Moon
User Guide
5
02
Contents
Page 03
Components
Page 04
Assembly: Parts & Opening the
Frame
Page 05
Assembly: Installing the Rear
Wheels
Page 06
Assembly: Installing the Front
Wheels & Using the Bumper Bar
Page 07
Assembly: Using the Harness &
Installing the Pram Hood
Page 08
Assembly: Preparing the Seat Unit
& Attaching Seat Unit to Pram
Page 09
Assembly: Converting Carrycot to
Seat Unit & Operating the Brakes
Page 10
Operating the Front Wheel
Lock & Seat Recline
Page 12
Warnings
IMPORTANT! READ THE INSTRUCTIONS CAREFULLY BEFORE USE
AND KEEP THEM FOR FUTURE REFERENCE. YOUR CHILDS SAFETY
MAY BE AFFECTED IF YOU DO NOT FOLLOW THESE INSTRUCTIONS.
WHEN YOU UNPACK THE STROLLER FROM THE CARTON BOX, PLEASE
REMOVE ALL PLASTIC BAGS AND SMALL ACCESSORIES AND KEEP THEM
AWAY FROM CHILDREN.
Page 11
Folding the Frame & Important
Safety Information
Components
03
1
2
3
5
6
7
8
Folding Button
Hood
Seat Recline
Bumper Bar
Bumper Bar Release
5 Point Safety Harness
1
2
3
7
6
4
10
Shopping Basket
* Not Pictured
8
4
Seat/Carrycot Removal
Button
11
Built in Suspension
12
Foam Filled Wheels
13
Brake
10
11
13
12
14
Footmu*
15
Raincover*
Seat Unit Toggle
9
9
Convertible Carrycot
& Seat Unit
Page 13
Warranty Information
Assembly - Parts
04 05
1. Chassis Frame
2. Seat Unit/Carrycot
3. Bumper Bar
4. Front Wheels
5. Rear Wheels
6. Rear Wheel Axle
& Break
9. Footmu
7. Rear Wheel
Hub Caps
8. Rear Wheel
Locking Caps
Assembly - Opening the Frame
1. Unhook the latch, located on
the right hand side of the frame
2. Lift the handlebar in the
direction of the arrow until the
frame locks into place.
Assembly - Installing the Rear Wheels
1. Insert the axle through each
rear wheel, with the axle going
through the break cluster on
the wheel first.
2. Fix the smallest locking cap
at the end of the axle to lock
the wheel on, then repeat with
the hub cap. Repeat this for
both wheels, ensuring both
sides are securely locked in
place.
3. Once the wheels are fixed
onto the axle, place the axle
onto the frame of the chassis.
Push it upwards until you hear a
‘click’ on both sides
4. To remove the rear wheel
axle, push both the metal push
pin clips inward, and slide
downwards until the axle is
clear of the chassis.
Loading...