Page 1
2 Mic/1-Instument in, 2 Line out recording USB Interface
with DSP effect built-in for PC or Smart Phone
User manual
Page 2
Important Safety Instructions
1. Read this manual thoroughly before using this unit.
2. Keep this manual for future reference.
3. Take notice of and comply with all warnings included in the user's manual or indicated on the
appliance.
4. Follow all instructions included in this manual.
5. Do not expose this unit to rain or moisture. Avoid having water or other liquids spilled on this
unit.
6. When cleaning the cabinet or other parts of this appliance, use only a dry or slightly damp soft
cloth.
7. Do not block any ventilation openings or interfere with the proper ventilation of this unit. Install
in accordance with the manufacturer's instructions.
8. Do not use or store near any heat sources such as radiators, heat registers, stoves, or other heat producing appliances.
9. Do not interfere with the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding-type plug has two blades and a third
grounding prong. These are designated for your safety. If the provided plug does not fit into your
outlet, consult an electrician.
10. Protect the power cord from being walked on or otherwise damaged by items placed on or
against them. Particular attention should be given to the plugs, receptacles, and the point where
the cord exits the appliance.
11. To avoid the risk of electrical shock, do not touch any exposed wiring while the unit is in
operation.
12. Only use attachments/accessories specified by the manufacturer.
13. Unplug this unit and all connected electrical equipment during lightning storms or when left
unused a long period of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the appliance has
been damaged in any way or fails to operate normally.
WARNING: To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture
Page 3
Contents
Introductions .............................................................................................4
What’s in the package? ............................................................................4
Register your ICON ProAudio product to your personal account ........... 5
Features ...................................................................................................6
Front/Top Panel ........................................................................................7
Rear Panel.............................................................................................. 11
Controlling the DSP effects including FX/Vocal Tune/Pitch Shift/EQ
with the two encoders .............................................................................12
Hardware Connections (with PC/Mac only) ............................................14
Hardware Connections (Use as a standalone device) ...........................15
Minimum System Requirements.............................................................16
Specications .........................................................................................17
Services ..................................................................................................18
Page 4
Introductions
Thank you for purchasing the ICON ProAudio UpodLive digital audio Interface. We
sincerely trust this product will provide years of satisfactory service, but if anything is
not to your complete satisfaction, we will endeavor to make things right.
In these pages, you'll nd a detailed description of the features of the UpodLive
digital audio interface, as well as a guided tour through its front and rear panels,
step-by-step instructions for their setup and use, and full specications.
Please register the product on our website at the below link
www. iconproaudio.com/registration:
Please follow the step by step procedures. Start by inputing the device’s serial
number as well as your personal information, etc. By registering your product online,
you will be entitled to service and after-sales support at our Help Center by visiting
our website at www.iconproaudio.com. Also, all the registered products under your
account will be listed on your personal product page where you will nd updated
information such as rmware/driver upgrades, software bundles, user manual
downloads, etc. for your device.
As with most electronic devices, we strongly recommend you retain the original
packaging. In the unlikely event the product must be returned for servicing, the
original packaging (or reasonable equivalent) is required.
With proper care and adequate air circulation, your UpodLive digital audio interface
will operate without any trouble for many years. We recommend that you record your
serial number in the space provided below for future reference.
What’s in the package?
● UpodLive USB Recording Interface
● Quick Start Guide
● USB 2.0 cable
● 3.5mm TRS audio cable x 1pc
4
Page 5
Register your ICON ProAudio product to your personal account
1. Check serial number of your device
Please go to http:// iconproaudio.com/registration or scan the QR code
below.
Input your device’s serial number and the other information on the screen. Click
“Submit”.
A message will pop up showing your device information such as model name
and it serial number - Click “Register this device to my account” or if you see
any other message, please contact our after-sales service team
2. Log in to your personal account page for existing user or
sign up for new user
Existing user: Please log into your personal user page by inputing your
user name and password.
New user: Please click “Sign Up” and ll in all the information.
3. Download all useful materials
All your registered devices under your account will show on the page. Each
product will be listed along with all its available les such as drivers, rmware,
user manual in different languages and bundled software etc. for download.
Please make sure you have download the necessary les such as driver before
you begin device installation.
5
Page 6
Features
The ICON UpodLive USB recording interface provides an audio input and output
module with USB connectivity for your PC or Smart Phone. Main features include:
● Smart device digital (type C) and analog (TRRS) connection jacks are both
equipped
● Compatible with iOS and Android Digital I/O jack (Type C) & Analog I/O jack
(3.5mm stereo TRRS) is equipped for direct connection with Smart Phone
● Built-in ICON Hi-end DSP effects
● Large LCD display with two large control knobs for controlling DSP effects and
main functions
● 16-Bit 48KHz 2 mic-In/1 instrument-In, 2-Out USB Recording Interface
● 2x2 analog I/O full duplex recording and playback
● ICON mic-preamp with individual gain control
● +48V phantom power equippedFunctions as a stand-alone device with RCA input
& DSP processing.
● 2 analog outputs on 1/4” TRS jacks
● Build-in stereo 3.5mm stereo TRS line-in with individual gain control
● Functions as a stand-alone device with 3.5mm stereo TRS input jack & DSP
processing
● Attenuator (Voice-Over) function button equipped for music fade-out automatically
when mic signal is present
● Buttons equipped for controlling mic signal (dry/wet) recording to PC/Smart Phone
● Buttons equipped for controlling monitoring signal (dry/wet)
● Master volume control on the top panel
● 2 headphone outputs on 1/4” TRS jack and 3.5mm stereo with individual volume
control
● USB2.0 compatible and USB bus-powered
● Switch for connecting Apple (iOS) or Android smart phone
● Plug & play and no driver installation is needed
● Compatible with Mac OS (Intel-Mac) and Windows XP, Vista (32-bit/64-bit),
Windows 7 (32-bit/64-bit) & Windows 10 (64-bit)
6
● Full duplex, simultaneous record/playback
Page 7
Front/Top Panel
10
69
11
12
13
5 7
11
18
17
15
16
14
2
1
43
8
1. “Mic”Inst 1/2
Unbalanced mic level inputs. These hybrid connectors will accept a standard
3-pin XLR plug or a 1/4” TS connector.
Note: +48V phantom power will only be provided to XLR connector.
2. HI-Z input & gain control
This is high impedance input for guitar/bass with individual gain control knob.
3. Mic/Instrument input switch
Switch input from mic to Instrument or vice versa.
4. 48V phantom power switch
Press to supply +48V phantom power to both XLR input. This phantom power
circuit is suitable for most condenser microphones.
5. Input gain level controls 1/2
These potentiometers control the input level of the associated analog
microphone (& instrument) inputs.
6. Master level control
This potentiometer controls the master output level of the analog outputs.
Note: Master level control will only adjust the output level of both the Line output
1/2 and the 3.5mm stereo output.
7. Headphone level control
These potentiometers control the output level of the associated headphone
output.
8. Headphone output
These output jacks accept a standard 1/4″ stereo TRS headphone and a 3.5mm
stereo TRS connector.
7
Page 8
9. Line in gain level control
This potentiometer controls the input level of the Line-in inputs.
10. LCD backlit display
The two-line backlit LCD display shows the parameter values as you adjust them
and also provides feedback about channel selections, operating modes, and
more.
11. FX/Vocal Tune/Pitch Shift/EQ control knobs
These two encoders are provide to adjust the settings and parameters of FX,
Vocal Tune, Pitch Shift and EQ
12. FX/Vocal Tune/Pitch Shift/EQ display LED
These LEDs show the active control settings on the LCD. Press the left control
knob to switch the active control manual from FX, Vocal Tune, Pitch Shifty or
EQ.
13. Signal ow control buttons – Recording/Live Streaming &
Monitoring
There are mainly two group of buttons (2x4) controlling the “Recording/Live
Streaming” and “Monitoring” signal ow.
Recording/Live Streaming button group consists of:
Dry
Wet
Line In
PC Out
Only Mic/Inst input signal will be recorded or live streamed (no
DSP processed).
Mic/Inst input signal with DSP processed will be recorded or live
streamed.
Only Line in input signal will be recorded or live streamed (Note: If
LiveRemote is being used, its signal will also blend with the Line in
signal)
PC or Smart Phone playback signal will be recorded or live
streamed.
Monitoring button group consists of:
Dry Only monitoring the Mic/Inst. input signal.
Wet Monitoring Mic/Inst. input signal with DSP processed.
Line In Monitoring the Line in signal
PC Out Monitoring the PC or Smart Phone playback
8
Page 9
14. LiveRemote sensor
An optional device “LiveRemote” is available for triggering sound sampler remotely
when you doing live streaming. Please contact our dealer nearest you for product
information.
15. Mode button
Press to switch & activate between different channel signal ow presets including:
P0 Custom
Chan
Allow you to self dene your desired channel signal ow by
activating the different buttons on “Recording/Live Streaming” and
“Monitoring” button group
P1 Chat Intended for internet chatting application
P2 Music Intended for music listening application
P3 Gaming Intended for internet gaming application
P4 Host Intended for host live streamer
P5 KTV Intended for internet karaoke application
P6 Record
Dry
Intended for dry recording application
Please refer to the below chart for the relation between the activated buttons
at each preset mode
Recording/Live Streaming Monitoring
Mode Dry Wet Line-In PC Out Dry Wet Line-In PC Out
P0 Custom
Chan
P1 Chat Activated Activated Activated
P2 Music Activated Activated
P3 Gaming Activated Activated
P4 Host Activated Activated Activated Activated Activated
P5 KTV Activated Activated Activated Activated Activated Activated Activated
P6 Record
Dry
Activated Activated Activated Activated Activated Activated
User seif dene as will
9
Page 10
16. Vocal Tune button
Press to activate the “Vocal Tune” function. To adjust the settings, please refer to
P12.
17. Pitch Shift button
Press to activate the “Pitch Shift” function. To adjust the settings, please refer to
P12.
18. Attenuator (Voice-Over) button
Activating the attenuator (Voice-Over) function will allow the music signal from
PC & RCA inputs to be ramped down when there is input signal from input 1 or 2.
Signal will gradually ramp up again if there is no input signal.
10
Page 11
Rear Panel
5
23
14
1. 3.5mm TRS input connectors
These are unbalanced analog inputs on 3.5mm TRS connector at –10dB line
level.
2. Line outputs 1/2
These are unbalanced analog outputs on standard 1/4″ TS connectors at +6dBU
line level.
3. USB 2.0 compatible Connector (Type-C)
Connect it with the provided USB cable to your Mac/PC’s USB connector. When
you run the live streaming application, you have to connect it with an OTG cable
that allows you to connect to both your PC and smart phone together
4. 3.5mm TRRS Smart Phone connection jack
Connect this jack with the provided cable to your smart phone’s headset input
jack.
5. Power supply connector
UpodLive is USB-bus powered. If your computer does not supply sufcient
power, connect an ICON 5VDC power supply adapter to this jack. Or you may
try to use your smart phone power adapter with the connect cable type (Android).
Normally it should work and provide enough power to the device.
(Note: You can get the power adapter from ICON distributors/dealers near you)
(Note: External power adapter is needed if the UpodLive is using as a
standalone unit)
11
Page 12
Controlling the DSP effects including FX/ Vocal Tune/Pitch Shift/EQ with the two encoders
There are four main different types of DSP effects including FX, Vocal Tune, Pitch
Shift and EQ.
Left control knob
(Press)
Left control knob
(Rotate)
Right control knob
(Press)
Right control knob
(Rotate)
Below please nd a table showing the four DSP with all its available presets,
parameter settings etc.
Press to switch between the four DSP setting manuals
and there are four LEDs under the LCD showing the
current active DSP manual.
Rotate the knob to select different DSP preset.
Press to switch between the parameters.
Rotate to adjust the value of the selected parameter.
12
Page 13
13
Page 14
Hardware Connections (with PC/Mac only)
or
or
or
Power Pack
MAC / PC
Connect the UpodLive digital audio interface outputs to your amplier, powered
monitors or surround system. Two-channel stereo operation, the default outputs are
channels 1 and 2.
If you are monitoring through headphones, connect your headphones to the device’s
headphone output.
Connect your microphones to the device's analog input.
14
Page 15
Hardware Connections (Use as a standalone device)
15
Page 16
Minimum System Requirements
Important: The UpodLive digital audio interface is supported by Mac OS (Intel-
Mac), Windows XP, Windows Vista, Windows 7 (32-bit/64-bit),and Windows 10
(32-bit/64-bit). The UpodLive digital audio interface is not supported by Windows
98 or Windows Me. For Windows XP, you must be running SP1 or later. Visit the
Windows update web pages to make sure you have the most current updates and
xes supplied by Microsoft. On the Mac, the UpodLive digital audio interface is
supported by Mac OSX version 10.11.6 (El Capitan) or later (must be Intel-Mac).
Earlier versions of Mac operating systems are not supported.
Windows OP:
Pentium 4 -1.0GHz or higher
1.0Ghz RAM
DirectX 8.1 or higher
Windows XP (SP1), Windows 2000 (SP3), Windows Vista or Windows 7 or Windows
10
Mac OP:
Intel-Mac 1.0GHz or higher
1.0GHz RAM
OS 10.11.6 or later
16
Page 17
Specications
Mic Input:
Frequency Response ..................................... 22Hz to 20kHz (+/-0.2dB)
Dynamic Range .............................................. 90dB, A-weighted
Signal-to-Noise Ratio...................................... -90dB, A-weighted
THD+N ........................................................... <0.0061% (-86dB)
Crosstalk......................................................... -85dB @ 1kHz
Input Impedance: Mic in ................................. 1.8K Ohms, typical
Adjustable Gain .............................................. +39dB
Inst Input:
Frequency Response ..................................... 22Hz to 20kHz (+/-0.2dB)
Dynamic Range .............................................. 90dB, A-weighted
Signal-to-Noise Ratio ..................................... -90dB, A-weighted
THD+N ........................................................... <0.0061% (-86dB)
Crosstalk......................................................... -75dB @ 1kHz
Input Impedance: Inst in ................................. 500K Ohms, typical;
Total Gain Range: ........................................... +38dB
Line Inputs (RCA IN, Unbalanced):
Frequency Response ..................................... 22Hz to 20kHz (+/-0.2dB)
Dynamic Range .............................................. 90dB, A-weighted
Signal-to-Noise Ratio...................................... -90dB, A-weighted
THD+N ........................................................... <0.003% (-86dB)
Crosstalk......................................................... -90dB @ 1kHz
Input Impedance ............................................. 10K Ohms, typical
Adjustable Gain .............................................. +8dB
Line Outputs 1/2 (Stereo, Unbalanced):
Frequency Response ..................................... 22Hz to 20kHz (+/-0.2dB)
Dynamic Range .............................................. 90dB, A-weighted
Signal-to-Noise Ratio...................................... -90dB, A-weighted
THD+N ........................................................... <0.003% (-86 dB)
Crosstalk......................................................... -90dB @ 1kHz
Nominal Output Level ..................................... Unbalanced: +2dBV, typical;
Headphone Outputs: (at Maximum Volume; Into 100 Ohm load):
Frequency Response ..................................... 22Hz to 20kHz (+/-0.2dB)
Power into Ohms ............................................ 20 mW into 100 Ohms
THD+N ........................................................... <0.06% (-66dB)
Signal-to-Noise Ratio...................................... -90dB, A-weighted
Max Output Level into 100 Ohms ................... +2.0dBV, typical
Load Impedance ............................................. 32 to 600 Ohms
17
Page 18
Services
If your UpodLive needs servicing, follow these instructions.
Check our online help centre at
knowledge, and downloads such as:
1. FAQ
2. Download
3. Learn More
4. Forum
Very often you will nd solutions on these pages. If you don’t nd a solution, create a
support ticket at our online ACS (Auto Customer Support) at the below link, and our
technical support team will assist you as soon as we can.
Navigate to
click “Submit a ticket” without the need to sign in.
As soon as you have submitted an enquiry ticket, our supporting team will assist you to
resolve the problem with your ICON ProAudio device as soon as possible.
To send defective products for service:
1. Ensure the problem is not related to operation error or external system devices.
2. Keep this owner's manual. We don't need it to repair the unit.
3. Pack the unit in its original packaging including end card and box. This is very
http://support.iconproaudio.com/hc/en-us
important. If you have lost the packaging, please make sure you have packed the
unit properly. ICON is not responsible for any damage that occurs due to non-factory
packing.
http://support.iconproaudio.com/hc/en-us
and then sign in to submit a ticket or
, for information,
4. Ship to the ICON Pro Audio tech support center or the local return authorization.
See our service centres and distributor service points at the link below:
If you are located in US
Send the product to:
North America
Mixware, LLC – U.S. Distributor
11070 Fleetwood Street – Unit F.
Sun Valley, CA 91352; USA
Tel.: (818) 578 4030
Contact: www.mixware.net/help
If you are located in Europe
Send the product to:
Sound Service
GmbHEuropean
HeadquarterMoriz-Seeler-Straße
3D-12489 Berlin
Telephone: +49 (0)30 707 130-0
Fax: +49 (0)30 707 130-189
E-Mail: info@sound-service.eu
5. For additional update information please visit our website at:
www.iconproaudio.com
If you are located in Hong Kong
Send the product to:
ASIA OFFICE:
Unit F, 15/F., Fu Cheung Centre,
No. 5-7 Wong Chuk Yueng Street,
Fotan,
Sha Tin, N.T., Hong Kong.
Page 19
天猫官方旗舰店
抖音号
哔哩哔哩
微信公众号
官方售后QQ
天猫店iconproaudio旗舰店
抖音iCON艾肯
B站iCONProAudio
中国地区用户
微信号iCON-PRO
Twier Instagram Facebook Youtube
www.twier.com/iconproaudio www.youtube.com/iconproaudiowww.instagram.com/iconproaudio www.facebook.com/iconproaudio
Website
www.iconproaudio.com
Support
support.iconproaudio.com
Dashboard
iconproaudio.com/dashboard/
4006311312.114.qq.com
Loading...