ICC ICMPP0486B Specsheet

Part No: ICMPP0486B
Rev: A
Page 1 of 2

I 888-ASK-4ICC icc.com [e-mail] I

© Copyright 2015, ICC. This document and the designs, specifications and information contained herein are the property of ICC. Reproduction, modification,
alteration or unauthorized use without ICC’s approval is strictly prohibited. ICC and the ICC logo are registered trade name and trademark of ICC. All rights reserved.

Product Specification

CAT 6A 110-Type 10G Patch Panel, 48-Port, 2 RMS

Package Includes

A. 48-Port CAT 6A UTP Patch Panel,

1 PC

B. #12-24 x 5/8” Pan Head, Pilot Point

Machine Screw, 4 PCS

C. Installation Instructions, 1 Sheet

Features and Benefits

 Vertical 110-Type IDC connections reduces potential Alien Crosstalk (ANXT)
 Enhanced crosstalk cancellation and reduced return loss for high bandwidth network requirements
 Exceeds ANSI/TIA-568 CAT 6A (10G) connecting hardware Component Rating requirements
 110-Type IDC termination help reduce installation time and improve wire retention
 50 micro inch gold plating on all modular contacts to protect from corrosion
 Mounts on industry standard 19” wide racks or equipment
 T568A or T568B wiring schemes; not compatible with 110-type patch plug

 UL® listed

Part No: ICMPP0486B
Rev: A
Page 2 of 2

I 888-ASK-4ICC icc.com [e-mail] I

© Copyright 2015, ICC. This document and the designs, specifications and information contained herein are the property of ICC. Reproduction, modification,
alteration or unauthorized use without ICC’s approval is strictly prohibited. ICC and the ICC logo are registered trade name and trademark of ICC. All rights reserved.

Product Specification

Specifications

NOTE: UNLESS OTHERWISE SPECIFIED

1. MEETS TIA/EIA-568-C.2 CAT 6A CONNECTING HARDWARE REQUIREMENTS

2. ENVIRONMENTAL CONDITIONS:
A. TEMPERATURE RANGE

STORAGE: -40° TO +70°C
OPERATIONAL: -10° TO +60°C
RELATIVE HUMIDITY (OPERATIONAL): MAXIMUM NONCONDENSING 93%

3. ELECTRICAL:
A. ELECTRICAL INSULATION RESISTANCE: 500 MOHMS MIN @ 100V DC
B. DIELECTRIC WITHSTANDING VOLTAGE: 1000V DC OR AC PEAK
CONTACT @ 60Hz FOR 1 MINUTE
C. SPRING WIRE CONTACT RESISTANCE: 20 MOHMS MAX.
D. IDC CONTACT RESISTANCE: 2.5 MOHMS MAX.

4. MECHANICAL:
A. RETENTION: 50N (11 LBS SQ) OR 60S±5S
B. INSERTION/EXTRACTOR: 750 CYCLES MIN.
C. IDC WIRE GAUGE: 22~24 AWG

5. PHYSICAL:
A. HOUSING: ZINC ALLOY FULLY SHIELDED
B. MARKING: MOLD UL INFORMATION
C. SPRING WIRE: PHOSPHOR BRONZE ALLOY PLATED WITH 50 MICR0-INCH
OF GOLD OVER 70~100 MICRO-INCH OF NICKEL
D. IDC: PHOSPHOR BRONZE ALLOY WITH 100 MICRO-INCH 100% Sn ALLOY

For warranty information, go online to icc.com/warranty.

Part No: ICMPP0486B

Rev: A