Ice-O-Matic 40030 User Manual

CD 40030 Series Hotel Dispenser

CD 40030

✓ Stores 180 lbs. (81 Kgs.) of ICE ✓ Constructed from sturdy, corrosion-resistant

300 series stainless steel

✓ Only 30 inches (762 mm) wide ✓ Available with water glass filler and

coin/token options

ICE-O-Matic®is the Best ICE Making Solution for:

Hard Water, Food Safety and Tight Spaces

Problem

Power Clean

Allows access to the bin for easy cleaning without moving the ICE machine. Interlock safety switch turns off machine agitation when top-front access panel is removed.

Simple Operation

• Turbo Dispense - dispenses a 1/4 lb. of ICE per second

• Push to Dispense - user friendly dispensing

• Smudge Proof Finish - prevents fingerprints and smudges

Solution

Hard To Clean

Ice machine must be lifted off of other dispensers for cleaning

Difficult Dispensing

Ice is sometimes slow and difficult to dispense

Ice Melts Too Fast

Inadequate storage insulation causes Ice to melt too quickly

Maximum Preservation

Hotel Dispenser is insulated with an average of 4 inches of foam for maximum ICE preservation

Tight-Fitting Spaces

Vending area utilization

Maximum ICE

Maximum ICE storage in a minimum amount of space with an ultra-low profile

Dimensions and Air Flow

CD 40030 Push 180 (81) 115/60/1 2 2.1 15 220 (99) CD 40130 Push / Water 180 (81) 115/60/1 2 2.1 15 224 (101) CD 40230 Coin/Token 180 (81) 115/60/1 2 2.1 15 220 (99) CD 40530 Push 180 (81) 230/50/1 2 2.1 15 220 (99)

Note #1: Model CD40030 and CD40530 dispensers accept all 30” ICE Series™ Cube ICE Makers

Note #2: Water dispensers and coin / token mechanisms cannot be field installed on the CD 400 Series Dispensers

Note #3: CD400 Series Dispensers cannot have a water dispenser and coin / token mechanism on the same machine

Note #4: CD40030 and CD40530 Series units do not require an Adaptor and Bin Level Kit

Options:

TKNS: 500 tokens for use with CD40230, 984” diameter.

ICE-O-Matic’s

machines are not designed for outdoor installations. ICE-O-Matic®remote condensers are designed for outdoor installations.

Machine requires voltage indicated on rating name plate. Failures caused by improper voltage are not considered factory defects. Extended periods of operation at temperature exceeding limitations constitutes misuse under the terms of ICE-O-Matic

Manufacturer’s Limited Warranty,

resulting in a loss of warranty coverage.

Model Dispenser Bin Storage Voltage Min. Circuit Maximum Shipping

No. Operated by: Applied Capacity* Characteristics No. of Wires Ampacity Fuse Size Weight lbs. (Kgs.)

ORDERING AND SPECIFICATION INFORMATION

Air out

(top discharge)

Air out

(side discharge)

Air in-rear of

ICE Maker

53.25"

(1351 mm)

30"

(762 mm)

24"

(610 mm)

33.5"

(851 mm)

CD 40030 Series Hotel Dispenser

60 Hz 50 Hz

Air-Cooled lbs. (kgs.) 320 (145) 157 (346) 506 (230) 235 (370) 625 (284) Water-Cooled lbs. (kgs.) 351 (160) 154 (338) 528 (240) 257 (566) 567 (258) Remote-Cooled lbs. (kgs.) n/a n/a n/a n/a 591 (269) Voltage Char. 115/60/1 230/50/1 115/60/1 230/50/1 115/60/1

1. Tested at 70º Air/50º Water.

2. All specifications and performance data are subject to normal manufacturing variances.

Model

ICE 0250 ICE 0305 ICE 0400 ICE 0405 ICE 0500

ICE PRODUCTION FOR OPTIONAL CUBE ICE MAKERS — POUNDS (KILOGRAMS) PER 24 HOURS

30"

762.4

10"

WATER VALVE

(WATER FILLER

254.8

152.4

53 1/4"

1351.3

ICE FILL STATION

8 3/4 [221.5] HIEGHT

13 1/2 [342.9] WIDTH

8 1/2 [215.9] DEPTH

609.6

ICE-O-Matic 11100 E. 45th Avenue, Denver, CO 80239

Tel. 303 371-3737 Fax. 303 371-6296 www.iceomatic.com

We reserve the right to make changes in design and construction at any time without obligation. 2004 © ICE-O-Matic Rev Code: 4006A - 011/03-SS

OPERATING LIMITS

Ambient Temp. Range Air & Water 50° - 110°F (10° - 43°C)

Water Temp. Range 40° - 100°F (4.5° - 38°C)

Water Pressure Ice Maker Min. 20 psi (1.4 bar) Water in Max. 60 psi (6.9 bar)

Condenser Inlet Water Min. 20 psi (1.4 bar) (Water cooled only) Max. 60 psi (6.9 bar)

20"

(508 mm)

Half Cube

7/8" x 7/8" x 3/8"

(22mm x 22mm x 10mm)

Full Cube

7/8" x 7/8" x 7/8"

(22mm x 22mm x 22mm)

24"

650.5

25 5/8"

179.1

849.4

33 1/2"

(2) 5/16-18 UNC

ICE HEAD

(WATER FILLER ONLY)

7 1/2"

24.1 1"

POWER CORD

WATER INLET

3/8 FLARE

444.4

17 1/2"

451.1

17 3/4"

189.4 7 1/2"

3/4 FPT DRAIN

189.7