ICC ICCMSSFR12 User Manual
Swing Frame Wall Mount Rack, 12 RMS
INSTALLATION INSTRUCTIONS
16.00”
0.2400”
16.00”
Wooden studs
.97”
20.00”
R0.2400”
Step 1: Locate studs, then use the template to mark 6 locations for mounting screws (not provided). Pre-drill the screws without fully
tighting them.
16.00”
16.00”
Step 2: Rack can be installed to swing open left or right. Place the left and right brackets onto the pre-drilled screws then tighten all
screws.
Screw
Wing bolt
Screw
Step 3: Use four #12-24 screws and two wing bolts to secure the top and bottom of the frame to the brackets. CAUTION! Please do not
exceed more than 85 lbs weight capacity.
Wing bolt
888-ASK-4ICC csr@icc.com icc.com
© Copyright 2014, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. MSR-0493-RevB
Swing Frame Wall Mount Rack, 12 RMS
INSTALLATION INSTRUCTIONS
Item # Dimensions #12-24 screws
ICCMSSFR12 19.50”W x 25.60”H x 18.00”D 25 screws
FEATURES AND BENEFITS
• Manufactured with heavy duty steel.
• Supports up to 85 lbs. when properly mounted and fastened.
• Swing out feature allows for easy maintenance and upgrades.
• Rack can be installed to swing open left or right.
OPTIONAL ACCESSORIES
Metal Ring Panels
ICCMSCMPK1 Panel with cover, 1 RMS
ICCMSCMPK2 Panel with cover, 2 RMS
• For horizontal cable routing
Patch Panels
ICMPP0245E CAT 5e 24-Port, 8P8C, 1 RMS
ICMPP0485E CAT 5e 48-Port, 8P8C, 2 RMS
ICMPP02460 CAT 6 24-Port, 8P8C, 1 RMS
ICMPP04860 CAT 6 48-Port, 8P8C, 2 RMS
• Exceeds ANSI/TIA-568 standards
• Rear 110-Type IDC termination
Blank Panels
ICCMSCMPB1 1.75”H x 19”W, 1 RMS
ICCMSCMPB2 3.50”H x 19”W, 2 RMS
ICCMSCMPB3 5.25”H x 19”W, 3 RMS
ICCMSCMPB4 7.00”H x 19”W, 4 RMS
• Fills empty spaces between
mounted equipment
• Steel construction for durability
Single Horizontal Finger Ducts
ICCMSCMA41 1.75”H x 3.19”D, 1 RMS
ICCMSCMA42 3.50”H x 3.23”D, 2 RMS
• For front cable management
• Durable steel base with plastic ngers
• Includes slide-on cover
1 RMS (Rack Mount Space) = 1.75”
888-ASK-4ICC csr@icc.com icc.com
© Copyright 2014, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. MSR-0493-RevB
Loading...