ICOP VDX2-6554 User Manual

VDX2-6554

DM&P Vortex86DX2 800MHz

PC/104 CPU Module

with 4S/2USB/VGA/LCD/LVDS/AUDIO/

LAN/GPIO/PWMx16

512MB/1GB DDR2 Onboard

User’s Manual

(Revision 1.4A)

The information in this manual is subject to change without notice for continuous improvement in the product. All rights are reserved. The manufacturer assumes no responsibility for any inaccuracies that may be contained in this document and makes no commitment to update or to keep current information contained in this manual.

No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part, in any form or by any means without the prior written permission of the ICOP Technology Inc.

December, 2013 Manual No. IUM6554000-01 Ver.1.3A July, 2014 Manual No. IUM6554000-01 Ver.1.4A January, 2015

Trademarks Acknowledgment

Vortex86DX2 is the registered trademark of DM&P Technology Inc.

Other brand names and product names that appear in this document are the properties and registered trademarks of their respective owners. All names mentioned herewith are served for identification purpose only.

T a b l e o f C o n t e n t s

T a b l e o f C o n t e n t s ............................................................. iii

C h a p t e r 1 Introduction……………………………………………1

1.1 Packing List ............................................................ 1

1.2 Ordering Information .............................................. 1

1.3 Product Description ................................................ 2

1.4 Specifications ......................................................... 3

1.5 Board Dimension .................................................... 5

C h a p t e r 2 Installation……………………………………………..6

2.1 Board Outline ......................................................... 6

2.2 Connectors Location ...................................... ........7

2.3 Connectors & Jumpers Summary ........................... 8

2.4 Pin Assignments & Jumper Settings ....................... 9

2.5 System Mapping ................................................... 17

2.6 Watchdog Timer ................................................... 21

2.7 GPIO .................................................................... 21

2.8 SPI flash ............................................................... 22

2.9 PWM .................................................................... 22

C h a p t e r 3 Driver Installation……………………………………23

Appendix ………………………………………………………………..24

A. TFT Flat Panel Data Output ...................................... 24

B. TFT Flat Panel Support List ....................................... 25

C. LVDS Flat Panel Support List .................................... 26

D. Flat Panel Wiring and Lighting .................................. 27

E. TCP/IP library for DOS real mode ............................. 28

F. BIOS Default Setting .................................................. 29

Warranty ............................................................................................ 30

This page is blank

VDX2-6554 Vortex86DX2 PC/104 CPU Module

C h a p t e r 1

Introduction

1.1 Packing List

Product Name Package

VDX2-6554

Embedded Vortex86DX2 CPU All-in-One Board

RS232 cable x 4

PRINTER cable x1

USB cable x 1 (U S B p o rt x 2)

VGA cable x 1

LAN cable x 1

GPIO cable x 1

AUDIO Line x2

PS/2 Mouse cable x 1

PS/2 Keyboard cable x 1

Screw Kit x 1

1.2 Ordering Information

 VDX2-6554-512 Vortex86DX2 CPU Module with 512MMB DDR2  VDX2-6554-1G Vortex86DX2 CPU Module with 1GB DDR2  VDX2-6554-512-T Vortex86DX2 CPU Module with 512MMB DDR2 and Touchscreen

support

 VDX2-6554-1G-T Vortex86DX2 CPU Module with 1GB DDR2 and Touchscreen support

VDX2-6554 Vortex86DX2 PC/104 CPU Module

1.3 Product Description

The VDX2-6554 family of low-power x86 embedded controller is designed to meet PC/104

specification, and integrated with the following features.

 800 MHz Vortex86DX2 SoC  VGA, TTL/ LVDS LCD support up to

1280x1024 resolution

 512MB/ 1GB DDR2 system memory  10/100Mbps Ethernet  2 USB 2.0 (host)  Up to 4 serial ports  Parallel port  16-bit GPIOs  Audio

 Onboard 4MB SPI Flash  Meet PC/104 stacking spec.  2 watchdog timer  PWM 16~24 channels  JTAG interface  AMI BIOS  Single voltage +5V DC  Support extended operating

temperature range of -20°C to +70°C

The VDX2-6554 PC/104 family of embedded controller is designed with backward compatibility

in mind, to provide migration path for projects facing end-of-life challenges with their existing x86

based PC/104 controller. The VDX2-6554 family of controller is designed as a plug in

replacement, with backward compatibility to support legacy software to help extend existing

product life cycle without heavy re-engineering.

VDX2-6554 is suitable for broad range of data-acquisition, Industrial automation, Process

control, Automotive controller, AVL, Intelligent Vehicle management device, Medical device,

Human machine interface, Robotics, machinery control and more…application that required s

mall footprint, low-power and low-cost hardware with open industry standard such as PC/104.

VDX2-6554 Vortex86DX2 PC/104 CPU Module

1.4 Specifications

Features VDX2-6554

CPU

DM&P SoC CPU Vortex8 6

DX2- 800MHz

Real T ime Clock w ith Lithium Battery B a ckup

Cache

L1:1 6K I-Cache, 1 6K D-Cache L2:256 KB Cache

BIOS

AMI BIOS

Bus Interface

PC/1 04 Standard Compli a n t

System Memory

512M B / 1 GB DDR2 Onb oard

Watchdog Timer

Software programmable from 30.5

to 512 se cond s x2

se ts(Watchdog 1 fully compatible with M6117D)

VGA

In teg rated

2D VGA chip

with dual display support (VGA + TT L /

VGA + LVDS) VGA: Maximum resolutio n up to 1280x1024 @ 60Hz LVDS : Maximum reso lution up to 1024x7 68 @ 60Hz Sin g le channel 18-b i t LVDS

LAN

In teg rated 10/100M Eth e rnet

AUDIO

ALC 262 (HD Audio)

Touch Controller

PS/2 interface (Optio n a l)

I /O Interface

SATA 7P Connector x 1 RS-2 32/485 port x4 Para l lel port x1 USB port x2 (U S B 2.0 version) USB hot SWAP x 1 (O p tional) 16-b it GPIO port x1 10/1 00Mbps Ethernet p o rt x1

Connectors

SA T A 7 P for SATA x 1

2.00 mm ∅ 44-pin box heade r for LCD x 1

2.00 mm ∅ 26-pin box heade r for Printe r x1

2.00 mm ∅ 20-pin box heade r for 16-bit G P IO x1

2.00 mm ∅ 16-pin header for LVDS x 1

2.00 mm ∅ 10-pin box heade r for VGA x1

2.00 mm ∅ 10-pin box heade r for USB x1

2.00 mm ∅ 10-pin box heade r for RS-232 x4

2.00 mm ∅ 8-pin header fo r Ethernet x 1

2.54 mm ∅ 5-pin box header for Keyboard x1

2.54 mm ∅ 5-pin header fo r Mouse x1

2.54 mm ∅ 4-pin header fo r DC-in x1

2.54 mm ∅ 2-pin header fo r Reset x1

1.25 mm ∅ 6-pin Wafer fo r JTAG x1

1.25 mm ∅ 4-pin Wafer fo r Line-out/MIC-in x2

1.25 mm ∅ 4-pin Wafer fo r Touch screen x1(Optional)

VDX2-6554 Vortex86DX2 PC/104 CPU Module

Flash Disk Support

Onbo a rd 4MB SPI Flash Disk (Dri ve r: A)

PWM

16 channels

Power Requirement

Sin g le Voltage +5V @9 00mA

Dimension

90 X 9 6mm (3.54 x 3 .7 7 inches)

Weight

100g

Operating Temperature

-2 0oC ~ +70oC

-4 0oC ~ +85oC (Optional)

Operating System Support

Fre e DOS, DOS 6.22, P CDOS 7.1, DR

DOS, x

DOS, OD/2, CE6.0,

CE7.0 , Windows XP Pro fessional, Win d ows Embedded Sta ndard (X P E ), POS Ready(WePOS), Embedded Linux, X-linux, Q N X , Vxw o rks and FreeBSD.

VDX2-6554 Vortex86DX2 PC/104 CPU Module

1.5 Board Dimension

VDX2-6554 Vortex86DX2 PC/104 CPU Module

C h a p t e r 2

Installation

2.1 Board Outline

Note:

1. COM RS232/485 is selected in BIOS setting.

. Touchscreen is optional. No onboard SPI ROM and PS/2

mouse

function if Touchscreen function is selected.

VDX2-6554 Vortex86DX2 PC/104 CPU Module

2.2 Connectors Location

Connectors

+ 23 hidden pages

ICOP VDX2-6554 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual