icetro IIS-320SA, WC-0700-AS User Manual

MODEL : IIS-320SA / WC-0700-AS

SNOW ICE MAKER

USER MANUAL

※ This machine cannot be used in any other country where the electric
voltage for its power supply is not available.
※ This product is designed for indoor installation.
Please be sure to install it indoors.
※ The external appearance, design, color, and/or components of this machine
may be changed without prior notice for the sake of the Company's product
manufacture.
※ For maximum hygiene, be sure to clean and sterilize the product
on a daily basis.

2

We Think of Customer Satisfaction

INDEX

1. Preparations for safety

3~7

15~16

8

18~24

17

25~26

27~29

30

9~14

4. Part names

2. Installation and other information

6. Operation specifications and how to use

5. Specification

3. How to install

7. How to wash

- Disassembling and washing

- Sterilizing and second washing

- Washing and cleaning

- Keep this user manual within your reach and view at all times -

3

1. Preparations for safety

Failure to follow these instructions may result in severe personal injury or death.

SHOULD BE DONE PROHIBITION GROUNDEDDO NOT

DISASSEMBLE

DO NOT

TOUCH

DISCONNECT

POWER PLUG

Failure to follow these instructions may result in parts replacement expense and /
or service repair expense.

◆ An electrical fire may be caused by a receptacle holding
more than one item.

◆ A fire may occur if plug is not clean.

◆ Do not use an adapter or an extension cord.

Clean the plug, if covered in foreign material or dust etc.
with a clean, dry towel.

Use a single receptacle for the ice machine.

Clean the plug

Warning

Caution

Warning

4

We Think of Customer Satisfaction

Warning

◆ Damage by excessive weight can cause the unit to overheat
and/or fire.

◆ Lack of insulation causes an electric leakage, shock and fire.

◆ Operating the product under bad conditions may cause fire
or electric shock.

◆ An electric short or fire can occur.

◆ It may cause explosion and fire.

Do not place or store heavy items or the top
of the product.

Do not install the machine under humidity area or
near the area where water could spatter.

Stop operation
When the smell of burning or smoke is emitted
from the machine, or if the product malfunctions,
immediately unplug the product and stop operation.

Prohibition of use:
Replace or tighten the receptacle if it is loose.

Prohibition of use:
Do not use flammable gas near the icemaker.

5

Warning

◆ It may cause the fire or extraordinary operation, and would result
in the serious problem.

◆ Injury to the child or damage to the icemaker may occur.

◆ Let them avoid hanging onto the front door of the model when it is open.

◆ It may cause an electric shock.

◆ It may cause the damage of colling system ice storage part
or electrocution.

◆ There is a danger of a current leak, electric shock and/or fire

◆ Be sure to contact the customer service center if the power cord
or plug gets peeled or damaged.

Do not disassemble
Do not modify the parts of icemaker, and repair
without an authorized person

Prohibition
Do not let children hang on the door of the icemaker.

Do not touch
Do not touch or disconnect the power cord
with wet hands.

Do not touch
Do not clean the inside the ice maker with sharp tools.

Prohibition

Do not bend the power cord severely, or allow it to be
pressed by a heavy matter, which can cause damage
to the cord.

6

We Think of Customer Satisfaction

Warning

Power strip use
Make sure the power strip supports higher power
than 250V and 16A.

◆ It may cause electric shock, fire, or injury.

◆ Pulling the power cord or using a screwdriver to unplug may
cause fire or electric sparks.

◆ An ungrounded circuit may cause product failure or
an electric shock.

◆ Using multiple appliances on one power strip may cause fire.
Thus, be sure to plug only one appliance especially when using
this product.

Disconnect power plug

For long term usage interruption or product shut-down,
close the water supply valve, remove the ice from the
product and unplug the power cord.

Disconnect power plug
Unplug the power cord first when cleaning
or servicing.

Disconnect power plug
Separate the power plug from the receptacle
with holding the plug body.

Grounded
The Ice Machine must be connected to a GFCI
receptacle or a GFCI circuit

7

Caution

◆ Be sure to refer to the user manual for the safest usage
by users who are not familiar with the product.

◆ Slipping and hitting the ice maker or sticking one's hand or foot
into the bottom will cause injury.

◆ The bottom of this product has various parts including
metal sheet, which may cause injury.

◆ Plugging in right away may cause overload and malfunction.

Caution
Remove any moisture oil, anything that may
cause slipping on the ground near the product.

Hand over
As you turn over the icemaker to the other user,
please turn over the operation manual together.

Do not slide hands or feet in under the icemaker.

When reconnecting the power cord after disconnection,
wait at least 5 minutes before reconnecting.

This product senses ice with voltage (resistance); since ice made of distilled
water may not be recognized, tap water is highly recommended.

8

We Think of Customer Satisfaction

2. Installation and other information

Be sure to fix the product securely as in the figure at your preferred location.
Otherwise, the manufacturer is not liable for any incident or injury resulting
from the fall of the product while in use.

< Fixing the product >

1. Check the break on the bottom wheel.

2. Secure the product and rotate the break
clockwise. The product will not budge
if the break is working fine.
Turn the break counterclockwise
to move the product.

[ To fix on the surface ]

[ To move the product ]

9

3. How to install

1. In the rightmost part of the back of the product
is the power line, which can be connected to
a power source.

2. Fully tighten the socket on the water supply
part at the back before connecting
the water hose.

Water supply part

Water hose

Socket

3. In the leftmost part of the back of
the product is the water supply line
for washing the product.

4. This product has a separate water supply
line at the front, which is not embedded and
can be opened or closed anytime for cleaning.
(The drain plug has to be in place normally.)

Water supply line

Drain line

Drain hose

Drain plug

Power line

◆ If necessary, a drain hose can be connected,
and you can plug the end of the drain hose.

Milk supply
hose

Caution

: If having trouble with the flow of raw material
after long pause of use, the milk supply hose
could have been adhered.
Please press the button 'VALVE' to operate
the pinch valve (OPEN) and move the hose
from side to side to release the adhesion.

10

We Think of Customer Satisfaction

3. How to install

Suitable installation condition and place

⊙ Places without heat sources

◆

The product has to be installed at places without a heat

source such as stove or gas range or any place that is out
of the range of the ambient temperature (10 ~ 38℃,
50~100℉).

⊙ Places with enough spaces from the walls

◆

The minimum distance required is 20cm(8") from the

walls for normal operation.

⊙ Places with good ventilation

◆

Inadequate ventilation will lead to poor

ice-making capability

◆

Installing the product on an uneven surface may
cause it to fall or slip and cause injury.
Make sure that the product is installed on
an even surface.

Caution : When installed on an uneven surface,
the ingredient in the drum gutter
may overflow.

⊙ On even surfaces

◆

Uneven surface will result in too much vibration or noise.

(The surface angle must be less than 1˚)

Walls

20cm(8")

Rear side
of ice
making
system

Optimal

Temperature