Page 1
Blank Patch Panel for Category 6A FTP 10G, 24-Port, 1 RMS
INSTALLATION INSTRUCTIONS
Rack
Grounding screw
Slot
Step 1: Mount the patch panel to the rack using four (4) #12-24 rack
screws.
Step 2: Install the cable management bar onto the rear of the patch
panel. Align the tabs on both sides and push the bracket downward until
fully seated. Use the grounding screw (included) to attach grounding wire
(not included).
Cable tie
Step 3: Insert the CAT 6A FTP modular connector into a port on the patch
panel. Note: Inspect the connector to ensure it is fully seated, and the
front is ush with the panel.
Step 4: Secure the cable to the cable management bar using a nylon
cable tie. Note: A slot on the bar allows you to insert and secure the tie.
888-ASK-4ICC csr@icc.com icc.com
© Copyright 2013, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. MSR-0448-RevB
Page 2
Blank Patch Panel for Category 6A FTP 10G, 24-Port, 1 RMS
INSTALLATION INSTRUCTIONS
D
C
A
Part No. IC107PPS6A
A
24-Port blank patch panel, 1 RMS, 1 pc.
Cable management bar, 1 pc.
B
Cable ties, 24 pcs.
C
#12-24 x 5/8 rack screws, 4 pcs.
D
FEATURES AND BENEFITS
• Panel is congurable with up to 24 CAT 6A FTP high density (HD) modular connectors
• Suitable for applications that required electromagnetic (EMI) and radio frequency interference (RFI) protection
• Panel comes with a cable management bar to support terminated cable from the rear
• Mounts on standard EIA 19” wide racks or wall mountable equipment
OPTIONAL ACCESSORIES
B
TM
JackEasy
ICACSPDTEH
• Works with HD and EZ connectors
• Terminates all 4 pairs of wires
• Both blades included
• Sturdy metal body
• Anti-slip grip
Termination Tool
CAT 6A FTP Modular Connectors
IC1078S6A0
• 8P8C
• Rear split-back IDC
• Shielded housing
• 50 micro-inch gold plated contacts
CAT 6A FTP Premise Cables
ICCABP6FBL FTP/CMP
ICCABR6FBL FTP/CMR
• 4-Pair, 23 AWG
• Solid copper cable
• Designed with an X separator
• 1000 feet per reel
• Shielded jacket
CAT 6A FTP Patch Cords
ICPCSGzzxx1
• 4-Pair, 26 AWG
• Stranded conductors
• 360O shielding from EMI
• Factory tested and wired T568
Length (zz1) = 03, 05, 07, 10, 15, 25 feet
Color (xx1) = WH, BL, YL, BK
888-ASK-4ICC csr@icc.com icc.com
© Copyright 2013, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. MSR-0448-RevB
Loading...