ICOP VDX2-6524 User Manual
VDX2-6524
DM&P Vortex86DX2 800MHz
Half-Size CPU Module
with 4S/4USB/VGA/LCD/LVDS/AUDIO/2LAN/GPIO
512MB/1GB DDR2 Onboard
User’s Manual
(Revision 1.3A)
Copyright
The information in this manual is subject to change without notice for continuous improvement in
the product. All rights are reserved. The manufacturer assumes no responsibility for any
inaccuracies that may be contained in this document and makes no commitment to update or to
keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part,
in any form or by any means without the prior written permission of the ICOP Technology Inc.
Copyright 2014 ICOP Technology Inc.
Manual No. IUM6524000-01 Ver.1.0A March, 2014
Manual No. IUM6524000-01 Ver.1.1A July, 2014
Manual No. IUM6524000-01 Ver.1.2A September, 2014
Manual No. IUM6524000-01 Ver.1.3A April, 2015
Trademarks Acknowledgment
Vortex86DX2 is the registered trademark of DM&P Electronics Inc.
Other brand names and product names that appear in this document are the
properties and registered trademarks of their respective owners. All names
mentioned herewith are served for identification purpose only.
T a b l e o f C o n t e n t s
T a b l e o f C o n t e n t s ............................................................. iii
C h a p t e r 1 Introduction……………………………………………1
1.1 Packing List ............................................................ 1
1.2 Ordering Information .............................................. 1
1.3 Product Description ................................................ 2
1.4 Specifications ......................................................... 3
1.5 Board Dimension .................................................... 5
C h a p t e r 2 Installation……………………………………………..6
2.1 Board Outline ......................................................... 6
2.2 Connectors Location ...................................... ........8
2.3 Connectors & Jumpers Summary ........................... 9
2.4 Pin Assignments & Jumper Settings ..................... 10
2.5 System Mapping ................................................... 18
2.6 Watchdog Timer ................................................... 22
2.7 GPIO .................................................................... 22
2.8 SPI Flash .............................................................. 23
2.9 PWM .................................................................... 23
C h a p t e r 3 Driver Installation……………………………………24
Appendix ………………………………………………………………..25
A. TFT Flat Panel Data Output ...................................... 25
B. TFT Flat Panel Support List ....................................... 26
C. LVDS Flat Panel Support List .................................... 27
D. Flat Panel Wiring and Lighting .................................. 28
E. TCP/IP Library for DOS Real Mode ........................... 29
F. BIOS Default Setting .................................................. 30
Warranty ............................................................................................ 31
This page is blank
Vortex86DX2-6524 Vortex86DX2 Half-Size CPU Module
1
C h a p t e r 1
Introduction
1.1 Packing List
Product Name Package
SOM304D2-6524
Vortex86DX2 base Board
RS232 cable x 3
PRINTER cable x1
USB cable x 2
LAN cable x 1
AUDIO Line x2
GPIO cable x1
Screw Kit x 1
SOM304D2 CPU
Module
Embedded Vortex86DX2 CPU All-in-One Board
1.2 Ordering Information
VDX2-6524-512 Vortex86DX2 CPU Module with 512MMB DDR2
VDX2-6524-1G Vortex86DX2 CPU Module with 1GB DDR2
VDX2-6524-CF-512 Vortex86DX2 CPU Module with 512MB DDR2 and CF Card slot
VDX2-6524-CF-1G Vortex86DX2 CPU Module with 1GB DDR2 and CF Card slot
Vortex86DX2-6524 Vortex86DX2 Half-Size CPU Module
2
1.3 Product Description
The VDX2-6524 family of low-power x86 embedded controller is designed to meet half-sized
specification, and integrated with the following features.
800 MHz Vortex86DX2 SoC
VGA, TFT/ LVDS LCD support up to
1280x1024 resolution
512MB/ 1 GB DDR2 system memory
10/100/1000 Mbps Ethernet
4 USB 2.0 (host)
Up to 4 serial ports
Parallel port
CF Card slot (Optional)
Audio
Onboard 4MB SPI Flash
Meet PC/104 stacking spec.
2 watchdog timer
PWM 16 channels
JTAG interface
AMI BIOS
Single voltage +5V DC
Support operating temperature range
of -10°C to +60°C
The VDX2-6524 half-size family of embedded controller is designed with backward compatibility
in mind, to provide migration path for projects facing end-of-life challenges with their existing x86
based half-size controller. The VDX2-6524 family of controller is designed as a plug in
replacement, with backward compatibility to support legacy software to help extend existing
product life cycle without heavy re-engineering.
VDX2-6524 is suitable for broad range of data-acquisition, industrial automation, process control,
automotive controller, AVL, intelligent vehicle management device, medical device, human
machine interface, robotics, machinery control and more.
Vortex86DX2-6524 Vortex86DX2 Half-Size CPU Module
3
1.4 Specifications
Features VDX2-6524
CPU
DM&P SoC CPU Vortex8 6
DX2- 800MH z
Real T ime Clock w ith Lithium Battery B a ckup
Cache
L1:1 6K I-Cache, 16K D-Cache L2:256KB Cache
BIOS
AMI BIOS
Bus Interface
PC/1 04 Standard Complia n t
System Memory
512M B / 1 GB DDR2 Onb oard
Watchdog Timer
Softwa re programm able from 30.5
us
to 512 seconds x2
se ts(Watchdog 1 fully compatible with M 6 117D)
VGA
In teg rated
2D VGA chip with dual display support (VGA + TTL /
VGA + LVDS)
VGA: Maximum resolutio n up to 1280x1024 @ 60 H z
LVDS : Maximum resolu tion up to 1024x768 @ 6 0 H z
Sin g le channel 24-b it LVDS
LAN
In teg rated 10/100M Eth ernet
x1
Realte k 8111F 10/100/1 000 Mbps Ethernet x1
AUDIO
ALC 262 (HD Audio)
Touch Controller
PS/2 interface (Opti o n a l)
I /O Interface
SA T A 7 P Connector x 1
RS -23 2 po rt x2
RS-2 32/485 port x2
Para l lel port x1
USB port x4 (USB 2 .0 version)
USB hot SWAP x 1 (O p tional)
16-b it GPIO port x1
10/1 00Mbps Ethernet p o rt x1
10/1 00/1000 Mbps E th e rne t port x1
Connectors
SA T A 7 P for SATA x 1
2.54 mm ∅ 26-pin header for Printer x1
2.54 mm ∅ 20-pin header for GPIO x1)
2.54 mm ∅ 10-pin header for USB x2
2.54 mm ∅ 10-pin header for RS-232 x3
2.54 mm ∅ 2-pin header fo r Reset x1
2.00 mm ∅ 44-pin box heade r for LCD x 1
2.00 mm ∅ 20-pin header for LVDS x 1
2.00 mm ∅ 8-pin header fo r Ethernet x 1
1.25 mm ∅ 4-pin Wafer fo r Line-out/MIC-in x2
1.25 mm ∅ 4-pin Wafer fo r Touch screen x1 (Optional)
Exte rnal RJ-45 connecto r for Ethernet x1
Exte rnal Mini DIN co n n ector for KBD/Mouse x1
Exte rnal D-Sub 15 pin fema l e connector for V G A x1
Exte rnal D-Sub 9 pin male co nnector for R S 23 2 x1
Vortex86DX2-6524 Vortex86DX2 Half-Size CPU Module
4
Flash Disk Support
Onbo a rd 4
MB SPI Flash Disk
Comp a ct Flash Type I/II (Optional)
Onbo a rd eMMC 512MB/4 G B (Optional)
PWM
16 cha nnels
Power Requirement
Sin g le Voltage +5V @1 A
Dimension
184 X 122mm (7.24 x 4 .80 inches)
Weight
180g
Operating
Temperature
-1 0oC ~ +60oC
-4 0oC ~ +85oC (Optional)
Operating System
Support
Fre e DOS,
MS-DOS,
DOS,
WIN CE6.0,
WIN
CE7.0 , Windows XP
Pro fessional, Windows E m bedded Standard (X PE), POS
Read y(WePOS), Embedd ed Linux, X-lin u x,
Vortex86DX2-6524 Vortex86DX2 Half-Size CPU Module
5
1.5 Board Dimension
Vortex86DX2-6524 Vortex86DX2 Half-Size CPU Module
6
C h a p t e r 2
Installation
2.1 Board Outline
LVDS
SATA DOM
Parallel Port
LCD
Connector
COM2 COM5 COM6 USB 3,4
COM1
LAN1
VGA
PS/2
KBD/Mouse
T/S Controller
(optional)
PC/104
Power Connector
LINE-OUT
MIC-IN
USB 1,2
LAN2
Reset
GPIO
SATA DOM power
Vortex86DX2-6524 Vortex86DX2 Half-Size CPU Module
7
VDX2-6524-CF
Note:
1. COM RS232/485 is selected by BIOS setting
2. Touchscreen is optional. No onboard SPI ROM and PS/2 mouse functions
if Touchscreen function is selected.
3. GPIO will be preoccupied when eMMC is selected on model VDX2-6524
4. CF Card slot is only available on model of VDX2-6524-CF
5. eMMC, LPT and GPIO are not available on model VDX2-6524-CF
Loading...