ICOP ICOP-6036E, ICOP-6036VE User Manual

ICOP-6036VE/6036E

Embedded 5x86 3.5"-size All-in-One CPU

Board Series

User’s Manual

(Version 3.3)

ii

Copyright Notice

This document is copyrighted, 2000 by ICOP Technology Inc.
All rights are reserved. The information in the manual is
subject to change without notice in order to improving products.

No part of this manual may be reproduced, copied, translated
or transmitted in any form or by any means without the prior
written permission of the manufacturer.

ICOP Technology Inc. assumes no responsibility for any
inaccuracies that may be contained in this document. ICOP
Technology Inc. makes no commitment to update or to keep
current the information contained in this manual.

Copyright 2000 by ICOP Technology Inc.
All rights reserved. Ver.2.1 2000,
Printed in Taiwan

Trademarks Acknowledgments

All brand names and trademarks are the properties and
registered brands of their respective owners.

iii

T a b l e o f C o n t e n t s

C h a p t e r 0 Startup

0.1 Packing List .............................................................. 1

0.2 Specifications ........................................................... 2

0.3 Component Location ................................................. 3

C h a p t e r 1 Introduction

1.1 Features .................................................................... 4

1.2 Specifications ........................................................... 5

1.3 VGA Interface ............................................................ 7

1.4 DiskOnChip 2000 Flash Disk ..................................... 9

1.5 Network Interface .....................................................10

C h a p t e r 2 Installation

2.1 Jumper Settings .......................................................11

2.1.1 ICOP-6036VE ............................................................. 12

2.1.2 ICOP-6036E ............................................................... 13

2.2 Connectors ...............................................................15

2.2.1 ICOP-6036VE ............................................................. 15

2.2.2 ICOP-6036E ............................................................... 15

2.3 DiskOnChip/Flash ROM Disk....................................17

2.3.1 Setup a DiskOnChip ® 2000 Flash Disk ..................... 17

2.3.2 Setting up a Flash Disk.............................................. 18

2.4 Watchdog Timer .......................................................19

2.5 General Purpose I/O .................................................23

C h a p t e r 3 SVGA Setup

3.1 Introduction..............................................................25

3.1.1 Chipset ...................................................................... 25

3.1.2 Display memory ........................................................ 25

3.2 Installation of SVGA driver ......................................25

3.2.1 Installation for Windows 3.1 ..................................... 27

3.2.2 Installation for Windows 95/98 ................................. 29

C h a p t e r 4 Network Interface

iv

4.1

Introduction..............................................................31

4.2 Software Support .....................................................32

Appendix Pin Assignments

IDE Interface Connector................................................... 34

VGA/Flat Panel Connectors ............................................. 35

Floppy Disk Connector ...................................................... 37

Parallel Port Interface ....................................................... 38

Serial Port Interface........................................................... 39

Keyboard and PS/2 Mouse Connector ............................ 40

PC/104 Connectors ........................................................... 41

Warranty

ICOP Embedded 5x86 3.5"-size AIO CPU Board User's Manual 1

C h a p t e r 0

Startup

0.1 Packing List

Product Name

Function Package

ICOP-6036E

Embedded 5x86

3.5"-size All-in­One CPU Board



ICOP-6036E Embedded 5x86 3.5"-size
All-in-One CPU Board



Utility and Drivers Diskette x 2



FDD cable x 1



HDD cable x 1



RS232 cable x 4



Printer cable with bracket x 1



AT KB / PS2 Mouse Y-cable x 1

ICOP-6036VE

Embedded 5x86

3.5"-size All-in­One CPU Board
with VGA/LCD



ICOP-6036VE Embedded 5x86 3.5"­size All-in-One CPU Board



Utility and Drivers Diskette x 2



FDD cable x 1



HDD cable x 1



RS232 cable x 4



Printer cable with bracket x 1



AT KB / PS2 Mouse Y-cable x 1



VGA cable x 1

2 ICOP Embedded 5x86 3.5"-size AIO CPU Board User's Manual

0.2 Specifications

Features ICOP-6036E ICOP-6036VE

Chipset

SGS STPC Client, 66/75 MHz

Processor

5x86 CPU on-die

Multi I/O Chip

Winbond W83977F-A, ALi 5113

BIOS

AMI BIOS

Watchdog Timer

From 1 to 64 seconds

Bus Interface

PC/104 standard compliant

Memory

8MB onboard, up to 16MB onboard

Memory Sockets

1

DiskOnChip Socket

1

VGA Chipset

STPC Client C&T 69000 (2MB)

Display

CRT VGA/LCD

Enhanced IDE Port

1

Floppy Connector

1

Network Chipset

Realtek 8139AS

Network Interface

RJ-45

Serial Port

RS232 X 4 (or RS232 X 3,RS485 X 1)

Parallel Port

1

Power Requirement

+5V @1.6A

Board Weight

300g

Board Size

102mm X 144 mm

Operating Temperature

-20 ~ +60°C

ICOP Embedded 5x86 3.5"-size AIO CPU Board User's Manual 3

0.3 Component Location

ICOP-6036/6036VE

PS/2
Keyb.

Ethernet
RJ-45

COM4/3/2/1

RS-485

+5V

GND

P8 Power Cont.

EIDE
Port

FDD
Port

Flat Panel

CRT
SVGA

Parallel Port

Keyb.
Cont.

4 ICOP Embedded 5x86 3.5"-size AIO CPU Board User's Manual

C h a p t e r 1

Introduction

1.1 Features



3.5’’-size (144x102 mm) Embedded CPU Module



PC/104 connector



SGS STPC Client 5x86 processor with FPU unit



CRT and Flat Panel Display interface



8MB EDO RAM onboard and up to 16MB by expansion



Enhanced IDE devices and FDD interface



One Bi-directional Parallel Port



RS-232/485 interface



Watchdog timer



Socket for Flash or DiskOnChip



Onboard Keyboard, Mouse connector



Onboard Ethernet, compatible with NE2000



Single voltage +5 V power connector



Operating temperature from –20 • +60•



Flexible OEM/ODM design

ICOP Embedded 5x86 3.5"-size AIO CPU Board User's Manual 5

1.2 Specifications

Chipset: SGS ST PC Client, 66/75MHz, 64-bit internal architecture

x86 processor with FPU unit

Enhanced IDE, Scatter/gather and Multi-word DMA

Data Bus: 16-bit

Bus Speeds: ISA - 8.3 MHz, PC/104 - 8.3 MHz

DMA Channels: 7

Interrupt Levels: 15

Watchdog Timer: from 0.5 to 32 seconds

Real-Time clock

BIOS: AMI BIOS

RAM: 8 MB up to 16 MB of EDO DRAM

I/O: Winbond W83977F-A, ALi 5113

two floppy drives

two hard drives or Enhanced IDE devices

three RS-232 port, one RS-232/485 port

Bi-directional Parallel Port

Bus Interface: PC/104

Connector:

External 9-pin D-Type male RS232 connector

External 15-pin D-Type female VGA connector

External 6-pin Mini DIN for AT-keyboard, PS2 Mouse

10-pin box header for RS232 port X 4

25-pin box header for parallel port

5-pin header for AT-keyboard

50-pin box header for flat panel VGA

2-pin header for RS485 port

6 ICOP Embedded 5x86 3.5"-size AIO CPU Board User's Manual

34-pin box header for floppy disk drive

40-pin box header for enhanced IDE

6-pin P8 power connector

One socket for flash ROM or DiskOnChip

RJ-45 connector for 10/100BASE-T

Display:

(ICOP-6036VE)

• Chipset: C&T CHIPS 69000

• Memory: 2MB integrated memory

• Display: resolution up to 1024x768 @ high colors

• Compatibility: VGA, TFT, DSTN, SSTN, EL, Plasma hardware

• OS Support: DOS, Windows, Windows 95/98, Windows NT, Windows CE,
QNX, OS/2

(ICOP-6036E)

• Chipset: built-in ST PC Client

• Memory: 256 KB ~ 1 MB shared with system memory

• Display: CRT resolution up to 1024x768

• Compatibility: VGA hardware

• OS Support: DOS, Windows, Windows 95, Windows NT, Windows CE,
QNX, OS/2

LAN: Realtek 8139BL single chip

NE2000 compatible with built in 16 KB RAM buffer

Throughput : 10/100 Mbps

Power Requirements: single voltage +5 V @ 1.6 A

Dimensions: 102 (L) x 144 (W) mm.

Weight: 300g

Operating Temperature: -20~+60 °C

ICOP Embedded 5x86 3.5"-size AIO CPU Board User's Manual 7

1.3 VGA Interface

(ICOP-6036E)

The STPC integrates a full VGA Controller with Extended Functions together
with an output Color Digital to Analog (RAMDAC) and a Graphics Engine.
The VGA Controller provides the basic video display function. It generates
the timing and logic required to create an output data streamfrom the video
buffer and the appropriate horizontal and vertical synchronisation pulses.
The Frame video buffer exists in the main DRAM memory in the first 1M of
the memory space. This Frame buffer area is selected upon configuration of
the VGA video output and, once selected thefunction of the Frame buffer
area can not be changed back to normal DRAM memory program/data
functions until the next reset cycle.

Resolutions of up to 1024x768 and color depths of 8, 16, 24 and 32 bits per
pixel are supported. The integrated RAMDAC supports digital to analog
conversion rates of up to 135 MHz. This along with the peak video
bandwidth of 320 MBytes/sec (using EDO DRAMs) enable the VGA
Controller to support 1024x768x24 and 800x600x32 resolutions at 75 Hz
refresh rate. To support vertical resolutions up to 1024 pixels, vertical timing
parameters have been extended from 10 to 11 bits. The VGA defined
horizontal timing parameters are compatible with the above resolutions. The
horizontal and vertical timing counters and the sync and blank generation
logic operate synchronously to DCLK which can be up to 135MHz in
frequency.

The on-chip triple RAMDAC runs at up to 135MHz, using and external
frequency synthesizer, allowing a display up to 1024x768 at 75Hz. Color is
handled using 8-, 16-, 24- or 32-bits per pixel. VDU Graphics standards can
be read through the on-chip Display Data Channel (DDC) link.

The Graphics Engine provides a high performance 64-bit windows accelera­tor. It is completely backward compatible with the VGA and SVGA standards.
Hardware acceleration is provided for BITBLTs, transparent BLTs and fills
and text (generalised bit map expansion).

The Graphics Core is capable of using up to 1MB of available
memory as its frame buffer. The Cathode Ray Tube Controller (CRTC)
Start Address uses 20-bits to allow locating the frame buffer at any
double word boundary within this 4Mb of memory.

(ICOP-6036VE)

The 69000 accelerator extends CHIPS's HiQVideo™ Series of mobile
graphics/video accelerated controllers by embedding 2 MBytes of

8 ICOP Embedded 5x86 3.5"-size AIO CPU Board User's Manual

high speed SDRAM into the chip.

The 69000 is the first member of the HiQVideo family to integrate
high speed SDRAM frame buffer memory into the chip. Using leading
edge embedded memory logic technologies, the 69000 integrates 2
MBytes of SDRAM into the chip. By embedding SDRAM and graphics
controller logic on the same die, the 69000 delivers uncompromised
performance and at the same time consumes much less power than
the discrete solution. The integrated SDRAM supports up to 83MHz
operation, which provides up to 664MBytes/second frame buffer
bandwidth. The increase in the frame buffer bandwidth enables the
69000 to support high color, high-resolution graphics modes and real­time video acceleration.

The 69000 is a highly integrated graphics/flat panel controller for
notebooks, mini-notebook, industrial PC, and palmtop applications.
By integrating 2MByte of SDRAM, graphics, flat panel, and CRT
control logic on the same die, 69000 delivers superb 2D video
performance, consumes minimal power and at the same time reduces
the PCB real estate for the graphics subsystem. The 2MByte
embedded SDRAM is arranged in a 64-bit configuration. The 69000
supports both Frame AGP and PCI bus which enables a wide range
of system platforms.

ICOP Embedded 5x86 3.5"-size AIO CPU Board User's Manual 9

1.4 DiskOnChip 2000 Flash Disk

Flash Disk DiskOnChip ® 2000

•

Package:

Single Chip FlashDisk in 32-pin DIP JEDEC

•

Capacity:

1-144 MByte capacity

• Data Reliability: ECC/EDC error correction

• Memory Window: 8 Kbyte

10 ICOP Embedded 5x86 3.5"-size AIO CPU Board User's Manual

1.5 Network Interface

•

Chipset:

Realtek 8139BL single chip

•

Type:

10/100BASE-T

•

Connectors:

onboard RJ-45 connectors

•

Monitoring LEDs:

network ready indicator, network activity indicator

•

Compatibility:

NE2000

ICOP Embedded 5x86 3.5"-size AIO CPU Board User's Manual 11

C h a p t e r 2

Installation

2.1 Jumper Settings

ICOP-6036/6036VE

KB1
J1

RJ45

CONT9/8/6/COM1

CONT5

J6

CONT10

CONT4

IDE1

J5

CONT7

CONT1

P1

J2

J3

JP1

JP3

JP2

JP7/JP6

JP8