Ice-O-Matic EMF 800 User Manual
®
EMF 800 Series
Flake ICE Maker
EMF 800 on a B55 Bin
ICE-O-Matic®is the Best ICE Making Solution for:
Hard Water, Food Safety and Tight Spaces
✓
Produces up to 852 lbs. (387 Kgs.)* of ICE per day
✓
Constructed from sturdy, corrosion-resistant
300 series stainless steel
✓
Only 16 inches wide
✓
Available with an air-or water-cooled condenser
*Rated at 70 ° (21°) Air / 50° (10°) Water
Problem
ICE-O-Matic®Tough
Constructed with a brass evaporator and rugged stainless
steel transport system enclosed in polyurethane insulation
Solution
Operating Environments
Built to last?
Tight-Fitting Spaces
Kitchen space utilization
Maximum ICE
Maximum ICE production in a minimum amount of space :
• Maximum ICE production in a 16 inch wide cabinet
• Maximum ICE production in a 115 volt ICE Maker
• Works on all industry dispensers and bins
Dirty Air Filter
Forget to change the air filter?
Filter-Free Air
No air filter to change
Dependable ICE
ICE-O-Matic Flake ICE Makers remove excess water by
pushing the flaked ICE through an extrusion process.
The result is high quality flaked ICE which is ideal for
medical, supermaket or restaurant applications.
Poor Ice Quality
Ice is too wet and soft
Dimensions and Air Flow
Air Out -
Both Sides
of ICE Maker
16"
(406 mm)
82"
(2083 mm)
Air in -
Front of
of ICE Maker
23.5"
(597 mm)
32"
(813 mm)
31"
(787 mm)
30"
(762 mm)
EMF 800 EMF 705
Conds. Air Temp. Water Temp. °F (°C) Air Temp. Water Temp. °F (°C)
Unit °F (°C) 80°(27°) 70°(21°) 50°(10°) °F (°C) 80°(27°) 70°(21°) 50°(10°)
90° (32°) 588 (267) 632 (287) 691 (314) 90° (32°) 568 (258) 641 (291) 625 (284)
80° (27°) 622 (283) 669 (304) 736 (334) 80° (27°) 613 (278) 692 (314) 723 (328)
70° (21°) 659 (300) 709 (322) 780 (355) 70° (21°) 662 (301) 748 (339) 821 (373)
90° (32°) 703 (320) 756 (344) 794 (361)
80° (27°) 696 (316) 748 (340) 823 (374)
70° (21°) 720 (327) 774 (352) 852 (387)
All specifications and performance data are
subject to normal manufacturing variances.
ICE PRODUCTION CHART POUNDS (KILOGRAMS) PER 24 HOURS
Air
Cooled
Water
Cooled
EMF 800 Series Flake ICE Maker - Modular
OPERATING LIMITS
Ambient Temp. Range
Air & Water 50° - 104°F (10° - 40°C) 60Hz
50° - 110°F (10° - 43°C) 50Hz
Water Temp. Range 40° - 80°F (4.5° - 27°C)
Water Pressure Ice Maker Min. 20 psi (1.4 bar)
Water in Max. 60 psi (6.9 bar)
Condenser Inlet Water Min. 20 psi (1.4 bar)
(Water cooled only) Max. 60 psi (6.9 bar)
We reserve the right to make changes in design and construction at any time
without obligation.
2003© ICE-O-Matic Rev Code: 2005A-07/03-SS
ICE-O-Matic 11100 E. 45th Avenue, Denver, CO 80239
Tel. 303 371-3737 Fax. 303 371-6296 www.iceomatic.com
®
EMF800AS Air 780 (355) 632 (287) 12.0 (45) n/a 4.3 7693 115/60/1 3 19.8 20 205 (93)
EMF800WS Water 852 (387) 756 (344) 12.0 (45) 146.6 (555) 3.2 8261 115/60/1 3 16.5 20 205 (93)
EMF705AS Air 821 (373) 641 (291) 12.0 (45) n/a 4.1 5170 220-240/50/1 3 8.6 15 205 (93)
See Bin specification sheet for information on ICE storage bins
Please note: air-cooled units require 6” (152 mm) clearance for air intake and exhaust.
Water Used-Gals. (Lits.) Kilowatts
ICE Production ICE Production per 100 lbs. of ICE Used per
per 24 hrs. at per 24 hrs. at 90° Air/70° Water 100 lbs. of ICE Min. Max. Shipping
Model Cond. 70° Air/50° Water 90° Air/70° Water 90° Air Voltage No. of Circuit Fuse Weight
No. Unit lbs. (Kgs.) lbs. (Kgs.) 70° Water Btuh Characteristics Wires Amp. Size lbs. (Kgs.)
ICE Prod. Cond.
Use Use
60 Hz
50 Hz
ORDERING AND SPECIFICATION INFORMATION
4.50" (114mm)
ICE Dispense Area
"To Bin" in Bottom
of Machine-5.50"
(140mm) DIA
4.00"
(102mm)
TOP VIEW
Condenser Water Out
3/8" (10mm) Copper Tubing
Water Cooled Only
16.00"
(406mm)
1.88"
6.38"
(162mm)
(48mm)
1.38" (35mm)
2.25" (57mm)
3.88" (99mm)
7/8" (22mm) DIA Hole
for Electrical
Connection to
Control Box
ICE Maker Water Out
1/2" (13mm) I.D.
Plastic Tubing
Condenser Water In
3/8" (10mm) Copper Tubing
Water Cooled Only
REAR VIEW
21.88"
(556mm)
ICE Maker Water In
1/4" (6mm) Male Flare
29.75"
(756mm)
9
0
O
0
S
1
I
À
C
D
E
E
R
I
T
F
I
Loading...