ICON Q 002 Users manual

70.00 mm

ICON Q CORPORATION

User Guide

Y062

I. Introduction

Great job on purchasing your new Joha Bluetooth
speaker! Using it should be easy and fun, so please read
through this user guide fully to make sure that's the case.
If you're not familiar with Bluetooth, check out the function
on the device you plan to use with the speaker, consult the
user guide, or simply ask someone who can help you get
acquainted.

III. Unit at a Glance

1

2 3

IV. Usage

A. CHARGING YOUR DEVICE
The Joha speaker offers convenient charging via a micro

USB port. For best sound quality, you must charge the
product fully before using it for the first time.

Steps:

1. Find the USB cable included with this product.

2. Connect the micro connector to the speaker’s micro

100.00 mm

And of course, safety first. Make sure to stick to the safety
rules at all the times to get the most out of your speakers.

For best sound quality, charge fully before first use.

PAIRING ID: Y062

II. What’s Inside

Y062 speaker
USB Cable (micro USB)
User Guide

MIC 3.5mm AUX input

Status indicator

1

Play/Pause/Call

2

Previous/VOL-

To play the previous song, press
once.
To decrease the volume, hold for
several seconds.

Next/VOL+

3

To play the next song, press once.

1

To increase the volume, hold for
several seconds.

Micro USB port

Charging indicator

POWER

OFF

ON

USB port.

3. Connect the other end to your computer’s USB port.
Make sure your computer is turned on. You can also
connect the cable to a USB power adapter for charging
with an electrical outlet.

4. When charging, the charging indicator light on the
bottom of the speaker will turn red.

5. When fully charged, the charging indicator light will
turn off.

B. PAIRING DEVICES
To use your Bluetooth speaker, you must first pair it with a

Bluetooth-enabled device, such as a smartphone or a
computer. In the future, the speaker will automatically
recognize and connect to the Bluetooth device it has been
paired to previously.

!

IV. Usage (Continued)

Steps:

1. Make sure the speaker is charged. Turn on the
speaker.

2. The status indicator light on the bottom of the speaker
will flash red and blue rapidly. The speaker is in
pairing mode.

3. Turn on your Bluetooth device and ensure its Bluetooth
function is activated. You will find this option on most
devices under Settings or Options.

4. Follow your device’s instructions to search for Bluetooth
devices. After a few seconds, your Bluetooth device will
list the speaker as a discovered device. The speaker ID
is “Y062”.

5. Select the speaker, and pair the two devices. If asked
for a passcode, enter “0000”.

6. When the status indicator light blinks blue, it means
your Bluetooth-compatible device has been successfully
connected.

C. PLAYING AUDIO AND TAKING CALLS
Select the program on your Bluetooth device that you want

to use with the speaker, and press play from that program.

Once the speaker is playing, use the speaker’s PLAY/PAUSE

button to pause and restart audio.

During an incoming call, press the same button to answer

4 5 6

the call. Press again to end the call. The speaker will

resume playing.

D. CHANGING SONGS AND ADJUSTING THE VOLUME
See Part III., "Unit at a Glance".

E. AUX INPUT

In addition to playing audio via Bluetooth, this product also

supports AUX input.

To use, connect a 3.5mm line-in cable from the speaker to
any device with a headphone jack or audio output. If you
choose to disconnect the cable and resume Bluetooth
mode, press the speaker's PLAY/PAUSE button to restart the
audio in Bluetooth mode.

V. Safety Guidelines

Please follow the safety guidelines below at all times
when operating or caring for your device.

• Listen to music at a proper volume to avoid hurting your

hearing and the speakers.

• Do not connect an external amplifier to the AUX input.

• Avoid storage in high temperatures, such as in a hot

vehicle or in direct sunlight.

• Do not expose the speaker or any of its supplied parts to

rain or other liquids.

• Do not drop or cause undue impact to the speaker.

1 2

• Do not modify, repair, or dismantle the product on your

own.

VI. Specifications

Model Number: Y062
Bluetooth version: v2.1+ EDR (Enhanced Data Rate)

Range: 10 m (approx. 33 ft.)

Frequency range: 100Hz-20KHz

Signal-to-Noise: ≥ 95dB

Driver: 45mm
Rating power: RMS 3W (THD≤0.5%)
Battery specification: 3.7V, 450mAh
Input voltage: DC5V

Playing mode: Bluetooth/AUX
Size: 60mm x 60mm x 50mm

Weight: 230g

VII. Support

If your device is not functioning correctly, please visit
www.johausa.com for customer support, and we will be
more than happy to help you.

VIII. Limited Warranty

For more information and instructions on how to get
warranty service, visit www.johausa.com.

FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for Class B
digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15
of the FCC rules. Do not make any changes or modifications to the equipment
unless otherwise specified in the manual. If such changes or modifications should be
made, you could be required to stop operation of the equipment.

QDID: 49207

1225 Franklin Avenue, Suite 325 Garden City, NY 11530

©2014 Icon Q Corporation

3

7