
Page 35
VDX-6318RD Vortex86DX Tiny CPU Module
31
F. BIOS Default setting
If the system cannot be booted after BIOS changes are made, Please follow below procedures in
order to restore the CMOS as default setting.
Press “End” Key, when the power on
Press <Del> to enter the AMI BIOS setup
Press “F9” to Load Optimized Defaults
Press “F10” to Save configuration changes and exit setup
Page 36
VDX-6318RD Vortex86DX Tiny CPU Module
32
Warranty
This product is warranted to be in good working order for a period of one year from the date of
purchase. Should this product fail to be in good working order at any time during this period, we
will, at our option, replace or repair it at no additional charge except as set forth in the following
terms. This warranty does not apply to products damaged by misuse, modifications, accident or
disaster. Vendor assumes no liability for any damages, lost profits, lost savings or any other
incidental or consequential damage resulting from the use, misuse of, originality to use this
product. Vendor will not be liable for any claim made by any other related party. Return
authorization must be obtained from the vendor before returned merchandise will be accepted.
Authorization can be obtained by calling or faxing the vendor and requesting a Return
Merchandise Authorization (RMA) number. Returned goods should always be accompanied by a
clear problem description.
Loading...