Ice-O-Matic ICE1506 User Manual
®
ICE 1506 Series
Cube ICE Maker
✓ Produces up to 1431 lbs. (650 Kgs.)* of ICE per day
✓ Constructed from sturdy, corrosion-resistant
300 series stainless steel
✓ Only 30” wide
✓ Available with a remote condenser
ICE 1506 on a
Beverage Dispenser
ICE-O-Matic® is the Best ICE Making Solution for:
Hard Water, Food Safety and Tight Spaces
Problem
Food Safety
Food safety concerns about slime- and
odor-causing bacteria
Hard Water
Scaling due to hard water slows ICE
Making production
-
PURE ICE
Built-in antimicrobial protection for the life of the machine
prevents bacteria and slime fungus growth. ICE-O-Matic’s®
optional water filteration system provides protection
against unpleasant tastes, odors and scale formation.
Harvest Assist
Provides consistent ICE production 24/7 for the life of the
machine, while reducing operating costs
®
Solution
Exclusively by ICE-O-Matic
®
Corrosion
Salt air corrosion of outdoor equipment
located in coastal regions
Dirty Air Filter
Forget to change the air filter?
*Rated at 70 °Air / 50° Water
Sea Salt Corrosion Proctection
All remote condensers are coated with a salt air corrosion
protection – FREE
Filter-Free Air
No air filter to change
Dimensions
®
30”
(762 mm)
Ice Cube Dispense Area
Top View
2 x 4.50
6.00
Minimum Wall Clearance
28 1/2”
(724 mm)
22”
(589 mm)
R.H. Side View
7/8" Holes For Electrical
Connections
Ice Maker Potable
Water In 3/8" FPT
Ice Maker Water
Out 3/4" FPT
25.61
28.36
2.41
11.58
1.09
5.12
10.06
13.06
15.56
22.06
30.28
Rear of Machine
20.00
Ice Cube Dispense Area
2 x 19.50
2 x 3.29
2 x 1.10
2 x 1.10
2 x 2.00
Rear of Machine
Discharge Line 1/2" Male Quick Connect Coupling For
Use With RT-325-404 or RT-340-404 Precharge Line Set
Liquid Line 3/8" Male Quick Connect Coupling For
Use With RT-325-404 or RT-340-404 Precharge Line Set
22.05
Hardware For Strap
Mounting To Bin Located
Underside Of Ice Maker
Ice Maker Potable
Water In 3/8"
Ice Maker Potable Water In 3/8"
(Optional)
Ice Maker Water Out 3/4" FPT
(Optional)
ICE PRODUCTION CHART POUNDS
(KILOGR
AMS) PER
24 HOURS
ICE 1506
Conds. Air Temp. Water Temp. °F (°C)
Unit °F (°C) 80°(27°) 70°(21°) 50°(10°)
Remote
90° (32°) 1118 (508) 1202 (546) 1294 (588)
Cooled
80° (27°) 1152 (523) 1238 (563) 1362 (619)
70° (21°) 1210 (550) 1301 (591) 1431 (650)
1. 90°/70° figures are rated in accordance with
ARI Standard 810. All remaining points are
mathematical estimates.
2. All specifications and performance data are
subject to normal manufacturing variances.
Ambient Temp. Range
Remote -20° - 120°F (-29° - 49°C) 60Hz
Water Temp. Range 40° - 80°F (4.5° - 27°C)
Water Pressure ICE Maker Min. 20 psi (1.4 bar)
Water in Max. 60 psi (6.9 bar)
The ICE 1506 must be ordered with the LRC 2661
Remote Condenser. The ERC 2661 is not compatible.
OPERATING LIMITS
NOTES
7/8" x 7/8" x 3/8"
(22mm x 22mm x 10mm)
7/8" x 7/8" x 7/8"
(22mm x 22mm x 22mm)
ORDERING AND SPECIFICATION INFORMATION
Water Used-Gals. (Lits.) Kilowatts
ICE Production ICE Production per 100 lbs. of ICE Used per
per 24 hrs. at per 24 hrs. at 90° Air/70° Water 100 lbs. of Ice Min. Max. Shipping
Model Cond. 70° Air/50° Water 90° Air/70° Water 90° Air Voltage No. of Circuit Fuse Weight
No. Unit lbs. (Kgs.) lbs. (Kgs.) 70° Water Btuh Characteristics Wires Amp. Size lbs. (Kgs.)
ICE 1506HR Remote 1431 (650) 1202 (546) 20.26 (76) n/a 5.5 20050 208-230/60/1 3 27.4 30 300 (136)
LRC-2661 Remote Condenser for 1 model ICE 1506R (208-230/60/1 voltage) 100 (46)
60 Hz
RT-325-404 25 ft. (7.6m) Precharged Tubing Kit for R-404A models 13 (6)
RT-340-404 40 ft. (12m) Precharged Tubing Kit for R-404A models 18 (8)
RT-345-404 45 ft. (13.7m) Precharged Tubing Kit for R-404A models 19 (9)
RT-360-404 60 ft. (18.2m) Precharged Tubing Kit for R-404A models 23 (12)
ICE Prod. Cond.
Use Use
Half Cube
Full Cube
9
0
O
0
S
1
I
C
D
E
E
R
I
T
F
I
We reserve the right to make changes in design and construction at any time
without obligation.
2004© ICE-O-Matic Rev Code: 1019B-05/04-SS
ICE-O-Matic 11100 E. 45th Avenue, Denver, CO 80239
Tel. 303 371-3737 Fax. 303 371-6296 www.iceomatic.com
Loading...