Ice IB1500 Operator's & Parts Manual

Operator & Parts Manual

Floor Burnisher

www.icecompanies.com

5015016
REV.01(08-2016)

iB1500

INTERNATIONAL CLEANING EQUIPMENT

HOW TO ORDER PARTS
Only use ICE Company supplied or equivalent parts. Parts and supplies may be ordered
online,by phone, by fax or by mail.

1. Identify the machine model.

2. Identify the machine serial number from the data label.

3. Ensure the proper serial number is used from the parts list.

4. Identify the part number and quantity.
Do not order by page or reference numbers.

5. Provide your name, company name, customer ID number,billing and shipping address,
phone number and purchase order number.

Please ll out at time of installation for future reference.

Model No.
Serial No.
Machine Options
Sales Rep.
Sales Rep. phone no.
Customer ID Number
Installation Date

READ OPERATOR MANUAL CAREFULLY

I

nternational Cleaning Equipment
XiangShi Road LiaoBu DongGuan GuangDong China
Tel:[phone]
Fax:[phone]

Specifications and parts are subject to change without notice.

PROTECT THE ENVIRONMENT
Please dispose of packaging materials,old machine components
such as batteries,

hazardous uids, including antifreeze and oil, in an environmentally

safe way according to local waste disposal regulations.
Always remember to recycle.

ICE iB1500

2

IMPORTANT:To ensure full warranty protection,Please ll out

& return your warranty card.

SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

MACHINE COMPONENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

MACHINE OPERATING INSTRUCTIONS . . . . . . . . . . . . . . . . . . 6

MACHINE MAINTENANCE & STORAGE . . . . . . . . . . . . . . . . . 7

PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13

WEAR & TEAR PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . .14

SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

WIRING DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3

ICE iB1500

TABLE OF CONTENTS

SAFETY PRECAUTIONS

ICE iB1500

4

OPERATOR

Carefully read and understand this manual before operating this machine.
This machine must be grounded!

This oor/nishing machine shall be grounded while in use to protect the operator from electric

shock.Grounding provides a path of least resistance for electric current. This machine is
equipped with a cord having an equipment-grounding conductor and grounding plug. The plug
must be plugged into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances. Do not remove the ground pin under any circumstances.

This machine is for use on a nominal 120-volt circuit
and has a grounding plug that resembles the plug
illustrated in Figure. Make sure that the machine is

connected to an outlet having the same conguration as

the plug. No adapter should be used with this machine.

This machine is intended for commercial use. It is constructed for use in an indoor environment
and is nor intended for any other use. Use only recommended accessories.

1. Do not operate machine:
– Unless trained and authorized. – Unless you have read and

– In ammable or explosive areas. understand the operators manual.

– With a damaged cord or plug. – With the use of extension cords.
– If not in proper operating condition. – In outdoor areas and standing water.

2. Before operating machine:
– Make sure all safety devices are in place and operating properly.

3. When using machine:
– Only use approved burnishing pads. – Do not run machine over cord.
– Do not pull machine by cord or plug. – Do not pull cord around sharp
– Do not stretch cord. edges or corner.
– Do not unplug by pulling on the cord. – Do not handle plug with wet hands.
– Turn power switch to “off “ prior to – Keep cord away from heated surfaces.
unplugging machine. – Do not pick up burning or smoking
– Report machine damage or faulty debris such as cigarettes, matches
operation immediately. or hot ashes.

T

o avoid electrical shock,please replace the power cord immediately if any damage is
being detected. The replacement must be performed only by an authorized person or
by our customer service center.

4. Before leaving or servicing machine:

– Turn off machine. – Unplug cord from outlet.

5. When servicing machine:

– Unplug cord from outlet. – Use manufacturer supplied or
approved replacement parts.

ICE iB1500

5

OPERATOR

MACHINE COMPONENTS

Machine Description

Machine Structure

1

2

1１

1０　　　　

９

• New structure design

• 20" Housing

• 20" Pad brush

• Engnieering plastics

• Drive belt

• Handle foldable structure

• Safety lock-out switch

• Security protection in an upright

• Use twist spring adjustment pad pressure

• 50' Cord

1. Housing

3. Foldable handle

5. Trigger

7. Handle

9. Twist spring

11. Pad holder

2. Wheel

4. Safety lock-out switch

6. Leveling rod

8. Motor

10. Lock washer

３

４

５

６

７

８