ICOP PEX-090T-8A, PEX-090T-5A, PDX3-090T-5A, PDX3-090T-8A, PDX3-090T-5A-2G User Manual

i

DM&P Vortex86EX Panel
PC w ith 9” TFT LCD

 Model:

PEX-090T-5A / PEX-090T-8A

User’s Manual

(Revision 1.1A)

i

Revision

Date Version Description

2016/11/18 Version 1.0 Initial Release

2017/01/10 Version 1.1 Specification correction

ii

PEX-090T DM&P Vortex86EX Panel PC with 9” WSVGA TFT LCD

Copyright

The information in this manual is subject to change without notice for
continuous improvement in the product. All rights are reserved. The manufacturer
assumes no responsibility for any inaccuracies that may be contained in this
document. And makes no commitment to update or to keep current the
information contained in this manual.

No part of this manual may be reproduced, copied, translated or transmitted,
in whole or in part, in any form or by any means without the prior written
permission of the ICOP Technology Inc.

Copyright 2017 ICOP Technology Inc.

Manual No. IUMPEX090-01 Ver.1.1A Jan, 2017

Trademarks Acknowledgment

Vortex86EX is the registered trademark of DMP Electronics Inc. Other brand
names or product names appearing in this document are the properties and
registered trademarks of their respective owners. All names mentioned herewith
are served for identification purpose only.

Safety Information

 Read these Safety instructions carefully.
 Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

 Do not expose your Panel PC to rain or moisture, in order to prevent shock

and fire hazard.

 Keep PEX-090T away from humidity.
 Do not open the cabinet to avoid electrical shock. Refer to your nearest

dealer for qualified personnel servicing.

 Never touch un-insulated terminals or wire unless your power adaptor is

disconnected.

 Locate your Panel PC as close as possible to the socket outline for easy access

and to avoid force caused by entangling of your arms with surrounding cables
from the Panel PC.

 USB connectors are not supplied with Limited Power Sources.
 If the equipment is not used for a long time, disconnect it from the power

source to avoid damage by transient overvoltage.

DO NOT ATTEMPT TO OPEN OR TO DISASSEMBLE THE CHASSIS (ENCASING) OF THIS

PRODUCT. PLEASE CONTACT YOUR DEALER FOR SERVICING FROM QUALIFIED TECHNICIAN.

iii

PEX-090T DM&P Vortex86EX Panel PC with 9” WSVGA TFT LCD

Table of Contents

Table of Contents ............................................................................................. iii

1 .General Information ............................................................................. 1

1.1 Product Description ............................................................ 1

1.2 Product Specification ......................................................... 2

1.3 Inspection standard for TFT-LCD Panel .............................. 4

1.4 Product Dimension ............................................................. 7

1.5 Panel Mounting Instruction ................................................ 8

1.6 Ordering Information ....................................................... 10

1.7 Packing List ....................................................................... 10

2 .System Installation ............................................................................. 11

2.1 CPU Board Outline ............................................................ 11

2.2 Connector Summary......................................................... 12

2.3 Connector Pin Assignments .............................................. 13

2.4 External I/O Overview ...................................................... 15

2.5 External I/O Pin Assignment ............................................. 16

2.6 System Mapping ............................................................... 18

2.7 Watchdog Timer ............................................................... 21

3 .Driver Installation ............................................................................... 22

3.1 PEX-090T Development Note ........................................... 23

Warranty ......................................................................................................... 24

1

PEX-090T DM&P Vortex86EX Panel PC with 9” WSVGA TFT LCD

1 .G eneral Informat ion

1.1 Product Description

PEX-090T is an ultra-compact platform for the present demanding embedded

and productive applications. It has new Vortex86EX SoC CPU which consumes only

minimum power requirement when running at 400MHz, and DDR3 memory

provides faster data transfer rate. By using 9” TFT LCD, PEX-090T becomes the

perfect choice for a limited budget. In additional, the integrated 10/100M

Ethernet port supplies the communication capability which makes PEX-090T can

be more widely used when running with DOS, Linux, Windows CE, Windows

Embedded environments to become the perfect solution for system integration.

2

PEX-090T DM&P Vortex86EX Panel PC with 9” WSVGA TFT LCD

1.2 Product Specification

Table 1-1 Product Specification

CPU Board Specifications

CPU DM&P Vortex86EX - 400MHz

Cache

L1:16KB I-Cache, 16KB D-Cache

L2: 128KB Cache

BIOS Coreboot BIOS

Memory 1GB DDR3 onboard

Watchdog Timer

Software programmable from

30.5u to 512 seconds x 2 sets

LAN Integrated 10/100M Ethernet

Audio HD Audio-Realtek ALC262 CODEC

Internal Drives Micro SD slot

I/O

RS-232/422/485 x 1

USB ports (Ver2.0) x 2

RJ-45 Port x 1

Mechanical & Environment

Power Requirement

Single Voltage +5VDC ( 5A )

Multi Voltage +8~+35VDC ( 8A )

Power Consumption 10 Watt

Operating

Temperature

-20~+60℃ ( -22 ~ +140℉)

Storage Temp .

-30 ~ +70℃ ( 14 ~ +158℉)

Operating Humidity 0% ~ 90% relative humidity, non-condensing

Dimensions 236.6 x 146 x 35mm (9.31 x 5.75 x 1.38 inches)

3

PEX-090T DM&P Vortex86EX Panel PC with 9” WSVGA TFT LCD

Weight 760g

Front Panel

Protection

IP 65

Certification CE / FCC / VCCI / Vibration / Shock

LCD Specifications

Display Type 9” TFT LCD

Backlight Unit LED

Display Resolution 1024(W) x 600(H)

Brightness (cd/m2) 300 nits

Contrast Ratio 500 : 1

Display Color 262, 144

Pixel Pitch (mm) 190.5 (H) x 189 (V)

Viewing Angle

Vertical 120o,

Horizontal 140

o

Backlight Lifetime 18,000 hrs

Touchscreen

Type Analog Resistive

Resolution Continuous

Transmittance 80%

Controller PS / 2 interface

Software Driver Linux, Win CE

Durability 1 million

4

PEX-090T DM&P Vortex86EX Panel PC with 9” WSVGA TFT LCD

1.3 Inspection standard for TFT-LCD Panel

Table 1-2 Inspection Standard

DEFECT TYPE LIMIT Note

VISUAL
DEFECT

INTER

NAL

SPOT

φ＜0.15mm

Ignore

Note1

0.15mm≦φ≦0.5mm N≦4

0.5mm＜φ

N=0

FIBER

0.03mm<W≦0.1mm, L≦

5mm

N≦3

Note1

1.0mm＜W, 1.5mm＜L

N=0

POLARIZER

BUBBLE

φ＜0.15mm

Ignore

Note1

0.15mm≦φ≦0.5mm N≦2

0.5mm＜φ

N=0

Mura It’ OK if mura is slight visible through 6%ND filter

ELECTRICAL

DEFECT

BRIGHT DOT

A Grade B Grade

C

Area O Area

Total

C

Area O Area

Total

Note3

N≦0 N≦2 N≦2 N≦2 N≦3 N≦5

Note2

DARK DOT

N≦2 N≦3 N≦3 N≦3 N≦5 N≦8

TOTAL DOT

N≦4 N≦5 N≦6 N≦8

Note2

TWO ADJACENT DOT

N≦0

N≦1

pair

N≦1

pair

N≦1

pair

N≦1

pair

N≦1

pair

Note4

THREE OR MORE

ADJACENT DOT

NOT ALLOWED

LINE DEFECT NOT ALLOWED

(1) One pixel consists of 3 sub-pixels, including R, G, and B dot.

(Sub-pixel = Dot)

(2) LITTLE BRIGHT DOT ACCEPTITABLE UNDER 6 % ND-Filter

(3) If require G0 grand (Total dot N≦0), please contact region sales.

5

PEX-090T DM&P Vortex86EX Panel PC with 9” WSVGA TFT LCD

[Note 1] W : Width[mm], L : Length[mm], N : Number, φ: Average Diameter.

1. White / Black Spot

2. Polarizer Bubble

Fig 1-1

Fig 1-2

[Note 2] Bright dot is defined through 6% transmission ND Filter as following.

Fig 1-3