ICOP SOM304RD-P User Manual

SOM304RD-PI Development Kit
with 4S / 4 USB / LAN / 2GPIO / PWMx24
User’s Manual
(Revision 1.0A)
Copyright
The information in this manual is subject to change without notice for continuous improvement of the product. All rights are reserved. The manufacturer assumes no responsibility for any inaccuracy that may be contained in this document and makes no commitment to update or to keep current information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part, in any form or by any means without the prior written permission of the ICOP Technology Inc.
Copyright 2008 ICOP Technology Inc.
Manual No. IUMSOM304RD-PI000-01 Ver.1.0A September, 2012
Trademarks Acknowledgment
Vortex86DX is the registered trademark of DMP Electronics Inc.
Other brand names or product names appearing in this document are the properties and registered trademarks of their respective owners. All names mentioned herewith are reserved for identification purpose only.
T a b l e o f C o n t e n t s
T a b l e o f C o n t e n t s ............................................................. iii
C h a p t e r 1 Introduction……………………………………………1
1.1 Packing List ............................................................ 1
1.2 Product Description ................................................ 2
1.3 Specifications ......................................................... 3
1.4 Board Dimension .................................................... 5
C h a p t e r 2 Installation……………………………………………..8
2.1 Board Outline ......................................................... 8
2.2 Connectors & Jumpers Location ................... ........11
2.3 Connectors & Jumpers Summary ......................... 12
2.4 Pin Assignments & Jumper Settings ..................... 13
2.5 System Mapping ................................................... 25
2.6 Watchdog Timer ................................................... 30
2.7 GPIO .................................................................... 31
2.8 SPI flash ............................................................... 32
2.9 PWM .................................................................... 33
3.0 IDE to SD ............................................................. 34
C h a p t e r 3 Driver Installation……………………………………35
Appendix ………………………………………………………………..36
A. TCP/IP library for DOS real mode ............................. 36
B. SOM304RD-PI & SOMDX-DEV-PI Schematic .......... 37
C. BIOS Default Setting......................……………………38
Warranty ............................................................................................ 39
This page is blank
SOM304RD-PI Development Kit Vortex86DX SOM 304-Pin CPU Module
1
C h a p t e r 1
Introduction
1.1 Packing List
Product Name Package
SOM304DX-DEV-PI
SOM304DX-DEV-PI x 1
HDD 40P (2.54mm ) x 1
HDD 44P (2.0mm) x 1
RS232 cable (2.54mm) x 5
GPIO cable (2.54mm) x 2
USB (2.54mm) x 1
Print cable (2.54mm ) x 1
Product Name Package
SOM304RD-PI
SOM304RD-PI CPU Module x 1
Product Name Package
PCI-VGA-Z9s
XGI Z9s VGA/DVI PCI Display Board x 1
SOM304RD-PI Development Kit Vortex86DX SOM 304-Pin CPU Module
2
1.2 Product Description
The System on Module is a core module with the processor, memory and I/O that would contain
the following benefits in the respect of system design.
800MHz Vortex86DX System-On-Chip 256 / 512MB DDR2 system memory 4 USB Ver. 2.0 (host) 4 serial ports 16-bit GPIO x2 ISA bus PCI bus 2 watchdog timer
Enhanced IDE (UltraDMA-100/66/33) JTAG interface PWM 24~32 channels AMI BIOS 4MB SPI flash Single voltage +5V DC Support extended operating
temperature range from -20°C to +70°
SOM304RD-PI is suitable for broad range of data-acquisition, Industrial automation,
Process control, Automotive controller, AVL, Intelligent Vehicle management device,
Medical device, Human machine interface, Robotics and machinery control.
SOM304RD-PI measured at only 70mm (L)*70mm (W)*10.5mm (H), is designed
particularly as the kernel for the diverse expandable applications. Through 8 rows of
38pin connector, SOM304RD-PI is able to provide multiple functions, such as ISA BUS,
RS-232, IDE, LAN, USB and GPIO.
To assist users easily adapt SOM304RD-PI Module into their applications, ICOP offers a
complete development board and referential circuit diagram for SOM304RD-PI Module in
order to reduce users’ time.
Please visit the website below for further information
http://www.dmp.com.tw/tech/vortex86dx/
As to the referential circuit drawing, please contact info@icop.com.tw
SOM304RD-PI Development Kit Vortex86DX SOM 304-Pin CPU Module
3
1.3 Specifications
SOM304RD-DEV-PI
Features SOM304DX-DEV-PI
Bus Interface
PCI, ISA bus standard compliant
Connectors
1.27mm 76-pin header for signal x4
2.54mm 40-pin header for IDE x1
2.54mm 26-pin header for Printer x1
2.54mm 20-pin header for GPIO x2
2.54mm 10-pin header for USB x1
2.54mm 10-pin header for RS-232 x5
2.0mm 44-pin header for IDE x1 98-pin slot for ISA x1 120-pin slot for PCI x2 104-pin box header for PC/104 x1 External RJ-45 connector for Ethernet x1 External USB connector x2 External 9-pin D-Sub male connector for RS-232 x2 External 6-pin Mini DIN connector for Keyboard x1 External 6-pin Mini DIN connector for Mouse x1 External Audio Phone Jack x1
Power Requirement
Single Voltage +5V
@
100mA
Dimension
170 X 170 mm (6.69 x 6.69 inches)
Weight
280g
Operating Temperature
-20oC ~ +70oC
-40°C ~ +85°C (Optional)
SOM304RD-PI Development Kit Vortex86DX SOM 304-Pin CPU Module
4
SOM304RD-PI
Features SOM304RD-PI
CPU
DM&P SoC CPU Vortex86DX- 800MHz Real Time Clock with Lithium Battery Backup
Cache
L1:16K I-Cache, 16K D-Cache L2 Cache 256KB
BIOS
AMI BIOS
Bus Interface
PCI, ISA bus standard compliant
System Memory
256 / 512MB DDR2 onboard
Watchdog Timer
Software programmable from 30.5 us to 512 seconds x2 sets(Watchdog 1 fully compatible with M6117D)
LAN
Integrated 10/100Mbps Ethernet
Flash Disk Support
Onboard 4MB SPI Flash Disk Onboard SST Flash Disk (512MB/1GB/2GB/4GB are optional) MSTI EmbedDisk Module (16MB and above) 44-pin IDE to Micro SD (Optional)
PWM
24~32 Channels
I2C
Controlled by GP 34/35
Serial Console
Controlled by GP 36/37
I /O Interface
Enhanced IDE port (UltraDMA-100/66/33) x1 RS-232 port x4 USB port (Ver2.0) x4 Parallel port x1 16-bit GPIO port x2
10/100Mbps Ethernet port x1
Connectors
1.27mm 76-pin box header for signal x4
1.25mm 6-pin Wafer for JTAG x1
Power Requirement
Single Voltage +5V
@
480mA
Dimension
70 mm (L) x 70 mm (W) x 10.5 mm (H) (With Cover)
Weight
25g
Operating Temperature
-20oC ~ +70oC
-40°C ~ +85°C (Optional)
SOM304RD-PI Development Kit Vortex86DX SOM 304-Pin CPU Module
5
1.4 Board Dimension
SOM304DX-DEV-PI
SOM304RD-PI Development Kit Vortex86DX SOM 304-Pin CPU Module
6
SOM304RD-PI
SOM304RD-PI Development Kit Vortex86DX SOM 304-Pin CPU Module
7
SOM304RD-PI Development Kit Vortex86DX SOM 304-Pin CPU Module
8
C h a p t e r 2
Installation
2.1 Board Outline
SOM304DX-DEV-PI
Console Redirection
GPIO 0, 1
GPIO 2, 3
ISA Bus
PC/104 Bus
ATX Power Input
PWR - SW
PS/2 KB/Mouse
COM1 COM2
COM1
LAN USB
COM2
Audio
USB 0, 1
Reset
PCI Slot
COM4
Parallel Port
LPC
COM9
EIDE
Interface
IDE/SD
Power
Connector
COM3
SOM304RD-PI Development Kit Vortex86DX SOM 304-Pin CPU Module
9
SOM304DX-DEV-PI with PCI-VGA-Z9s
PCI-VGA-Z9s
Board
DVI
VGA
PS/2 Mouse
PS/2 KBD
COM1
COM2
USB
LAN
MIC-IN
LINE-OUT
LINE-IN
Loading...
+ 30 hidden pages