ICC ICCMSL4PBK, ICCMSLCMRK, ICCMSLESSK, ICCMSLFT90, ICCMSLIR90 User Manual
...
Ladder Rack System
INSTALLATION INSTRUCTIONS
IMPORTANT: Before you start, please plan on how the ladder rack system is to be confi gured.
How to Mount Ladder
Wall Support Bracket, Perpendicular
Wall Support Bracket
Part No.: ICCMSLAWSK
• To mount ladder rack runway to the wall
• Includes 1 bracket and 2 J-Bolts
• Wall fasteners are not included
• Hole size for mounting to the wall is 0.35”
Note: Drywall can not support the weight of ladder rack
J-Bolt
Wall Support Triangle, Parallel
J-Bolt
Triangle
Part No.: ICCMSLTWSK
Includes 1 triangle and 2 J-Bolts
•
• Wall fasteners are not included
• Hole size for mounting to the wall is 0.35”
Note: It is recommended to install a triangle every 5’
5’ Ladder Rack Kit, Perpendicular
Relay Rack Bracket
Wall Support Bracket
J-Bolt
Rack
Part No.: ICCMSLRW05
• To route cable from rack to wall
• Includes a 5’ ladder rack, a relay bracket, a wall bracket,
2 J-bolts and 2 end caps
• Hole size for mounting to the wall is 0.35”
Wall Support Bracket, Vertical
Wall Bracket
Wall Bracket
Part No.: ICCMSLVWBK
• To secure ladder rack runway fl at against the wall
• Includes 2 brackets
• Wall fasteners not included
• Hole size for mounting to the wall is 0.43”
888-ASK-4ICC csr@icc.com icc.com
© Copyright 2014, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. MSR-0352-RevC
Ladder Rack System
INSTALLATION INSTRUCTIONS
IMPORTANT: Before you start, please plan on how the ladder rack system is to be confi gured.
How to Mount Ladder
Floor Mount Kit Ceiling Mount Kit with 6’ Rods
Butt splice
Feet
Ceiling bracket
Rod
Ladder bracket
Part No.: ICCMSLMFFK
• To join ladder rack runway at ends
• Includes 2 feet and 2 Butt splice kits
• Floor fasteners not included
• Hole size for mounting to the fl oor is 0.55”
Cable Radius Drop
Radius drop
Part No.: ICCMSLCMRK
• To sustain over-hanging ladder rack runway to the ceiling
• Includes 2 threaded rods(6’), 2 ladder brackets, 2 ceiling
brackets, and 8 nuts
• Ceiling fasteners not included
• Hole size for mounting to the ceiling is 0.53”
4 Post Relay Rack Brackets
4-Post Adjustable Distribution Rack
Part #:
ICCMSR4P84 7’H, 45 RMS
Rack
Adjustable
Bracket
Part No.: ICCMSLCRDK
• To maintain proper cable bend radius at drop points
• Includes 1 radius controlled drop, 6 bolts and 3 nuts
Part No.: ICCMSL4PBK
• To secure ladder rack runway over 4 post racks
• Includes 2 parallel mounting brackets, 2 perpendicular
mounting brackets and 2 J-Bolts
888-ASK-4ICC csr@icc.com icc.com
© Copyright 2014, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. MSR-0352-RevC
Loading...