icetro SSM-180, SSM-280, SSM- 420, SSM- 52, SSM- 560 User Manual

Slush & Smoothie Machine User Manual
SSM-180, 280, 420, 560, 52(MINI)
·The product has been designed for indoor use only. So do not use it outdoors.
·Before use of the product, be sure to become familiar with this manual. Keep the manual in a convenient place for quick and easy reference.
·This manual contains the product warranty card.
without prior notice.
2
Contents
1.Names of Parts 3~7
2.Overview 8
3.Safety Signs, Symbols, and Labels 8
4.Safety Instructions 9
5.Installation Requirements 10
6.Safety Cautions for Operation 11
7.Operation Procedure 12~19
7.1 Controllers
7.2 Operations
7.3 Cleaning and sterilization procedure
7.3.1 Disassembling the product
7.3.2 Cleaning the product
7.3.3 Sterilizing the product
7.3.4 Assembling the product
7.3.5 Sterilizing the site
8.Daily Check 20
8.1 Repairing the product (by qualified engineer only)
9.Specifications 21
10.Circuit Diagram 22~23
11.Before Calling Service 24
12.Part List 25~33
13.When Receiving Service 34
Product Warranty Card 35
- Keep the manual in a convenient place for quick and easy reference. -
1. Names of Parts
Exterior and parts
MODEL : SSM-52
3
4
MODEL : SSM-180
5
MODEL : SSM-280
6
MODEL : SSM-420
7
MODEL : SSM-560
󱄿 SSM-52 : See the part list.
8
The warnings and safety instructions in this manual do not cover all possible conditions and situations. While operating, moving or cleaning this product, manipulate it carefully based on common sense. If a bad and non-understandable symptom happens, feel free to contact the purchased site or service agency.
If you neglect this symbol and wrongly use the product, it may cause death or serious injury.
This is the safety warning symbol. It is used to warn users of any potential risk of injuries. To evade from the risk of injury or death, comply with the safety requirements for the symbol.
Danger
Warning
Caution
Caution
If you neglect this symbol and wrongly use the product, it may cause a potential risk of death or serious injury.
If you neglect this symbol and wrongly use the product, it may cause a potential risk of injury.
If you neglect this with no caution symbol and wrongly use the product, it may cause a potential risk of property damage.
Important
You must check the electrical rating on the nameplate of the product. The nameplate is attached on the rear of the product. The nameplate specification has priority over information in this manual. The electric circuit diagram of the product is attached inside of the panel. In addition, the product specification is subject to change without prior notice.
2.Overview
To become familiar with this product, be sure to read this manual carefully. This product requires cleaning and maintenance activities as in other machines. Any disassembly or cleaning mistakes may cause a product failure. It is highly recommended for the person in charge to have immersion training for activities.
3.Safety Signs, Symbols, and Labels
9
4.Safety Instructions
Be sure to use the grounded consent.
It may cause a failure or electric shock.
Do not move the product by pulling the power plug.
It may cause a failure or electric shock.
Do not forcibly bend the power plug or place any heavy material on it.
It may cause an electric shock or fire.
Remove water or dust from the power plug and insert it fully into the outlet.
It may cause a fire or electric shock.
Do not contact the power plug with wet hands.
It may cause an electric shock or fire.
When the power plug is removed from the outlet, insert it after 5 minutes.
Otherwise, It may cause a product failure.
When repairing the product or replacing the parts, remove the power plug from the outlet.
It may cause an electric shock or fire.
Do not pull off the power plug.
It may cause a failure or electric shock.
Do not connect multiple products to a single outlet.
It may cause a fire.
When not using the product for a long time, remove the power plug from the outlet.
It may cause an electric shock or fire.
Do not connect the power plug arbitrarily or nor modify it.
It may cause an electric shock or fire.
When the power plug is damaged, do not replace it arbitrarily and contact the service agency.
It may cause an electric shock or fire.
Caution!
Use this product as described in the user manual.
- If you do not follow the instructions, it may cause an electric shock or property loss.
- When transferring the product to another person, transfer the user manual also.
- Before supplying power, check whether the voltage is the same as the one of the nameplate.
According to applicable electric code regulations and machine specifications, ground the product and connect to the single phase power. If the product has no plug, install the grounded plug to meet at least 15 A 250 V (220 to 230 V, 50 to 60 Hz). For directly connecting the product to the main power, connect the power cord to the 2 pole circuit breaker. Never use the extension cord with no grounding.
10
5. Installation Requirements
Do not install the product near the heat generating source.
It may cause a fire.
Do not install the product in a humid, dusty, or water (e.g. rain) splashing place.
It may cause an electric shock or fire.
Do not install the product near combustible gases or inflammable materials.
It may cause a fire.
When moving the product, be careful not to slip and fall.
It may cause an injury or product damage.
Do not forcibly apply force or shock to the product.
It may cause damage to the product.
This product is for indoor use only. So install the product inside the house.
Caution!
This product is for indoor use only. So do not install the product outdoors. Inevitably, when the product is installed outside, prepare a shade to block direct sunlight, rain, wind, and dust for sanitary control and optimal performance. Install the product in the place where you can easily manage it to prevent robbery and loss by dangerous play.
Keep at least 30 cm distance for the side and rear of the product.
Do not install the product on a weak or uneven floor.
It may cause vibration and noise.
Adjust the vertical balance of the product not to shake and then adjust the horizontal balance.
Firmly fix the product.
The drain hose is located on the top of the drain box.
Check any damage of the product.
If found, contact the delivery agency to request claims on it.
11
6.Safety Cautions for Operation
Keep away any flammable materials.
It may cause a fire or explosion
due to electric spark.
If the product makes heavy noise or does not operate properly, remove the power plug and contact the service agency.
It may cause an electric shock or fire.
Do not use any flammable spray such as pesticide and air freshener.
It may cause a fire.
Check the supplied power.
When the PVC coating of the power
cable is stripped off or the shunt
socket is used, it may cause a fire.
Operate the product in a non­humid place.
In a humid place, the product
easily gets rusty or has an electric leak.
If the floor gets humid, wipe it with
soft cloth.
Do not use the product in the ambient temperature of 5or below for a long time.
It may cause a product failure.
Use the product in a well vented place.
Gas or smoke can discolor the
surface of the product.
Do not spray water and wipe the product with a clean wet towel.
If you directly spray water,
it may cause an electric leak or product failure.
Be cautioned of gases!
When gas leak happens, do not
touch the product.
If you open the door or remove
the power plug, it may cause an explosion due to spark.
Do not touch the product.Fully close the gas burner.Open the window for ventilation.
For food sanitation, clean and sterilize the product every day
Before cleaning, remove the
power plug from the outlet.
Do not forcibly apply force to the slush supply lever nor hang on it.
It may cause damage to the
product.
Do not insert your finger or other materials into the panel rubber or the slush supply.
Do not operate the product while all panels are not well fastened enough.
When the product is not separated from the power supply, do not clean the product nor remove the canister, spiral or panel.
Caution
While operating the product, do not hold the product using the canister or evaporator drum. The manufacturer assumes no responsibility for any damage caused by careless handling.
Loading...
+ 25 hidden pages