ICC ICCMSC40BK Installation
Step 2: Tighten and lock both
brackets in keyed position
Step 1: Untighten bracket screw
from the front and rotate 90
degree clockwise
Step 2: Tighten and lock bracket in
keyed position
Step 1: Untighten brackets screws
from the front and rotate 90
degree clockwise
To install on the side of rack:
To install between racks:
Step 3: Mount the channel to rack
using Rack Screws ❸ at Rack
Mount Space 5, 18, 28, and 41.
Step 3: Mount the channel to rack
using Rack Screws ❸ at Rack
Mount Space 5, 18, 28, and 41.
Vertical Channel with Plastic Cover, 4 Pack
I N S T A L L A T I O N I N S T R U C T I O N S
©Copyright 2016, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved MSR-0539-RevA
888-ASK-4ICC csr@icc.com icc.com
Two Post Distribution Rack
ICCMSR1948 4 Feet, 24 RMS
ICCMSR1972 6 Feet, 38 RMS
ICCMSR1984 7 Feet, 45 RMS
• Printed RMS numbering for easy
installation
• Use with all ICC’s rack mount products
Four Post Distribution Rack, 7’
ICCMSR4P84
• Adjustable from 27” minimum to 32”
maximum depth
• Use with all of ICC’s rack mount products
Horizontal Cable Management Panel
ICCMSCMA41 Front Single Sided, 1 RMS
ICCMSCMA42 Front Single Sided, 2 RMS
ICCMSCMA61 Double Sided, 1 RMS
ICCMSCMA62 Double Sided, 2 RMS
• Slotted ducts provide neat appearance
• Fits standard 19” racks and cabinets
Vertical Cable Management Panel
ICCMSCMA82 Double Sided, Center
ICCMSCMA83 Double Sided, Side
ICCMSCMA84 Double Sided, Flat
• Provides a neat and clean appearance
❶ ❷ ❸
Part Number: ICCMSC40BK
Package includes:
❶
40” Vertical Metal Channel
4 Pieces
❷
40” Vertical Plastic Channel Cover
4 Pieces
❸
#12-24 x 5/8” Pan Head, Pilot
Point Machine Screw
32 Pieces
ESTIMATED CABLE FILL CAPACITIES (60% FILL)
Feature
Channel
Depth (WxD)
Usable
Area (In²)
CAT 5e
(.18” OD)
CAT 6
(.20” OD)
CAT 6A
(.34” OD)
Fiber
(.079” OD)
6” Channel
5.66”5.63”
28.41 In²
267
217
75
1400
Side
11.75” X 3.2”
35.38 In²
333
270
93
1744
Large Pass-
through
4” X 3.5”
13.76 In²
129
105
36
678
Small Pass-
through
3.5” X 2”
6.67 In²
63
51
17
333
Capacities based on ICC’s cable diameter
Vertical Channel with Plastic Cover, 4 Pack
I N S T A L L A T I O N I N S T R U C T I O N S
F E A T U R E S A N D B E N E F I T S
Fits on the sides of individual racks but can also be used to join two distribution racks
Equipped with feed-through holes on the back side for easier cable routing from front to back
Mounting bracket is pre-installed to channel for easy installation of vertical channel
Mount on the side or in between distribution racks
Compatible with most TIA specification distribution racks
Compatible with ICCMSR1948, ICCMSR1972,ICCMSR1984, ICCMSCMRH7, and ICCMSR4P84 Distribution Rack
One part number two sets includes instructions and hardware in one convenient package
O P T I O N A L A C C E S S O R I E S
©Copyright 2016, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved MSR-0539-RevA
888-ASK-4ICC csr@icc.com icc.com
Loading...