Icidu Wireless 150N, 150 MBPS User Manual

BROADBAND ROUTER

WIRELESS 150N

150 MBPS

MANUAL NI-707517

CONTENTS OF THE PACKAGE 5

TECHNICAL SPECIFICATIONS 5

RANGE OF APPLICATIONS 5

HARDWARE INSTALLATION 6

ROUTER CONFIGURATION 8

WPS 14

CE/FCC 15

WARRANTY 18

3

ENGLISH

ENGLISH

CONTENTS OF THE PACKAGE

Before starting the installation fi rst check that all necessary
parts are present. The box should contain:

- Wireless Router 150N

- Power adapter 9V~ 850mA

- CD with full manual

- User manual

TECHNICAL SPECIFICATIONS

- 802.11n wireless protocol

- Supports: IEEE 803.3, IEEE 803.3u, IEEE 802.11b,
and IEEE 802.11g

- Supports: WEP/WPA/WPA2/802.1X data encryption

- Supports: 64/128/152 bit WEP encryption security

- Maximum wireless data transfer speed: 150Mbps

- Aerial 3dBi

- Web Based Management

- Supports: Dynamic IP, Static IP, PPPoE

- 1 x WAN, 4 x LAN RJ-45 UTP ports

- Built-in NAT and DHCP server

- Supports: VPN pass through

- Independent of operating system

RANGE OF APPLICATIONS

This router allows you to set up a wireless broadband Inter­net connection on multiple computers. On top of a shared
Internet connection, you can also set up a network between

Thank you for buying this 150N router. If you want to
interconnect several PC’s for shared Internet access,
you will need an additional component to connect
the PCs. This router allows you to set up a wireless
network, quickly and effi ciently.

BROADBAND ROUTER

WIRELESS 150N

150 MBPS

54

several PCs. Connect the ADSL modem to the WAN port of the
router and after a few seconds the WAN LED will light up.
You can now connect the PCs. Once the PCs have been
started up, the relevant LED will light up.

HARDWARE INSTALLATION

As soon as you have connected the router to the power
adapter, the power LED (Green) will light up and the link/act
LEDs will fl ash once. The other LEDs (Green) will light up as
soon as one of the UTP ports are connected to the computer.
When data is transferred from one computer to another the
LEDs will start to fl ash.

LED INDICATORS

OVERVIEW OF CONNECTIONS AT THE BACK OF THE ROUTER

Name LED Action Description

OFF No Power
ON Power ON
ON Router is starting up
Flashing Router is ready to use
OFF Hardware Error (reset the router)
OFF Wireless connection is disabled
Flashing Wireless connection is enabled
OFF

There is no network connection between computer and router

ON

There is a network connection between computer and router
Flashing There is data activity on the network
Flashing1 Wireless connection is enabled
Flashing2 Error
On There is a network connection

PWR

SYS

WLAN

WAN, 1-4

WPS

76