IP54/55 Dust-protection and
splash, water jet resistance
The IC-F3062 series meets IP54/55 requirements for dust-protection, splash and
water jet resistance. Its durable construction is backed up by the aluminum diecast chassis and polycarbonate casing,
allowing reliable operation under harsh
weather and environmental conditions.
Lithium-Ion battery pack
Supplied 2000mAh Li-Ion battery pack, BP232, provides 14 hours* of operating time.
Icom’s rugged dual-rail guide securely
locks the battery to the radio. Optional battery case BP-240
provides a convenient
back up and great reassurance in an
emergency.
* Typical operation Tx:Rx:Stand-by=5:5:90,
power save on
Most popular signalings built-in
The IC-F3062 series has built-in 2-Tone,
5-Tone, CTCSS and DTCS signaling capabilities as standard for group communication or selective calling. Also, the
IC-F3062 series can decode ten 2-Tone
codes or eight 5-Tone codes on a channel. When a matched tone is received, the
following actions are programmable for
each code.
• Beep sound • Bell icon
• Auto TX • Answer back call
• Stun/kill radio • Scan
Wide frequency range and
large channel capacity
The IC-F3062 series covers a wide frequency range in one version
(VHF 136–174
MHz, UHF 400–470MHz)
. The 512 memory
channel capacity with 128 zones allows
you to divide and store a variety of flexible
channel groupings. Memory channel selection can be made with a simple rotation
of the rotary channel knob. Wide, middle
and narrow channel bandwidth
(25/20/
12.5kHz)* is also programmable.
* Programmable 25/12.5kHz or 20/12.5kHz
Voting mode scanning
The Voting mode scanning detects the Smeter level of repeater stations and automatically selects the strongest station,
useful for roaming between 2 or more repeater sites. In addition, the IC-F3062 series has 10 scanning modes including
priority scan and double priority scan.