ICC ICMPPMB506 User Manual

Category 5e/6 Mobile Patch Box
INSTALLATION INSTRUCTIONS
Single Blade Punch Down Tool
Strain Relief Boot
IMPORTANT!
Step 1: Disassemble lower body from upper body.
Step 4: Use the supplied cable ties to secure the cable bundle.
Step 2: Determine between TIA-568-A and TIA-568-B wiring. IMPORTANT: For maximum performance, minimize the untwisting of individual pairs to 0.50” maximum.
Step 5: Place lower body on top of upper body. Make sure strain relief is properly seated. Use screws to secure.
Step 3: Place upper body face down on a fl at and fi rm surface. Pass cable through the strain relief boot. Lay the wires on the 110-type IDC and terminate them using a single blade punch down tool.
Step 6: To access ports, fl ip dust covers open. Dust cover can be completely removed and a label may be placed in area provided.
Magnets
Optional: Use #6 screws (not sold by ICC) to mount box to a wall or fl at surface.
Optional: To mount the mobile patch box on a metal surface, install magnets (not included) into open slots inside the lower body.
888-ASK-4ICC csr@icc.com icc.com
© Copyright 2011, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. MSR-0499-RevA
Category 5e/6 Mobile Patch Box
INSTALLATION INSTRUCTIONS
Item # Description Screws Cable Ties
ICMPPMB506 CAT 5e, 6-Port, RJ-45, Loaded 4 2
ICMPPMB606 CAT 6, 6-Port, RJ-45, Loaded 4 2
FEATURES AND BENEFITS
• Solution for areas where fi xed outlet connectivity is unavailable; such as offi ces, warehouses, trade shows, confer-
ences and computer labs
• Provides up to six data ports
• Mounts on fl at surfaces using screws or on metal surfaces using magnets
• Rugged body construction for durability
• Dust covers prevent debris from entering unused ports
OPTIONAL ACCESSORIES
Premise Cables ICCABP5Exx¹ 4-Pair, UTP, CMP, CAT 5e ICCABP6Exx¹ 4-Pair, UTP, CMP, CAT 6 ICCABR5Exx² 4-Pair, UTP, CMR, CAT 5e ICCABR6Exx² 4-Pair, UTP, CMR, CAT 6
• Standard packaging: 1000 feet per EZ Pull Carton (305 meters)
Color (xx¹) = BL-Blue, GY-Gray, WH-White, YL-Yellow Color (xx²) = BL-Blue, GY-Gray, WH-White, YL-Yellow, GN-Green
Patch Cords ICPCSJzzxx¹ CAT 5e, 4 UTP, 24AWG ICPCSKzzxx¹ CAT 6, 4 UTP, 24AWG
• Slim boots fi t narrow port spacing
• UL listed
• Factory tested and wired T568
¹
xx denotes color - BK-Black, BL-Blue, GN-Green, GY­Gray, OR-Orange, RD-Red, WH-White, YL-Yellow zz denotes length - 01, 03, 05, 07, 10, 14, 25 feet
Single Blade Punch-Down Tool ICACSPDT00
• Designed for both 110-type IDC & 66 single-wire termination
• Both blades included
• Adjustable impact settings
• Comfortable grip
Single Blade Tool
Magnets ICMAGBLOCK
• For mounting on fl at metal surfaces
• Works with multimedia boxes, surface mount boxes and mobile patch boxes
2 pcs./Pack
888-ASK-4ICC csr@icc.com icc.com
© Copyright 2011, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. MSR-0499-RevA