Page 1
VDX-6317RD-X
DM&P Vortex86DX 800MHz
Mity-Mite CPU Module
with 1S/USB/LAN/GPIO/PWMx16
256MB DDR2 Onboard
User’s Manual
(Revision 1.1A)
Page 2
Copyright
The information in this manual is subject to change without notice for continuous improvement in
the product. All rights are reserved. The manufacturer assumes no responsibility for any
inaccuracies that may be contained in this document and makes no commitment to update or to
keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part,
in any form or by any means without the prior written permission of the ICOP Technology Inc..
Copyright 2008 ICOP Technology Inc.
Manual No. IUM6317D000-01 Ver.1.0A March, 2011
Manual No. IUM6317RD000-01 Ver.1.1A September, 2014
Trademarks Acknowledgment
Vortex86DX is the registered trademark of ICOP Technology Inc.
Other brand names or product names appearing in this document are the properties
and registered trademarks of their respective owners. All names mentioned herewith
are served for identification purpose only.
Page 3
T a b l e o f C o n t e n t s
T a b l e o f C o n t e n t s ............................................................. iii
C h a p t e r 1 Introduction……………………………………………1
1.1 Packing List ............................................................ 1
1.2 Product Description ................................................ 2
1.3 Specifications ......................................................... 3
1.4 Board Dimension .................................................... 4
C h a p t e r 2 Installation……………………………………………..5
2.1 Board Outline ......................................................... 5
2.2 Connectors & Jumpers Location .................... ........6
2.3 Connectors & Jumpers Summary ........................... 8
2.4 Pin Assignments & Jumper Settings ....................... 9
2.5 System Mapping ................................................. 133
2.6 Watchdog Timer ................................................... 16
2.7 GPIO .................................................................... 17
2.8 SPI flash ............................................................... 18
2.9 PWM .................................................................... 19
3.0 IDE to SD ............................................................. 20
C h a p t e r 3 Driver Installation……………………………………21
Appendix ………………………………………………………………..22
A. TCP/IP library for DOS real mode ............................. 22
B. BIOS Default Setting ................................................. 23
Warranty ............................................................................................ 24
Page 4
This page is blank
Page 5
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
1
C h a p t e r 1
Introduction
1.1 Packing List
Product Name Package
VDX-6317RD-X
Embedded Vortex86DX CPU All -in-One Board
Manual & Drivers CD x 1
RS232 cable x 1
IDE cable x 1
GPIO cable x 1
PS/2 Keyboard cable x 1
USB cable x 1
(O p t io n a l)
Page 6
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
2
1.2 Product Description
The VDX-6317RD-X family of low-power x86 embedded controller is designed to meet Tiny
specification, and integrated with the following features.
800MHz Vortex86DX System-On-Chip
256MB DDR2 system memory
Enhanced IDE (UltraDMA-100/66/33)
10/100Mbps Ethernet
1 USB 2.0 (host)
Up to 1 serial ports
16-bit GPIO x1
x-ISA bus
2 watchdog timer
PWM 16 channels
JTAG interface
AMI BIOS
4MB SPI flash
Single voltage +5V DC
Support extended operating
temperature range of -20°C to +70°C
The VDX-6317RD-X Tiny family of embedded controller is designed with backward compatibility
in mind, to provide migration path for projects facing end-of-life challenges with their existing x86
based Mity-Mite controller. The VDX-6317RD-X family of controller is designed as a plug in
replacement, with backward compatibility to support legacy software to help extend existing
product life cycle without heavy re-engineering.
VDX-6317RD-X is suitable for broad range of data-acquisition, Industrial automation, Process
control, Automotive controller, AVL, Intelligent Vehicle management devic,Medical device,
Human machine interface, Robotics, machinery control And more…application that required
small footprint, low-power and low-cost hardware with open industry standard such asTiny.
Page 7
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
3
1.3 Specifications
Features VDX-6317RD-X
CPU
DM&P SoC CPU Vortex86DX- 800MHz
Real Time Clock with Lithium Battery Backup
Cache
L1:16K I-Cache, 16K D-Cache L2:128KB Cache
BIOS
AMI BIOS
Bus Interface
16-bit x-ISA interface
System Memory
256MB DDR2 Onboard
Watchdog Timer
Software programmable from 30.5 us to 512 seconds x2
sets(Watchdog 1 fully compatible with M6117D)
LAN
Integrated 10/100M Ethernet
I /O Interface
Enhanced IDE port (UltraDMA-100/66/33) x1
RS-232 port x1
USB port x1 (USB 2.0 version)
16-bit GPIO port x1
10/100Mbps Ethernet port x1
Connectors
2.00 mm ∅ 44-pin box header for IDE x1
2.00 mm ∅ 20-pin box header for 16-bit GPIO x1
2.00 mm ∅ 10-pin box header for RS-232 x1
2.00 mm ∅ 4-pin header for USB x1
2.54 mm ∅ 5-pin header for keyboard x1
1.25mm ∅ 6-pin Wafer for JTAG x1
External RJ-45 connector for Ethernet x1
Flash Disk Support
Onboard 4MB SPI Flash Disk (Driver: A)
44-pin IDE Flash Disk( EmbedDisk 16MB or above)
44-pin IDE to Micro SD (Optional)
PWM
16~24 Channels
Power Requirement
Single Voltage +5V
@
380mA
Dimension
80mm X 50mm (3.14 x1.96 inches)
Weight
42g
Operating
Temperature
-20oC ~ +70oC
-40°C ~ +85°C (Optional)
Page 8
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
4
1.4 Board Dimension
Page 9
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
5
C h a p t e r 2
Installation
2.1 Board Outline
Note
1. VGA, ICOP-2820, function support via x-ISA Interface
ICOP-2820:
http://www.icop.com.tw/en/product/Processor-Module-ICOP-2820/ICOP
-2820.html
2. 2.0MM 4-pin header USB cbale (P/N: USB(2.0)-1) is optional
Page 10
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
6
2.2 Connectors & Jumpers Location
Connectors
Page 11
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
7
Jumpers & LEDs
Page 12
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
8
2.3 Connectors & Jumpers Summary
Summary Table
Nbr Description Type of Connections Pin nbrs.
J1 GPIO (Port 0 / 1/ PWMx16) Box Header, 2.0∅ ,10x2 20-pin
J2 x-ISA Connector – 64 pin Box Header, 2.0∅, 32x2 64-pin
J3 PS/2 Keyboard Pin Header, 2,54∅,1x5 5-pin
J4 Power Connector Terminal Block 5.0∅,2x1 2-pin
J5 Buzzer Pin Header, 2,0∅,1x2 2-pin
J6 IDE Box Header, 2.0∅ ,22x2 44-pin
J7 COM1(TTL / PWMx8 Optional)
Box Header, 2.0∅ 5x2 10-pin
J9 Console Redirection Pin Header, 2.54∅ , 2x1 2-pin
JP1 USB Pin Header, 2,0∅,4x1 4-pin
JP2 JTAG Wafer, 1.25∅ , 6x1 6-pin
LAN 10/100Base-T Ethernet LAN RJ45 Connector 8-pin
PWR-LED Power Active LED (Red) LED-SMD
IDE- LED IDE Active LED (Green ) LED-SMD
LED 2 LAN Duplex LED ( Yellow ) LED-SMD
LED 3 LAN Link/Active LED (Green)
LED-SMD
Page 13
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
9
2.4 Pin Assignments & Jumper Settings
J1: GPIO (Port 0 / 1/ PWMx16)
J2: x-ISA Connector – 64pin
Pin # Signal Name Pin # Signal Name
1 GND
2
SBHE
3 RSTDRV
4
SD7
5 VCC
6
SD6
7 SD8
8
SD5
9 SD9
10
SD4
11 SD10
12
SD3
13 SD11
14
SD2
15 SD12
16
SD1
17 SD13
18
SD0
19 GND
20
IOCHRDY
21 SMEMW
22
AEN
23 SMEMR
24
SA19
25 IOW
26
SA18
27 IOR
28
SA17
29 SD14
30
SA16
31 SD15
32 SA15
33 MEMCS16
34
SA14
35 ICOS16
36
SA13
37 REFRESH
38
SA12
Pin # Signal Name Pin # Signal Name
1 GND 2 VCC
3 GP00 4 GP10
5 GP01 6 GP11
7 GP02 8 GP12
9 GP03 10
GP13
11 GP04 12
GP14
13 GP05 14
GP15
15 GP06 16
GP16
17 GP07 18
GP17
19 VCC 20
GND
Page 14
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
10
39 SYSCLK
40
SA11
41 IRQ7
42
SA10
43 IRQ6
44
SA9
45 IRQ5
46
SA8
47 IRQ4
48
SA7
49 IRQ3
50
SA6
51 IRQ10
52
SA5
53 IRQ11
54
SA4
55 BALE
56
SA3
57 VCC
58
SA2
59 OSC
60
SA1
61 GND
62
SA0
63 IRQ12
64
IRQ14
J3: PS/2 Keyboard
Pin # Signal Name Pin # Signal Name
1 KBCLK
2
KBDAT
3 NC 4 GND
5 VCC
J4: Power Connector (Terminal Block 5.0mm)
Pin # Signal Name
1 +5V
2 GND
Page 15
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
11
J6: IDE (44 Pins)
J7: COM 1 (TTL / PWMx8 Optional)
Pin #
Signal
Name
Pin #
Signal
Name
1 DCD1
2 RXD1
3 TXD1
4 DTR1
5 GND 6 DSR1
7 RTS1
8 CTS1
9 RI1 10 NC
Pin # Signal Name Pin # Signal Name
1 IDERST
2
GND
3 IDED7
4
IDED8
5 IDED6
6
IDED9
7 IDED5
8
IDED10
9 IDED4
10
IDED11
11 IDED3
12
IDED12
13 IDED2
14
IDED13
15 IDED1
16
IDED14
17 IDED0
18
IDED15
19 GND
20 NC
21 IDEREQ
22
GND
23 IDEIOW
24
GND
25 IDEIOR
26
GND
27 ICHRDY
28
GND
29 IDEACK
30
GND
31 IDEINT
32 NC
33 IDESA1
34
IDECBLID
35 IDESA0
36
IDESA2
37 IDECS
-0 38
IDECS1
39 IDELED
40
GND
41 VCC
42
VCC
43 GND
44 NC
Page 16
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
12
J9: Console Redirection
Pin # Signal Name Pin # Signal Name
1 Console 2 GND
JP1: USB
Pin # Signal Name Pin # Signal Name
1 VCC
2
LUSBD
3-
3 LUSBD
3+ 4
GND
JP2: JTAG
Pin # Signal Name Pin # Signal Name
1 VCC 2 GND
3 TCK 4 TDO
5 TDI 6 TMS
Page 17
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
13
2.5
System Mapping
Page 18
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
14
Page 19
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
15
Page 20
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
16
2.6 Watchdog Timer
There are two watchdog timers in Vortex86SX/DX CPU. One is compatible with M6117D
watchdog timer and the other is new. The M6117D compatible watchdog timer is called WDT0
and new one is called WDT1.
We also provide DOS, Linux and WinCE example for your reference. For more technical support,
please visit: http://www.dmp.com.tw/tech or download the PDF file:
http://www.dmp.com.tw/tech/vortex86dx/
Page 21
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
17
2.7 GPIO (General Purpose Input / Output)
40 GPIO pins are provided by the Vortex86SX/DX for general usage in the system. All GPIO pins
are independent and can be configured as inputs or outputs, with or without pull-up/pull-down
resistors.
We also offer DOS, Linux and WinCE example for your reference. For more technical support,
please visit: http://www.dmp.com.tw/tech or download the PDF file:
http://www.dmp.com.tw/tech/vortex86dx/
Page 22
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
18
2.8 SPI flash (Serial Peripheral Interface)
As SPI Flash (Serial Peripheral Interface) offers many benefits including: reduced controller pin
count, smaller and simpler PCBs, reduced switching noise, less power consumption, and lower
system cost
Many of users may consider using a formatted SPI flash to boot for the system or emulate SPI
flash as Floppy (A: Driver or B: Driver). Then you must know how to set for this condition in
CMOS Setup and boot up under DOS 6.22, X-DOS, DR-DOS and Free DOS.
For more technical support, please visit: http://www.dmp.com.tw/tech or download the PDF file:
http://www.dmp.com.tw/tech/vortex86dx/
Page 23
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
19
2.9 PWM (Pulse-width modulation)
Pulse-width modulation (PWM) of a signal or power source involves the modulation of its duty
cycle, to either convey information over a communications channel or control the amount of
power sent to a load.
The popular applications of pulse width modulation are in speed control of electric motors,
volume control of Class D audio amplifiers or brightness control of light sources and many other
power electronics applications.
The Vortex86DX SoC integrated 32 channels of PWM interface enabling the Automation, robotic
industry to a New Age x86 SoC platform and we also offer the sample code of PWM which will
guide the engineer to control the PWM functionality smoothly.
For more inquire of this sample code, please contact our sales team or mail to: info@icop.com.tw
Page 24
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
20
3.0 IDE to SD (Micro-SD)
Vortex86DX SoC also built-in simulation circuit to adapt SD to IDE in order to allow your system
to recognize Micro-SD card as C: or D: Driver
SD-1917: 44 pins IDE to SD Adapter is an ideal solution for industrial PC or embedded system
and 44 pins IDE to SD Adapter can be easily installed on all Vortex86DX-63xx CPU boards. You
or your customers just do the BIOS setting and use SD-1917 to connect IDE connector of
Vortex86DX-63xx directly.
For further inquiries of SD-1917, please contact ICOP sales team or mail to: info@icop.com.tw
for your request.
<BIOS setting>
Get into the BIOS setup Utility
Choose Primary IDE Pin Select: SD card
Press “F10” to Save configuration changes and exit setup
SD-1917:
http://www.icop.com.tw/en/product/Accessories-SD-1917/SD-1917.html
SD-1917
Page 25
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
21
C h a p t e r 3
Driver Installation
LAN
The Vortex86DX processor also integrated 10/100Mbps Ethernet controller that supports both
10/100BASE-T and allows direct connection to your 10/100Mbps Ethernet based Local Area
Network for full interaction with local servers, wide area networks such as the Internet.
The controller supports: Half / Full-Duplex Ethernet function to double channel bandwidth, auto
media detection.
Operating system support
The VDX-6317RD-X Tiny CPU board supports Embedded software: Free DOS, DOS 6.22,
PCDOS 7.1, DR-DOS,x-DOS,OS/2,Windows CE 6.0, Windows 98, Windows XP Professional,
Windows Embedded standard (XPE) and Windows 2000 (SP4).
Please get the drivers from the Driver CD which attached with the standard packing of
VDX-6317RD-X board or please get it from DMP official website:
http://www.dmp.com.tw/tech/vortex86dx/
VDX-6317RD-X also supports most of the popular Linux distributions, for more detail information,
please visit DMP official website: http://www.dmp.com.tw/tech/vortex86dx/
Page 26
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
22
Appendix
A. F. TCP/IP library for DOS real mode
DSock is a TCP/IP library for DOS real mode, which is used by RSIP. It provides simple C
functions for programmer to write Internet applications. ICOP also provide Internet examples
using DSock: BOOTP/DHCP, FTP server, SMTP client/server, HTTP server, TELNET server,
Talk client/server, etc.
DSock provides a lot of example source code. Programmer can add Internet functions to their
project easily and save development time. With a utility "MakeROM”, programmer also can make
a ROM image to fit their application, those examples can be seen in the following Application
systems: Mity-Mite Serial Server, Web Camera Tiny Server and RSIP Serial Server.
DSock is free for All ICOP products using M6117D/Vortex86/Vortex86SX/Vortex86DX CPU and
ICOP also provide the business version of DSock for those customers who are using other x86
CPUs.
If you would like to use DSock or business version of DSock, Please mail to info@icop.com.tw or
contact your regional sales.
Please download the trial DSock software and Utilities from our website:
http://www.dmp.com.tw/tech/dmp-lib/dsock/
Page 27
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
23
B. BIOS Default setting
If the system cannot be booted after BIOS changes are made, Please follow below procedures in
order to restore the CMOS as default setting.
Press “End” Key, when the power on
Press <Del> to enter the AMI BIOS setup
Press “F9” to Load Optimized Defaults
Press “F10” to Save configuration changes and exit setup
Page 28
VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
24
Warranty
This product is warranted to be in good working order for a period of one year from the date of
purchase. Should this product fail to be in good working order at any time during this period, we
will, at our option, replace or repair it at no additional charge except as set forth in the following
terms. This warranty does not apply to products damaged by misuse, modifications, accident or
disaster. Vendor assumes no liability for any damages, lost profits, lost savings or any other
incidental or consequential damage resulting from the use, misuse of, originality to use this
product. Vendor will not be liable for any claim made by any other related party. Return
authorization must be obtained from the vendor before returned merchandise will be accepted.
Authorization can be obtained by calling or faxing the vendor and requesting a Return
Merchandise Authorization (RMA) number. Returned goods should always be accompanied by a
clear problem description.
Loading...