PURE
INSTRUCTION
MANUAL
FOR USE
www.iconeway.com
INSTRUCTION MANUAL FOR USE
This manual contains important information about safety and performance services.
Please read the warnings and precautions contained in this manual
before using the ICONE e-Bike.
If you lend your electric bicycle to others for use, let users carefully read the instructions in
order to minimize the possibility of accidents.
LEGAL PROVISIONS
To use the Assisted Pedal Bicycle, it is mandatory to follow the trafc regulations in force in your country
(Highway Code). In most countries, using a Pedal Bicycle does not require any type of authorization, nor to
a Driving License. However, users are encouraged to inform him/her-self of any eventual authorizations or
permits that may be required local law enforcement to ride Bicycles with Assisted Pedaling on public roads
(see the Highway Code).
ICONE Assisted Pedal Bikes comply with the provisions of Art. 50
of the Highway Code:
Bicycles are vehicles with two wheels or more wheels operating exclusively muscular propulsion, by means of
pedals or similar devices, operated by the persons who are on the vehicle; Pedal-assisted bicycles, equipped
with an electric auxiliary motor having a maximum continuous nominal power of 0.25KW, are also considered
bicycles. Their power supply is progressively reduced and nally interrupted when the vehicle reaches
25 km/h rst if the cyclist stops pedaling.
EUROPEAN DIRECTIVE 2002/96/EC
This symbol means that the bicycle is subject to the European Directive 2002/96/EC
and requires you to dispose of the parts of the bicycle separately from household waste,
delivering it to a special return and collection center.
CE BRAND
CE marking on the product plate. This symbol means that the pedal assisted bicycle
complies with all the basic safety requirements of applicable European directives.
THIS ASSISTED PEDAL ELECTRIC BICYCLE HAS BEEN CAREFULLY DESIGNED AND
PRODUCED FOLLOWING THE LATEST INTERNATIONAL QUALITY STANDARDS INCLUDED:
EN 14764-2005 EN 15194-2009 Version 1.0
CONTENTS
1. Important information
2. Checks before the rst hike
3. Driving
4. Folding and methods of use
5. Use of your e-Bike ICONE
6. Recharging and protecting the battery
7. Maintenance and repair
8. Issues requiring attention
9. Maintenance
10. Technical parameters
11. Information on the assistance service
12. ICONE e-Bike certicate
13. Delivery report
WARNING!
DANGER!
IMPORTANT INFORMATION ON THE ICONE BICYCLE
The addition of incorrect accessories or components designed for this e-Bike can cause
damage to the latter and compromise the safety of its operation. Such additions may lead
to dangerous driving situations, falls and accidents.
Never add equipment to your e-Bike by yourself and never try to modify it yourself.
ACCESSORIES
Always choose accessories and components for modications together with a specialist
dealer who has received specic training. With reference to the accessories and the extra
weight involved, and always take into account the maximum weight allowed by the bicycle.
The following accessories can be requested:
• Equipment for transit on public roads according to the regulations enforced in the
country of use, if not available as standard.
• Roof rack.
• Child seat when using an approved roof rack
for such a seat.
• Consult the dealer.
• Luggage bags in case of use of a luggage rack approved for these bags.
SAFETY AND BEHAVIOR
Dear ICONE customers,
Congratulations on purchasing a new ICONE e-Bike. You have purchased a bicycle
that will surely live up to your expectations of quality, function and driving.
In order to ensure maximum safety when using this product, please read this instruction
manual carefully.
With the purchase of this ICONE e-Bike you have chosen a quality product. Your
new ICONE e-Bike was made with parts that have been developed and produced
with precision.
In this manual you will find a collection of tips on the use of the ICONE e-Bike,
as well as important information about its construction features, care and maintenance.
In recent years, bicycle construction technology has made great progress. Therefore,
please read this user manual carefully, even if you are an expert cyclist.
SAFETY AND BEHAVIOR
The driver must be at least 16 years old.
The driver must be able to ride a bike, must have basic knowledge of the use of a bike, and be
equipped with the sense of balance necessary to drive and control a Pedal Assisted bicycle.
The driver must be able to get on and off safely when stationary. This applies in particular to
ergonomic saddles, if when seated, the driver cannot touch the ground with his feet. Like the other
bicycles, the e-bike can only transport one person at a time.
The physical size of the driver must be adapted to the bicycle and the maximum permitted weight
must not be exceeded.
The driver should be in optimal physical and mental shape.
If the driver wishes to drive the e-bike on public roads he/she must be physically and mentally
able to drive in road traffic.
PHYSICAL / MENTAL RESISTANCE
The Pedal Assisted bicycle allows you to drive at high speeds for long periods of time.
The driver must have the necessary resistance to safely handle and operate the e-bike
for at least two hours.
Pedal Assistance does not allow you to compensate for illness or a lack of physical fitness.
DANGER!
To recharge the battery pack of the pedal assisted bicycle, use only the supplied battery
charger. Keep the charger and the bicycle away from animals, children, and/or people who
are unable to understand the danger. Prevent the charger from coming into contact with water
and do not store in damp places. Do not charge the battery pack in the sun. Keep the battery
pack and the charger away from sources of heat (such as radiators). Charge the battery only
in your presence.
Never use the charger, or if it is operating, immediately remove the plug in
the following conditions:
• If the charger shows damage of any kind.
• If the insulation of the cables or one or more plug connections are damaged.
In this case, grasp the plug only at an isolated point. If necessary,
deactivate the corresponding fuse in the electrical distribution box.
• If the charger heats up in an unusual way. A negligible development of heat in the charger
and in the battery is normal.
• If there are unusual noises (eg: loud hum, hissing, etc.)
• If at power on and off, or when inserting and disconnecting, sparks form.
• If smoke develops in the charger or bicycle.
1. IMPORTANT INFORMATION
This manual contains important information about safety and performance services.
We ask for your cooperation in the case of any differences or non-compliance with the manual.
Please read the warnings and precautions contained in this manual before using the ICONE e-Bike.
If you lend your electric bicycle to others for use, let users carefully read the instructions in order to
minimize the possibility of accidents.
Wear appropriate and qualified helmets while using the E-bike.
Always wear at least one suit with a fluorescent or reflective strip when driving under poor light
conditions. Always check that the front and rear lights are working, that the brakes are working
properly. Turn on the lights in dark or poor visibility. If you cannot turn on the lights, it is advisable
to bring the bike by hand (walking). In case of rain and/or snow, it is recommended to brake in
advance, reduce speed, and increase the safety distance.
Acceleration is one of the main causes of bicycle accidents. Therefore, speed limits must be respected
and the speed limit of 25 km/h must never be exceeded even when descending.
This e-Bike is made in compliance with all current regulations and in particular:
the European directive 2002/24 / EC which defines pedal assisted electric bicycles equipped
with an electric auxiliary motor having a continuous nominal power of up to 250 watts, the power
supply of which is reduced and finally interrupted when the vehicle reaches 25 km / h or earlier if
the cyclist stops pedaling.
The engine must never be in operation when the passenger stops pedaling.
This e-BIKE is made respecting all the regulations in force and in particular:
• Activation of the motor only in the presence of the pedal stroke (pedal assisted)
• Maximum speed 25 Km/h
• Power less than 250 watts
Do not touch the parts of the bicycle and battery power, or use metal to touch parts of the bike,
as this can cause a dangerous short circuit.
If you want to increase your mileage, pay attention to the correct tire pressure, try to pedal
consistently and maintain a stable speed. Brake when necessary and do not wait to be too close to
those in front of you or to the point where you want to stop.
Avoid exposure to strong sun and rain, avoid places where the temperature is too high or the
corrosive gas is present. This is to avoid surface damage and chemical corrosion of paint and
electrical components which can, in turn cause malfunctions and accidents.
The driver must be able to understand the potential dangers when using the e-bike.
For the minimum driving age, refer to the national laws. Bringing a second person
aboard the e-bike is strictly prohibited.
WE RECOMMEND THAT YOU DO NOT TO MODIFY
THE TECHNICAL CHARACTERISTICS OF THE E-BIKE!
For further information please consult the website
www.iconeway.com
2. CHECKS BEFORE THE FIRST EXCURSION
CAREFULLY CHECK THE STATE OF THE BICYCLE BEFORE USE:
• Carefully check the brakes, wheels and tires, the foldable connection and
the quick disassembly parts, to ensure that the bicycle is in good condition.
• Check that the battery charge is sufficient to support the mileage you intend to drive.
• Always consider at least 25% more kilometers than you intend to travel.
• Check the brake system: Make sure the braking system is working properly;
if it is not possible to use it correctly, check and adjust it, contact a highly qualified technician
or contact our customer support.
• Check the closure and safety of the wheels.
• Check functionality of all components.
• Check to make sure that the handlebar and seat are safely hooked up and secure.
Make sure that all nuts, bolts, and screws are tight enough.
3. RIDING
POWER ON:
Turn on the switch (turn the key to ON) the display will light up when connected.
EPAC/PEDELEC:
Just like normal bicycles, position the bike and get onto the saddle, place one foot on the pedal
and start pedaling after ensuring that everything is OK. Once the speed is reached during the
ride, the engine will automatically activate and start working and moving your e-Bike. To stop the
engine, stop pedaling and the engine will stop automatically. To stop the e-Bike use the brakes. The
brakes have the function of interrupting the operation, if both levers are activated, the power will be
interrupted automatically and the engine will stop.
ASSISTED POWER VARIATION (VPA):
In case of problems with acceleration, you should have received or chosen a potentiometer. This
installation is only compatible with e-Bike with Pedal Assist. The potentiometer configuration
provides three different levels of assisted power during pedaling that coincides with the different
road surface conditions. It is very useful during a long journey.
CALIBRATE THE BATTERY LEVEL:
When the battery is running low, the lights will weaken (the lights will go out one by one) at this
point you have to turn off the switch and use the pedals like a regular bicycle. You must recharge
the battery when you are near a power outlet so that the Assisted Pedaling can be used again.
PARKING AREA:
Switch off and remove the key from the battery while parking. Make sure that the switch is set to
OFF so as not to start the engine accidentally. We recommend using a lock to protect your e-Bike
if necessary.
WARNING!
Frequent use of the brakes, turning the e-Bike on and off repeatedly, pedaling upwind, uphill,
or carrying a lot of weight can affect battery life, compromising the duration and time of travel.
4. BENDING AND METHODS OF USE
BENDING METHOD:
• Remove the lifting handle.
• Release the safety clip ring.
• Open the folding handle and fold the upper end down
• Adjust the position.
The folding method of the frame is the same.
Add lubricating oil to the frame folding device often.
5. USE OF YOUR E-BIKE
If you do not use the electric bike for more than 5 minutes, the display will turn off automatically.
Adjust the speed as necessary and with the + and - buttons.
It is recommended to start slowly and then increase according to road conditions
and traffic.
Indications on the e-Bike display:
Power switch
Adjusting the change/Adjusting the parameter +
Adjusting the change/Setting the parameter Displaying electric charge
LED floodlight: turn on the light
Error code
Total mileage
Partial mileage
Overall mileage
5.1 TROUBLESHOOTING
PROBLEMES POSSIBLE CAUSES SOLUTIONS
Set the switch to ON,
the indicator light does not
light up, the motor does not
work, there is no electricity
in the e-Bike.
The travel distance
decreases.
The indicator light does not
come on during charging.
Other issues
1. The battery is completely empty.
2. The electrical connection cable
of the battery is loose.
3. The fuses are burned.
1. Insufficient battery capacity.
2. The battery is running out.
3. Brake continuously, pedal uphill
or upwind.
1. The connection cable is loose.
2. Fuses are burned.
3. The charger is damaged.
Any problem with electrical
components
1. Charge the battery.
2. Adjust the cable.
3. Change the fuses.
1. Charge the battery completely.
2. Change the battery.
3. Use more physical pedaling.
1. Insert the cable appropriately.
2. Change the fuses.
3. Change the charger.
Contact the local seller
or at the service center for help.
6. CHARGING AND PROTECTION OF THE BATTERY
Use the charger that corresponds to your e-Bike (never use the charger of a different model). Before
charging, set the switch to OFF and remove the key. Keep the charger in a dry and ventilated place
when not in use.
The charger is designed for internal use. Keep the charger far from water to avoid short circuit. Do
not use in humid and flammable environments. Do not remove the connector by pulling the cable,
always unplug the charger from its metal body.
Connect the charger output plug to the battery power socket correctly,
then insert the plug into the wall socket.
When the light changes from Red to Green it means the battery is fully charged. Usually a 4-6
hour time frame is required to fully recharge the battery. However, it is a good idea to recharge the
battery for an additional 2 hours to protect the battery life.
Do not charge the battery for more than 10 hours to avoid overcharging and damaging the battery.
After the light turns green, the charger will continue to charge the battery if not unplugged. If you
plan to stay away from home for a long time, disconnect the charger so as to avoid overheating
and overcharging.
The charger will become hot while charging, so keep it away from heat sources. Always keep the
charger clean and dry. The charger contains high-voltage electronics, therefore do not disassemble
the charger yourself.
After charging, first remove the plug from the electrical outlet and then from the e-Bike battery.
Do not leave the connector plugged into the battery and the outlet for a long time, as it may damage
the battery and/or cause a fire.
When charging, keep out of reach of children. Do not place anything above the charger during use,
do not allow any liquid or metal to enter the charger.
You can also remove the battery from
the e-bike and recharge it.
You have to raise the saddle with the lever located below it, which will allow you to remove the
battery. First, you must unlock the battery with the ignition key. Once the charging is complete,
replace the battery by inserting it into the holder and then lock the battery with the ignition key
again.
Do not touch any of the poles of the battery case with your hands when the battery is removed.
In addition, the polishing poles must not come into contact with any metal or other conductive
material, as it could cause a short circuit.
If you have not been cycling for a long time, the battery should be charged at least once a month.
This will ensure a good battery life.
DO NOT USE when the level of the battery is low. Do not leave the battery empty for a long time.
The battery will continue to discharge itself causing damage.
Avoid any contact with liquids while charging. If the connector or socket is wet,
dry thoroughly before use.
If you experience extremely high temperatures during charging, or smell a peculiar odor, stop
charging and contact your local distributor or Customer Service Center.
7. MAINTENANCE AND REPAIR
The front and rear wheels of the vehicle must be in the center of the front fork and the frame. The
tension of each spoke of the rim must be similar, maintaining the rim with a normal shape, without
breaking or bending.
The edge of the bicycle must be smooth, transporting flat objects from the front increases the drag
while driving and therefore the danger when driving.
Regularly check the brake pads for wear, to ensure safety.
Avoid walking in wet or snowy conditions, if you cannot avoid it, drive at low speed and keep a
greater distance from the vehicle in front of you.
Check the tires regularly. If an accidental tire failure has occurred,
contact a professional technician for repair or replacement.
8. MATTERS THAT REQUIRE ATTENTION
Every time you ride your bike, you need to check the distance, strength,
and efficiency of the brakes.
Attention: if the brakes work abnormally, the motor may stop working.
• Respect traffic laws and regulations, never reverse if not in
absolute safe or secure to do so.
• Contact professional technicians to keep the electric bicycle in top condition;
check the brakes, transmission, and other components regularly.
The maintenance of your e-Bike is essential to extend its life.
Keep in mind that:
• The locking mechanism of the wheel groups must not move.
• The quick release lever must be closed.
• You should not hear squeaking noises.
• Tires - check valve position.
• Due to the stresses and insufficient tire pressure, the tire and the inner tube could move
around the rim and give rise to an oblique position of the valves. In this case, the valve base
can
tear off while driving, causing a sudden loss of tire pressure.
• Check the tires.
Ensure that there is no external damage, or wear and tear of the tires:
• The entire surface of the tire must have the original profile.
• The texture of the tire under the rubber layer must not be seen.
• There should not be dents or cracks.
• Remove any foreign objects (plugs, small stones, fragments of glass or similar) with your hands,
or using a small screwdriver with caution. Check if air leaks after this operation. In the event
of an air leak, the tube must be replaced. You can replace the tube yourself by following
the corresponding instructions.
• Pressure control.
Due to insufficient tire pressure:
• The tire and the inner tube could move around the rim and give rise to an oblique position
of the valves. In this case, the valve base can tear off while driving, causing a sudden loss
of tire pressure.
• When cornering, the tire may come off the rim.
• Increases the frequency of faults.
9. MAINTENANCE
WARNING!
Before carrying out any type of maintenance, switch off and remove the key. If the poles of the
battery are dirty, clean the poles so as to not to reduce the efficiency of the battery or burn the
poles themselves.
CHAIN TENSION ADJUSTMENT:
The chain may loosen after a certain period of time; please follow the instructions below:
Loosen the rear axle bolts. If the chain is too loose, adjust the chain bolts on both sides clockwise
and place them in place. If the chain is too tight, adjust the bolts counter-clockwise. Keep the crank
and the wheel aligned. If you cannot adjust the chain properly, contact your nearest dealer.
ADJUST THE BRAKES:
The correct adjustment of the brakes ensures control and provides safety to the driver: the brakes
are adjusted like any other bicycle. To be in good condition it is important to make sure that the
brakes are working and that the power supply stops.
Once the brakes have been adjusted, make sure that the wheels turn, that there are no obstacles,
and that once the brakes are pulled the engine stops working.
LUBRICATION:
To maintain your e-Bike for a long time, the following parts of the bicycle should be regularly
lubricated every six months: front axle, chain, rear axle, freewheel (overspray joint), rear fork and
other rotating parts.
No lubrication is required for the electrical parts, as they are already lubricated at the factory. If you
have any problems, contact your nearest dealer for assistance.
CLEANING:
The e-Bike should be cleaned with a damp sponge, taking care not to wet the electrical parts (bars,
connectors, motor, cables, handlebar controls, etc.). Dry with a cloth. When cleaning the e-Bike,
do not use continuous jet steam or direct water. Use a cloth to avoid a short circuit for electrical
components. The e-Bike has a durable finish and does not need wax. Clean with a mild detergent
and wipe to restore the original shine if necessary.
10. TECHNICAL DATA
Weels 20” KENDA / CST**
Mechanical disc brake fr. / rr.
Suspension fork
Rear SHIMANO 6 speed
Crank in steel
Bolts in steel
Light a LED operated display on
Foldable and height adjustable handlebar
Foldable saddle for battery extraction
Motor 250W Brushless
Max weight capacity 115 kg
Easel rear
Aluminum rims reinforced
Fenders
Folding frame
Folding pedals
Battery Litio SAMSUNG 36V - 10Ah
Charging time 4 - 6 hours
Max autonomy 30-40 km*
Battery weight 2.8 kg
Frame 42 cm
Net weight 25 kg
Weight without battery 22 kg
Folded dimensions 960x600x700 mm
Packaging 1005x500x800 mm
Rear Battery Wheels
* The maximum range may vary depending on the weight of the driver, the type of driving and the route taken.
** Where expected depending on the configuration.
**
11. INFORMATION ON THE ASSISTANCE SERVICE
Users must operate according to this product manual, in case of production defects, according to
the provisions of the law, the company fulfills its warranty obligations.
After the warranty period has expired on the main components, all services will be
subject to payment.
In case of battery replacement beyond the warranty period, the battery will be supplied at the
current price, but the battery must be recycled 1:1, the battery must be disposed of or returned
to the battery manufacturer to ensure safe disposal.
WARRANTY
24 MONTHS on all mechanical, bicycle and electric parts.
6 MONTHS on the battery.
NOT EXCLUDED FROM THE WARRANTY All parts subject to normal wear and tear are
(by way of example, but not limited to, brakes, handles, tires and other similar parts).
THE FOLLOWING ARE NOT COVERED UNDER THE WARRANTY:
Accessories installed after purchase.
Malfunctions caused by improper use or accessories not indicated.
Damage caused by installation or installation of improper accessories.
Collision damage caused by external forces.
Any other damage also to components under warranty where caused by improper use. Any other
damages caused by wear are excluded from the warranty.
In case of defect, the following must be provided: complete packaging,
product, all accessories attached, and original invoice.
12. E-BIKE CERTIFICATE
Model
Color
Special features/accessories Rear pack holder, front and rear light kit
Brake lever
assignment
of the levers
Stamp and signature of the ICONE specialist dealer
Right lever
front wheel brake
rear wheel brake
12. GUARANTEE CARD
Customer
Surname, Name
Address
Post code / Localion
Tel / Fax
E-mail
Left lever
front wheel brake
rear wheel brake
Model
Please keep this card handy.
When maintenance is required, with the invoice
or receipt, contact for after-sales service.
13. DELIVERY REPORT
The delivery of the above-mentioned ICONE e-Bike to the customer, after the final assembly, should be in
running condition. Verification of the regular operation of the points indicated below (the further necessary
operations are shown in brackets).
Lighting
Front and rear brakes
Wheels (centering/tension
of spokes/inflation pressure)
Handlebar/handlebar stem
(position control/screws)
Pedals (pedal closure control)
ICONE specialist dealer
Name
Address
Location
Tel.
Fax
E-mail
Delivery date Stamp
Signature of the ICONE specialist dealer
Saddle/saddle supports (adjusted saddle height
and position according to customer needs)
Change (end stop)
Component screws
Test run
Other operations performed
With his signature, the customer confirms that he has received the ICONE e-Bike and confirms
that he has been instructed on the operation of the ICONE e-Bike.
Customers
Surname, Name
Address
Post Code / Location
Tel / Fax
E-mail
Place Date
Signature
NOTES
Photograph the QR code with
a smartphone or tablet and
discover the ICONE world.
Connection costs based on
the mobile phone contract.
#iconeway
www.iconeway.com
© 2019 ICON.E | All rights reserved.
Loading...