ICC IC107PPU6A, ICMPP246AU User Manual

Congurable CAT 6A Unshielded Twisted Pair (UTP) Blank Patch Panel
INSTALLATION INSTRUCTIONS
Rack
Slot
Step 1: Mount the patch panel to the rack using four (4) #12 rack screws. Step 2: Install the cable management bar onto the rear of the patch
panel. Tilt the bar upwards 45 degrees. Next, insert the tabs on the bar into the slots on both sides of the panel, then tilt the bar down.
Cable tie
Step 3: Insert the CAT 6A HD modular connectors into the port on the patch panel. Note: Inspect the connectors to ensure it is fully seated, and
the front is ush with the panel.
Step 4: Secure the cable to the cable management bar using a nylon cable tie. Note: A slot is designed on the bar, allowing you to insert and loop the tie around the cable.
888-ASK-4ICC csr@icc.com icc.com
© Copyright 2013, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. MSR-0434-RevC
Congurable CAT 6A Unshielded Twisted Pair (UTP) Blank Patch Panel
INSTALLATION INSTRUCTIONS
IC107PPU6A
A
24-Port blank patch panel, 1 RMS, 1 pc.
Cable management bar, 1 pc.
B
Cable ties, 24 pcs.
C
#12-24 x 5/8 rack screws, 4 pcs.
D
D
C
A
FEATURES AND BENEFITS
Panel is congurable with up to 24 CAT 6A UTP modular connectors
• Designed to rack mount CAT 6A HD 10G connectivity
• Panel comes with a cable management bar to support terminated cable from the rear
Panel ts 1 Rack Mount Space (RMS) and 19” EIA rack mount widths
• Package includes cable ties and #12 rack screws
OPTIONAL ACCESSORIES
B
JackEasy
ICACSPDTEH
Works with HD and EZ connectors
• Terminates all 4 pairs of wires
• Both blades included
• Sturdy metal body
• Anti-slip grip
TM
Termination Tool
CAT 6A UTP Modular Connectors
IC1078GAxx*
• 8P8C
• Rear split-back IDC
• Shielded termination cap
• 50 micro-inch gold plated contacts
Color (xx1) = WH, IV, BL, OR, RD, BK
CAT 6A UTP Premise Cables
ICCABP6Axx1 CMP ICCABR6Axx1 CMR
• 650 MHz, 4-Pair, 23 AWG
• Solid copper cable
• Designed with an X separator
• 1000 feet per reel
Color (xx1) = WH, BL
CAT 6A FTP Patch Cords
ICPCSGzzxx1
• 4-Pair, 26 AWG
• Stranded conductors
• 360O shielding from EMI
• Factory tested and wired T568
Length (zz1) = 03, 05, 07, 10, 15, 25 feet Color (xx1) = WH, BL, YL, BK
888-ASK-4ICC csr@icc.com icc.com
© Copyright 2013, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. MSR-0434-RevC
Loading...