Icom IC-2720H User Manual 2
BUSY
MAIN
T X
MAIN
T X
M
M
Shows the current condition and “Si” indication alternately.
MUTE
BUSY
MAIN
T X
MAIN
T X
M
M
S/RF meter blinks (full-scale).
MUTE
Erratum for IC-2720H
Please note the following correction in the IC-2720H instruction manual page 21, ■ Audio mute function, and page 39, ■ Programming a call channel.
• WRONG
■ Audio mute function (page 21)
➥ Push [FUNC] then [
audio signals.
• Both the left and right bands S/RF meter blink in fullscale condition.
• Push [CLR A(MW)] (or any other key) to cancel the
function.
SQLY D(MUTE)] to mute
■ Programming a call channel
(page 39)
Operating frequency, duplex information, subaudible tone
information (tone encoder or tone squelch ON/OFF and its
frequency) and alphanumeric channel names can also be
programmed into the call channel.
• CORRECT
■ Audio mute function (page 21)
➥ Push [FUNC] then [
audio signals.
• The memory channel number indicator shows the
current condition and “Si” indications alternately.
• Push [CLR A(MW)] (or any other key) to cancel the
function.
SQLY D(MUTE)] to mute
■ Programming a call channel
(page 39)
Operating frequency, duplex information, subaudible tone
information (tone encoder or tone squelch ON/OFF and its
frequency) can be programmed into the call channel.
A-6124D-2EX
Loading...