ICC IC1078S6A0 Specsheet
ise
faceplates, and surface mount
Product Specification
Category 6A Shielded Modular Connector
Package Includes
A. Category 6A Shielded Connector, 1 pc
B. Wire Cap, 1 pc
C. Retaining Clip, 1 pc
D. Cable Tie, 1 pc
Features and Benefits
• CAT 6A shielded connectors provide excellent performance for data networks requiring
maximum speed and bandwidth.
• Enhanced crosstalk cancellation reduces return loss and improves performance by rejecting no
and unwanted signals.
• Engineered to provide wire termination cap for a quick and easy termination.
• Shielded housing provides against electro-magnetic interference (EMI).
• Compatible with TIA-568A/B wiring diagram.
• Ideal for 22-24AWG solid wire.
• Compatible with ICC CAT 6A FTP blank patch panel IC107PPS6A,
boxes.
• UL listed and exceeds TIA 568-C.2 Category 6A connecting hardware requirements.
Part No: IC1078S6A0
Rev: C
Page 1 of 2
© Copyright 2013, ICC. This document and the designs, specifications and information contained herein are the property of ICC. Reproduction, modification,
alteration or unauthorized use without ICC’s approval is strictly prohibited. ICC and the ICC logo are registered trade name and trademark of ICC. All rights reserved.
I 888-ASK-4ICC icc.com csr@icc.com I
NCH
Product Specification
Specifications
NOTE: UNLESS OTHERWISE SPECIFIED
1. CAT6A FTP MODULAR CONNECTOR:
A. ENVIRONMENTAL CONDITIONS:
-TEMPERATURE RANGE
-STORAGE:-40 TO +70°C, OPERATIONAL:-10 TO +60°C
-RELATIVE HUMIDITY (OPERATIONAL): MAXIMUM NONCONDENSING 93%
B. ELECTRICAL:
-INSULATION RESISTANCE: 500 MEGAOHM MIN
-CONTACT RESISTANCE: 20 MILLIOHM MAX
-DIELECTRIC WITHSTANDING VOLTAGE: 1,000 VOLTS D.C., 60 HZ, 1 MIN
C. MECHANICAL:
-TOTAL CONTACT FORCE: 800 GRAM FOR 8 WIRE LEADS MINIMUM
-RETENTION: 50N (11 LBF) FOR 60S±5S
-INSERTION LIFE: 750 CYCLES MIN
D. PHYSICAL:
-HOUSING: ZINC-ALLOY FULLY SHIELDED
-SPRING WIRE: PHOSPHOR BRONZE ALLOY PLATED WITH 50 MICRO-I
OF GOLD OVER 70~100 MICRO-INCH OF NICKEL
2. WIRE CAP: ZINC-ALLOY
3. IDC WIRE GAUGE: 22~24 AWG SOLID WIRE
4. CERTIFICATION: A. Meets ANSI/TIA-568-C.2 (500 MHz)
For warranty information, go online to icc.com/warranty.
Part No: IC1078S6A0
Rev: C
Page 2 of 2
© Copyright 2013, ICC. This document and the designs, specifications and information contained herein are the property of ICC. Reproduction, modification,
alteration or unauthorized use without ICC’s approval is strictly prohibited. ICC and the ICC logo are registered trade name and trademark of ICC. All rights reserved.
Part No: IC1078S6A0
I 888-ASK-4ICC icc.com csr@icc.com I
Rev: C
Loading...