Ice-O-Matic ICEU226FW, ICEU220HW, ICEU150HW User Manual
Service Bulletin
SUBJECT: ICEU150/220 SERIES EXPANSION VALVE CHANGE Number: 09-04
Product: Cuber
A change has been implemented regarding the expansion valve on the ICEU150/220 ICE™ Series cube ice machines.
Ice-O-Matic is now utilizing a Danfoss manufactured valve, which will replace the Alco manufactured valve. This supplier
change was implemented in April 2009, and will affect units manufactured beginning with serial numbers listed below.
Model Number Date of Change Serial Number Part Number Manufacture
ICEU150 A/W April 22, 2009 09041280011029 9151157-01 Danfoss
ICEU220/5/6 A/W April 29, 2009 09041280011542 9151156-01 Danfoss
This Danfoss manufactured expansion valve can replace any Alco manufactured expansion valve used on the
ICEU150/220/225/226 A/W cubers.
Model Number Alco Valve Part Number Replacement Danfoss Valve Part Number
ICEU150 A/W 9151134-03 9151157-01
ICEU220 A/W 9151134-07 9151156-01
ICEU225 A/W 9151134-07 9151156-01
ICEU226 A/W 9151134-07 9151156-01
Installation Note: The new Danfoss TXV utilizes a stainless steel bulb. When installing a replacement Danfoss TXV
valve, the bulb must be installed with the proper clamp and as tightly as possible to insure proper performance.
Date Issued: May 2009
From: Technical Service
If you have any questions, please contact the Ice-O-Matic Service Department at 1-800-423-3367
Loading...