Ice-O-Matic EMF 2306 User Manual

EMF 2306 Series Flake ICE Maker

EMF 2306 on a B100 Bin

ICE-O-Matic®is the Best ICE Making Solution for:

Hard Water, Food Safety and Tight Spaces

✓ Produces up to 2624 lbs. (1193 Kgs.)* of ICE per day ✓ Constructed from sturdy, corrosion-resistant

300 series stainless steel

✓ Only 26 inches tall ✓ Available with an air-or water-or

remote-cooled condenser

*Rated at 70 ° (21°) Air / 50° (10°) Water

Problem

ICE-O-Matic®Tough

Constructed with a brass evaporator and rugged stainless steel transport system enclosed in polyurethane insulation

Solution

Operating Environments

Built to last?

Tight-Fitting Spaces

Kitchen space utilization

Maximum ICE

Maximum ICE production in a minimum amount of space with an ultra-low profile:

• 26 inches tall

• Maximum ICE production in a 48 inch wide cabinet

• Works on all industry dispensers and bins

Dirty Air Filter

Forget to change the air filter?

Filter-Free Air

No air filter to change

Dependable ICE

ICE-O-Matic Flake ICE Makers remove excess water by pushing the flaked ICE through an extrusion process. The result is high quality flaked ICE which is ideal for medical, supermaket or restaurant applications.

Poor Ice Quality

Ice is too wet and soft

EMF 2306 Series Flake ICE Maker - Modular

We reserve the right to make changes in design and construction at any time without obligation. 2003© ICE-O-Matic Rev Code: 2007A-07/03-SS

ICE-O-Matic 11100 E. 45th Avenue, Denver, CO 80239

Tel. 303 371-3737 Fax. 303 371-6296 www.iceomatic.com

Air Out -

Both Sides

of ICE Maker

Air in Back of

of ICE Maker

Dimensions and Air Flow

Air Out -

Both Sides

of ICE Maker

24"

(610 mm)

76"

(1930 mm)

26"

(660 mm)

48"

(1219 mm)

31"

(787 mm)

EMF 2306

Conds. Air Temp. Water Temp. °F (°C) Unit °F (°C) 80°(27°) 70°(21°) 50°(10°)

90° (32°) 1681 (764) 1808 (822) 1986 (903) 90° (32°) 1730 (786) 1860 (845) 2066 (939)

80° (27°) 1791 (814) 1926 (875) 2119 (963) 80° (27°) 1878 (854) 2019 (918) 2221 (1010)

70° (21°) 1904 (865) 2047 (930) 2252 (1024) 70° (21°) 2009 (913) 2160 (982) 2376 (1080)

90° (32°) 2068 (940) 2224 (1011) 2384 (1084) 90° (32°) 1968 (894) 2116 (962) 2254 (1024)

80° (27°) 2117 (962) 2276 (1035) 2504 (1138) 80° (27°) 1992 (906) 2142 (974) 2357 (1071)

70° (21°) 2218 (1008) 2385 (1084) 2624 (1193) 70° (21°) 2080 (945) 2236 (1016) 2460 (1118)

90° (32°) 1700 (773) 1828 (831) 2047 (931)

80° (27°) 1870 (850) 2010 (914) 2212 (1005)

70° (21°) 2009 (913) 2160 (982) 2376 (1080)

50° (10°) 2424 (1102)

30° (-1°) 2472 (1124)

0° (-18°) 2521 (1146

)

All specifications and performance data are subject to normal manufacturing variances.

Air

Cooled

Water

Cooled

Remote

Cooled

OPERATING LIMITS

Ambient Temp. Range Air & Water 50° - 104°F (10° - 40°C) 60Hz

50° - 110°F (10° - 43°C) 50Hz

Remote -20° - 120°F (-29° - 49°C) 60Hz

-20° - 110°F (-29° - 43°C) 50 Hz

Water Temp. Range 40° - 80°F (4.5° - 27°C)

Water Pressure Ice Maker Min. 20 psi (1.4 bar) Water in Max. 60 psi (6.9 bar)

Condenser Inlet Water Min. 20 psi (1.4 bar) (Water cooled only) Max. 60 psi (6.9 bar)

EMF2306AS Air 2252 (1024) 1808 (822) 12.0 (45) n/a 3.0 18978 208-230/60/1 3 14.9 15 370 (168)

EMF2306WS Water 2624 (1193) 2224 (1011) 12.0 (45) 182.8 (692) 2.2 21600 208-230/60/1 3 12.8 15 370 (168)

EMF2306RS Remote 2376 (1080) 1828 (831) 12.0 (45) n/a 3.1 19194 208-230/60/1 3 15.5 15 370 (168)

ERC -2062 Remote Condenser for 1 model EMF 2306RS (208-230/50-60/1 voltage) 125 (57)

RT-325-404 25 ft. (7.6m) Precharged Tubing Kit for R-404A models 13 (6)

RT-340-404 40 ft. (12m) Precharged Tubing Kit for R-404A models 18 (8)

RT-345-404 45 ft. (13.7m) Precharged Tubing Kit for R-404A models 19 (9)

RT-360-404 60 ft. (18.2m) Precharged Tubing Kit for R-404A models 26 (12)

See Bin specification sheet for information on ICE storage bins

Please note: air-cooled units require 6” (152 mm) clearance for air intake and exhaust.

Water Used-Gals. (Lits.) Kilowatts

ICEProduction ICE Production per 100 lbs. of Ice Used per

per 24 hrs. at per 24 hrs. at 90° Air/70° Water 100 lbs. of ICES Min. Max. Shipping

Model Cond. 70° Air/50° Water 90° Air/70° Water 90° Air Voltage No. of Circuit Fuse Weight

No. Unit lbs. (Kgs.) lbs. (Kgs.) 70° Water Btuh Characteristics Wires Amp. Size lbs. (Kgs.)

ICE Prod. Cond.

Use Use

60 Hz

ORDERING AND SPECIFICATION INFORMATION

ICE PRODUCTION CHART POUNDS

(KILOGRAMS) PER 24 HOURS

20.95"

(532mm)

TYP.

0.75" (19mm) TYP.

23.50"

(597mm)

0.75"

(19mm)

TYP.

9.00"

(229mm)

Hole for Strap

Mounting to Bin

ICE Maker - Water In 1/4" (6mm) Male Flare

ICE Machine - Water Out 9/16" (14mm) ID Plastic Tubing

0.50"

(13mm)

TYP.

9.00"

(229mm)

19.45"

(494mm)

TYP.

7/8" (22mm) DIA Hole for Electrical Connections to Control Box

7/8" (22mm) DIA Hole for Electrical Connections to Control Box for Remote Condenser Fan Leads

Rear View

(Air Cooled)

20.95"

(532mm)

TYP.

0.75" (19mm) TYP.

23.50"

(597mm)

0.75"

(19mm)

TYP.

9.00"

(229mm)

Hole for Strap

Mounting to Bin

ICE Maker - Water In 1/4" (6mm) Male Flare

ICE Machine - Water Out 9/16" (14mm) ID Plastic Tubing

0.50"

(13mm)

TYP.

9.00"

(229mm)

19.45"

(494mm)

TYP.

7/8" (22mm) DIA Hole for Electrical Connections to Control Box

7/8" (22mm) DIA Hole for Electrical Connections to Control Box for Remote Condenser Fan Leads

Rear View

(Air Cooled)

4.00" (102mm) TYP. Minimum Wall

Clearance

ICE Dispense Area "To Bin"

in Bottom of Machine

- 5.50" (140mm)

48.00" (1219mm)

Top View

11.41"

(290mm)

5.50"

(140mm)

TYP.

6.00"

(152mm)

Minimum Wall Clearance for Utility Connections

26.00"

(660mm)

Air Flow "Out"

23.64"

(600mm)

R.H. Side View

ﬁ