Page 1
User Manual
A
PL-PITX-N3350-N
A Pico-ITX embedded solution on
Intel® Dual-core processor
(Apollo Lake Family)
Version 1.0
Page 2
APL-PITX-N3350 User Manual
Copyright
The information in this manual is subject to change without notice for continues
improvement in the product. All rights are reserved. The manufacturer assumes no reasonability
for any inaccuracies that may be contained in this document and makes no commitment to
update or to keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in
part, in any form or by any means without the prior to written permission of ICOP Technology
Inc.
Copyright ⓒ 2019 ICOP Technology Inc
Trademarks Acknowledgement
Intel® is the registered trademark of Intel Semiconductor Manufacturing Company. Other
brand names and product names that appear in this document are the properties and registered
trademarks of their respective owners. All names mentioned herewith are served for
identification purpose only.
ICOP Technology Inc. I
Page 3
APL-PITX-N3350 User Manual
Revision History
R
evision
1.0 May 1st, 2022 First version release
Date R
emark
ICOP Technology Inc. II
Page 4
APL-PITX-N3350 User Manual
Contents
1 General Information ........................................................................................... 1
1.1 Overview ....................................................................................................................................... 1
1.2 Block diagram ................................................................................................................................ 1
1.3 Specifications ................................................................................................................................. 2
1.4 Ordering Information .................................................................................................................... 3
1.4.1 APL-PITX-N3350 ................................................................................................................... 3
2 Hardware Information ....................................................................................... 4
2.1 Board Outline ................................................................................................................................ 4
2.2 Connector, Header, and Jumper Summary ..................................................................................... 5
2.3 Pin Assignments & Jumper Settings ............................................................................................... 6
3 Technical Support Directly from ICOP ....................................................... 21
User Manual Feedback ............................................................................................. 21
Warranty ...................................................................................................................... 22
ICOP Technology Inc. III
Page 5
APL-PITX-N3350 User Manual
1 General Information
1.1 Overview
APL-PITX-N3350, a standard Pico-ITX embedded solution for industrial application based
on Intel® Apollo Lake Dual-Core CPU with DDR3L RAM support up to 8GB, provides stable
and powerful computing performance.
APL-PITX-N3350 supports Gigabit LAN, 2x COM, 4x USB, SMBus, 8-bit GPIO, SIM
card holder, MiniPCIe, HDMI, LVDS and 2 storage options SATA interface and M.2 SATA
interface for development use.
1.2 Block diagram
ICOP Technology Inc. 1
Page 6
wafer for SATA power output x1
M.2 slot (M key 2242) for M.2 SATA x1
APL-PITX-N3350 User Manual
1.3 Specifications
Processor Intel® Apollo Lake N3350 2.40GHz (Brust) 1.10GHz Dual Core
System memory DDR3L 1866MHz memory support up to 8GB in SO-DIMM slot x1
BIOS AMI BIOS
Display Intel® HD Graphics with MultiDisplay support
HDMI: resolution support up to 3840 x 2160 at 60Hz
LVDS: resolution support up to 1920 x 1080 at 60Hz
Audio Realtek ALC662VD/ALC888S HD Audio (Default)
LAN Realtek 8111H Gigabit Ethernet Controller
Expansion MiniPCIe (full-size) x1
Disk Support M.2 SATA x1 SATA interface x1
I/O Interface 8-bit GPIO x1
SIM card holder x1
Connectors 2-pin header for Buzzer x1
4-pin
9-pin header for USB2.0 x1
9-pin header for COM x2
30-pin wafer for LVDS x1
RJ45 connector x1
USB connector for USB3.0 x2
Power
12VDC ATX power input with ATX/AT mode
Requirement
Operating Temp. 0°C to 60°C
Dimensions 100 x 72 mm
O/S Support Windows 10 Linux
COM x2 (RS232/422/485 x1)
USB (ver. 3.0) x2
4-pin header for SMBus x1
7-pin SATA connector for SATA x1
9-pin header for Line-in, Line-out, and MIC-in x1
10-pin header for GPIO x1
HMDI connector x1
Power jack for 12VDC input x1
SIM card holder x1
SMBus x1
USB (ver. 2.0) x2
ICOP Technology Inc. 2
Page 7
APL-PITX-N3350 User Manual
1.4 Ordering Information
1.4.1 APL-PITX-N3350
Product Name APL-PITX-N3350
Processor
System
Memory
Expansion MiniPCIe (full size) x1
Disk Support M.2 SATA, SATA device
Display HDMI, LVDS
Audio Line-in, Line-out, MIC-in
GigaLAN 1
COM
USB3.0 2
USB2.0 2
SMBus 1
8-bit GPIO 1
SIM Card Holder Support
DDR3L 1866MHz memory support up to 8GB
Intel® Apollo Lake N3350
2.40GHz (Burst) 1.10GHz Dual Core
in SO-DIMM socket x1
2
(1x RS232/422/485)
ICOP Technology Inc. 3
Page 8
APL-PITX-N3350 User Manual
2 Hardware Information
2.1 Board Outline
ICOP Technology Inc. 4
Page 9
APL-PITX-N3350 User Manual
2.2 Connector, Header, and Jumper Summary
Nbr. Name Description Nbr of Pin
JP1 Voltage Select for LVDS voltage LVDS voltage setting 4
JP2 AT Mode Function Select AT Mode Function Select Function 3
JP3 Clear CMOS and RTC Clear CMOS and RTC 6
JP4 Function Select for Pin 9 on COM1 Function setting for Pin9 of COM1 4
--- SATA Connector 7-pin connector for SATA Device 7
--- SATA Power-out Connector 4-pin connector for SATA Power out 4
--- Battery Connector Connector for RTC battery 2
--- LVDS Inverter LVDS inverter connector 8
--- GPIO Header GPIO Port Header 10
--- Audio Header Pin header for Line-out & MIC-in 9
--- COM1 Header Pin Header for COM1 9
--- COM2 Header Pin Header for COM2 9
PWR_RST
Power Button, Reset Button, Power
LED, and Hard Disk LED Header
--- USB2.0 Header Pin Header for USB2.0 Device 9
--- SMBus Header Pin Header for SMBus 4
--- Buzzer Pin Header for Buzzer 2
--- LVDS Header Pin Header for LVDS Display 30
Header for Power Button, Reset Button,
Power LED, and Hard Disk LED
8
ICOP Technology Inc. 5
Page 10
APL-PITX-N3350 User Manual
2.3 Pin Assignments & Jumper Settings
JP1: Voltage Select for LVDS voltage
Pin Status Assignment
2 – 4 Closed 3.3V
3 – 4 Closed 5V
4 – 6 Closed 12V
JP2: AT Mode Function Select
Pin Status Assignment
1 – 2 Closed ATX Mode
2 – 3 Closed AT Mode
JP3: Clear CMOS and RTC
Pin Status Assignment
1 – 2 Closed Clear CMOS(One Touch)
3 – 4 Closed Reset RTC
Disabled Security Measures in
5 – 6 Closed
the Flash Descriptor
(Override)
ICOP Technology Inc. 6
Page 11
APL-PITX-N3350 User Manual
JP4: Function Select for Pin 9 on COM1
Pin Status Assignment
2 – 4 Closed RS232
3 – 4 Closed 5V
4 – 6 Closed 12V
SATA Connector
Pin Assignment
1. GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
SATA Power-out Connector
Pin Assignment
1. +5V
2 GND
3 GND
4 +12V
ICOP Technology Inc. 15
Page 12
APL-PITX-N3350 User Manual
LVDS Inverter
Pin Assignment
1 Backlight Enable
2 Backlight PWM
3 VCC
4 VCC
5 GND
6 GND
7 Backlight SW+
8 Backlight SW-
GPIO Header
2
1
Pin Assignment Pin
1. GPIO00 2 GPIO01
3 GPIO02 4 GPIO03
5 GPIO04 6 GPIO05
7 GPIO06 8 GPIO07
9 GND 10 5V
10
9
Assignment
ICOP Technology Inc. 16
Page 13
APL-PITX-N3350 User Manual
Audio Header
Pin Assignment Pin
1. MIC-L 2 GND
3 MIC-R 4 AUDIO-JD
5 LOUT-R 6 MIC-JD
7 SENSE-FB 8 ---
9 LOUT-L 10 LINE-JD
Assignment
COM1 Header
RS232
Pin Assignment Pin
1. DCD 6 DSR
Assignment
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 GND 10 NC
RS422
Pin Assignment Pin
1. TX- 6 NC
2 TX+ 7 NC
3 RX+ 8 NC
4 RX- 9 NC
5 GND 10 NC
Assignment
ICOP Technology Inc. 17
Page 14
APL-PITX-N3350 User Manual
RS485
Pin Assignment Pin
1. DATA- 6 NC
2 DATA+ 7 NC
3 NC 8 NC
4 NC 9 NC
5 GND 10 NC
Assignment
COM2 Header
Pin Assignment Pin
1. DCD 6 DSR
2 RXD 7 RTS
Assignment
3 TXD 8 CTS
4 DTR 9 RI
5 GND 10 NC
PWR_RST: Power Button, Reset Button, Power LED, and Hard Disk LED
Header
Pin Assignment Pin
1. HDD_LED+
3 HDD_LED- 4 PWRLED-
5 GND 6 PWRBTN
7 RSTSW 8 GND
2 PWRLED+
Assignment
9 VCC 10 NC
ICOP Technology Inc. 18
Page 15
APL-PITX-N3350 User Manual
USB2.0 Header
Pin Assignment Pin
1. VCC 2 VCC
3 DATA- 4 DATA-
5 DATA+ 6 DATA+
7 GND 8 GND
9 --- 10 NC
Assignment
SMBus Header
Pin Assignment
1 VCC
2 DATA
3 CLK
4 GND
Buzzer
Pin Assignment
1 Buzzer+
2 Buzzer-
ICOP Technology Inc. 19
Page 16
APL-PITX-N3350 User Manual
LVDS Header
Pin
1. LVDSB_DATAN3 2 LVDSB_DATAP3
3 LVDS_CLKBN 4 LVDS_CLKBP
5 LVDSB_DATAN2 6 LVDSB_DATAP2
7 LVDSB_DATAN1 8 LVDSB_DATAP1
9 LVDSB_DATAN0 10 LVDSB_DATAP0
11 NC/DDC_DATA 12
13
15
17 LVDSA_DATAP3 18 LVDSA_DATAN3
19
21 LVDSA_DATAP2 22 LVDSA_DATAN2
23 LVDSA_DATAP1 24 LVDSA_DATAN1
25 LVDSA_DATAP0 26 LVDSA_DATAN0
27
29
Assignment Pin
GND 14
GND 16
LVDS_CLKAP 20
PVCC 28
PVCC 30
Assignment
NC/DDC_CLK
GND
GND
LVDS_CLKAN
PVCC
PVCC
ICOP Technology Inc. 20
Page 17
APL-PITX-N3350 User Manual
3 Technical Support Directly from ICOP
To offer you more accurate and specific solutions for the technical situations you have,
please prepare the information below before contacting ICOP:
—Product name and serial number
—Description of the H/W environment ( i.e.: working temperature, I/O
board information, information of connection between main board and IO boards,
and/or other devices, etc)
—Description of the S/W environment (i.e: operating system, version, application software,
and/or other related information, etc.)
—A detailed description and photos of the technical situation
—Any complement or technical situations you want ICOP more focusing on
User Manual Feedback
To make this user manual more complete, if you have any comments or feedbacks to this
manual, please feel free to write to info@icop.com.tw or contact your ICOP sales representative.
ICOP Technology Inc. 21
Page 18
APL-PITX-N3350 User Manual
Warranty
This product is warranted to be in good working order for a period of one year (12 months)
from the date of purchase. Should this product fail to be in good working order at any time
during this period, we will, at our option, replace or repair it without additional charge except as
set forth in the following terms. This warranty does not apply to products damaged by misuse,
modifications, accident or disaster. Vendor assumes no liability for any damages, lost profits, lost
savings or any other incidental or consequential damage resulting from the use, misuse of,
originality to use this product. Vendor will not be liable for any claim made by any other related
party. Return authorization must be obtained from the vendor before returned merchandise is
accepted. Authorization can be obtained by calling or faxing the vendor and requesting a Return
Merchandise Authorization (RMA) number. Returned goods should always be accompanied by a
clear problem description. Should you have questions about warranty and RMA service, please
contact us directly.
ICOP Technology Inc.
Address: No. 15 Wugong 5th Road, Xinzhuang Dist.
New Taipei City, Taiwan (R.O.C.) 24890
TEL: +886-2-8990-1933
FAX: +886-2-8990-2045
Mail: info@icop.com.tw
Website: http://www.icop.com.tw
ICOP Technology Inc. 22
Loading...