ICC ICCMSCMRH7 User Manual
Cable Management Rack Assembly
ICC’s Cable Management Racks are designed to be lightweight, sturdy, and easy to install. These high quality, black powder coated
aluminum racks will support most EIA 19” rack mountable network devices and hardware such as servers, switches, PBX systems, and
other equipment.
PremiumProducts • ProvenPerformance • CompetitivePrices
INSTALLATION INSTRUCTIONS
CUSTOMER CARE / TECHNICAL SUPPORT • CSR@ICC.COM / 888-275-4422 (ASK-4-ICC) • WWW.ICC.COM
© Copyright 2010, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. MSR-0394-RevC
1. Place the Vertical Cable
Management Rails on a flat surface
with the open channels facing inward.
2. Place the top support across the
top end of the Vertical Cable
Management Rails. Install eight
3/8-16 x 3/8” bolts, nuts and
washers as illustrated.
DON’T TIGHTEN!
3. Place one base angle across the
bottom end of the Vertical Cable
Management Rails. Install four
3/8 16 x 5/8” bolts, nuts and washers
as illustrated.
DON’T TIGHTEN!
1. 45 RMS accomodates varying panel
configurations.
2. Self aligning design.
3. Rugged steel and high strength
aluminum construction.
4. Includes 12-24 rack screws
5. Durable black powder coated finish
6. RMU markings
Racks & Cable Management
Features and Benefits
4. Turn the assembly over and repeat
step 3 for the other side.
5. Stand the assembly up to check for
squareness. Make sure the base
angle is level and will rest flat on a
flat surface.
6. Tighten the bolts and torque to
approx. 25-30lb-ft.
7. Place one Cable Management Trough
in the front of the top support. Install
four 12-24 x 5/8” mounting screws
as illustrated.
8. Repeat step 7 for the other side.
9. Anchor the Cable Management
Rack Assembly to the flooring utilizing
the four holes on the base angle.
A
Cable Management Trough
3/8-16 x 5/8” Bolts
3/8” washers
Top Support
12-24 x 5/8” Mounting Screws
E
D
C
B
A
B
C
D
E
Horizontal Metal Cable Management Panel
ICCMSCMP31 4 Horizontal Rings with 2 Side Vertical Rings, 1 Rack Mount Space
ICCMSCMP32 4 Horizontal Rings with 2 Side Vertical Rings, 2 Rack Mount Spaces
ICCMSCMP51 5 Horizontal Rings, 1 Rack Mount Space
ICCMSCMP52 5 Horizontal Rings, 2 Rack Mount Spaces
Horizontal Finger Duct Panel
ICCMSCMA41 Single-Sided Front Ducts, 1 Rack Mount Space
ICCMSCMA42 Single-Sided Front Ducts, 2 Rack Mount Spaces
ICCMSCMA61 Double-Sided Dual Ducts, 1 Rack Mount Space
ICCMSCMA62 Double-Sided Dual Ducts, 2 Rack Mount Spaces
Vertical Finger Duct Panel
ICCMSCMA84 78” ht., 4”x5” Slotted, Single-Sided Finger Ducts
RELATED PRODUCTS
Horizontal Cable Management Panel
ICCMSCMA31 3 Horizontal Rings with 2 Side Vertical Rings, 1 Rack Mount Space
ICCMSCMA32 3 Horizontal Rings with 2 Side Vertical Rings, 2 Rack Mount Spaces
ICCMSCMA51 5 horizontal Rings, 1 Rack Mount Space
ICCMSCMA52 5 horizontal rings, 2 Rack Mount Spaces
ICCMSCMC01 Panel cover, 1 Rack Mount Space
ICCMSCMC02 Panel cover, 2 Rack Mount Spaces
Rack Floor Wall Mount Kit, Concrete
ICCMSRFLKT Rack Hardware, Installation For Concrete Floors and Walls
10” Deep Single Rack Shelf
ICCMSRSF10
2 rack mount spaces
Note: For use with 19” distribution and cable management racks
15” Deep Single Rack Shelf
ICCMSRSF15
3 rack mount spaces
Note: For use with 19” distribution and cable management racks
Sliding Keyboard Shelf
ICCMSRKLST
3 rack mount spaces
Note: For use with 19” distribution and cable management racks
10” Deep Vented Rack Shelf
ICCMSRSV10
2 rack mount spaces
Note: For use with 19” distribution and cable management racks
15” Deep Vented Rack Shelf
ICCMSRSV15
3 rack mount spaces
Note: For use with 19” distribution and cable management racks
1.70” Metal Cable Mgmt. Ring
ICCMSCMPR1
Single, vertical
Note: For use on all racks
3” Metal Cable Mgmt. Ring
ICCMSCMPR2
Single, vertical
Note: For use on all racks
Replacement Hardware Package
ICACSBWSBK
30 pcs. /bag
Loading...