Ice-O-Matic 40022 User Manual

CD 40022 Series Hotel Dispenser

CD 40022

ICE-O-Matic®is the Best ICE Making Solution for:

Hard Water, Food Safety and Tight Spaces

✓ Stores 120 lbs. (55 Kgs.) of ICE ✓ Constructed from sturdy, corrosion-resistant

300 series stainless steel

✓ Only 77 inches (2137 mm) tall with ICE machine ✓ Only 22 inches (558 mm) wide

Problem

Power Clean

Allows access to the bin for easy cleaning without moving the ICE machine. Interlock safety switch turns off machine agitation when top-front access panel is removed.

Simple Operation

• Turbo Dispense - dispenses a 1/4 lb. of ICE per second

• Push to Dispense - user friendly dispensing

• Smudge Proof Finish - prevents fingerprints and smudges

Solution

Hard To Clean

Ice machine must be lifted off of other dispensers for cleaning

Difficult Dispensing

Ice is sometimes slow and difficult to dispense

Ice Melts Too Fast

Inadequate storage insulation causes Ice to melt too quickly

Maximum Preservation

Hotel Dispenser is insulated with an average of 4 inches of foam for maximum ICE preservation

Tight-Fitting Spaces

Vending area utilization

Maximum ICE

Maximum ICE storage in a minimum amount of space with an ultra-low profile

Dimensions and Air Flow

CD 40022 Push 120 (55) 115/60/1 2 2.1 15 199 (91)

CD 40522 Push 120 (55) 230/50/1 2 2.1 15 199 (91)

ICE-O-Matic’s® machines are not designed for outdoor installations. ICE-O-Matic®remote condensers are designed for outdoor installations.

Machine requires voltage indicated on rating name plate. Failures caused by improper voltage are not considered factory defects. Extended periods of operation at temperature exceeding limitations constitutes misuse under the terms of ICE-O-Matic

Manufacturer’s Limited Warranty,

resulting in a loss of warranty coverage.

Model Dispenser ARI Bin Voltage Min. Circuit Maximum Shipping

No. Operated by: Storage Capacity Characteristics No. of Wires Ampacity Fuse Size Weight lbs. (Kgs.)

ORDERING AND SPECIFICATION INFORMATION

Air out -

(side discharge)

Air in -

(rear of ICE Maker)

53.25"

(1553 mm)

22"

(559 mm)

24"

(610 mm)

33.5"

(851 mm)

OPERATING LIMITS

Ambient Temp. Range Air & Water 50° - 110°F (10° - 43°C)

Water Temp. Range 40° - 100°F (4.5° - 38°C)

Water Pressure Ice Maker Min. 20 psi (1.4 bar) Water in Max. 60 psi (6.9 bar)

Condenser Inlet Water Min. 20 psi (1.4 bar) (Water cooled only) Max. 60 psi (6.9 bar)

CD 40022 Series Hotel Dispenser

60 Hz

50 Hz

Air-Cooled lbs. (kgs.) 320 (145) 301 (137) 506 (230) 478 (217) Water-Cooled lbs. (kgs.) 355 (161) n/a 528 (240) n/a Remote-Cooled lbs. (kgs.) n/a n/a n/a n/a Voltage Char. 115/60/1 2320/50/1 115/60/1 230/50/1

1. Tested at 70º Air/50º Water.

2. All specifications and performance data are subject to normal manufacturing variances.

Note #1: Model CD40022 and CD40522 dispensers accept all 22” ICE Series™ Cube ICE Makers

Note #2: CD40022 and CD40522 Series units do not require an Adaptor and Bin Level Kit

Model

ICE 0320 ICE0325 ICE 0520 ICE 0525

ICE PRODUCTION FOR OPTIONAL CUBE ICE MAKERS

— POUNDS (KILOGRAMS) PER 24 HOURS

ICE-O-Matic 11100 E. 45th Avenue, Denver, CO 80239

Tel. 303 371-3737 Fax. 303 371-6296 www.iceomatic.com

We reserve the right to make changes in design and construction at any time without obligation. 2004 © ICE-O-Matic Rev Code: 4005A - 11/03-SS

Half Cube

7/8" x 7/8" x 3/8"

(22mm x 22mm x 10mm)

Full Cube

7/8" x 7/8" x 7/8"

(22mm x 22mm x 22mm)

23"

(584 mm)

33 1/2"

850.1

25 5/8"

650.6

558.8 22"

179.1 7"

406.4 16"

3/4 FPT DRAIN

88.9 3 1/2"

ICE FILL STATION

8 3/4 [221.5] HIEGHT

13 1/2 [342.9] WIDTH

8 1/2 [215.9] DEPTH

1351.3 53 1/4"

152.4 6"

(2) 5/16-18 UNC

ICE HEAD

24.1 1"

POWER CORD