I-can 1100T DELTA, 1100T ICE, 1100T BLACK User Manual
1100T Black
All Rights Reserved
The product described in this manual is protected by national and international copyright laws. Any
duplication of the software or hardware comprising the product is strictly prohibited. In addition,
no part of this manual may be reproduced or transmitted, in any form or by any means, electronic
or mechanical, including photocopying, recording, or information storage and retrieval systems, for
any purpose other than the purchaser’s personal use, without the prior written permission of the
manufacturer.
Disclaimer
The manufacturer specifically disclaims all warranties, either express or implied, including but not
limited to merchantability, accuracy, completeness, noninfringement or fitness for a particular
purpose, with respect to the software, the accompanying product manual(s) and written materials,
and any accompanying hardware. The manufacturer reserves the right to revise or make improvements to its product and related materials at any time and without obligation to notify any person
of such revisions or improvements. In no event shall the manufacturer be liable for any special,
incidental, consequential or punitive damages, including any loss of business profits or any other
commercial damages, arising out of the use of its product.
Trademarks
ADB Logo and i-CAN Logo are trademarks or registered trademarks of ADVANCED DIGITAL
BROADCAST S.A.
All other product or service names are the property of their respective owners.
2
1100T Black
Safety First
Removing the decoder’s
cover may lead to a severe &
potentially fatal electric shock.
This digital decoder has been manufactured to
meet international safety standards. However,
safety precautions must be followed to ensure
the safe and reliable operation of the decoder.
Please take note of the following guidelines to
avoid the risk of an electric shock.
This decoder operates with an external
power supply in the range of 100 to 240V
AC, 50/60 Hz. Use a standard AC wall outlet; a DC power source cannot be used. Remember that contact with a 110-240 Volt
AC power supply can be lethal.
Ensure that all electrical connections are
properly made before connecting the decoder to the power supply (the mains). Always unplug the decoder (from the mains)
before connecting or disconnecting any
cables.
Whenever you connect the decoder to the
power supply (the mains), always connect
the power lead to the power input connector on the back panel of the decoder before
you connect the power brick to the wall
socket (outlet).
Whenever you disconnect the decoder
from the power supply, always remove the
power brick from the wall socket (outlet)
before you remove the other end of the
lead from the power input connector on
the back panel of the decoder.
Never attempt to repair or reconstruct the
decoder yourself. A serious electric shock
may occur if this decoder is repaired, disassembled or reconstructed by an unauthorized person.
Be extremely careful if this unit comes into
contact with water. Immediately disconnect
the power brick if possible.
DO
If anything falls into the cabinet, unplug the
decoder and have it checked by a qualified
technician.
Allow adequate air circulation to prevent in-
ternal heat build-up. Do not place the unit
next to a radiator or any heat source and
make sure that the air vents are not covered.
DO NOT
Do not expose the decoder to extreme tem-
peratures, direct sunlight or high humidity.
Do not place any objects on top of the de-
coder which restrict air circulation.
Do not place the decoder on fabric furni-
shings, carpets or other flammable materials.
Maintenance
If you wish to clean your decoder, first unplug it from the mains. To clean the decoder, use a soft,
dry cloth. For very dirty surfaces, dip a soft cloth in a weak soap-and-water solution and wring
well. After cleaning, wipe with a soft, dry cloth.
Never use alcohol, paint thinner, or a chemically treated cloth to clean this unit. Such chemicals may
damage the unit’s finishing.
3
1100T Black
Contents
Safety First ............................................................................................................................... 3
Maintenance ............................................................................................................................ 3
Introduction ............................................................................................................................. 6
About This Manual .............................................................................................. 6
About Your Decoder (Set-Top Box) ....................................................................... 6
Your Decoder ........................................................................................................................... 7
Unpacking Your Digital Decoder ..................................................................................... 7
Overall Look ................................................................................................................... 7
Back Panel ..................................................................................................................... 8
Connectivity Diagram .................................................................................................. 8
Smart Card .................................................................................................................... 9
Looking After Your Smart Card ............................................................................. 9
Remote Control ......................................................................................................................10
How to Set up Your Decoder ..................................................................................................12
Welcome Screen ...........................................................................................................12
Select Language ............................................................................................................12
Channel Numbering Method .........................................................................................12
Channel Search ..............................................................................................................13
TV Screen Format ................................................................................................13
Using Your Decoder ..............................................................................................................14
Turning Your Decoder On / Off ......................................................................................14
Basic Rule “Point & Select” ............................................................................................14
Selecting Channels ........................................................................................................14
Channel Banner ............................................................................................................15
Browsing through Channels and Programs in the Channel Banner........................15
Extended Information About Programs .........................................................................17
Channel List ...................................................................................................................17
Options Menu ...............................................................................................................18
Audio Language ..................................................................................................18
Subtitle Language ................................................................................................18
Teletext Language ...............................................................................................18
Display Format .....................................................................................................18
Running Interactive Applications ....................................................................................19
Locked Channels and Programs ..................................................................................... 20
4
1100T Black
Main Menu ...........................................................................................................................21
Main Menu Structure...........................................................................................21
Short overview of the basic functions of the Main Menu submenus .................... 22
Viewer Planner ............................................................................................................. 22
Setting a Timer ....................................................................................................24
Setting a Reminder ..............................................................................................24
Channel Manager ......................................................................................................... 26
Add Channels ..................................................................................................... 26
Delete Channels ................................................................................................. 27
Move Channels ................................................................................................... 27
Skip Channels ..................................................................................................... 28
Hide Channels .................................................................................................... 29
Restore Channels ................................................................................................ 29
Rename Channels ............................................................................................... 30
Lock Channels .....................................................................................................31
List Organization ........................................................................................................... 32
For Parents ................................................................................................................... 33
Receiver Lock ...................................................................................................... 33
Parental Level ..................................................................................................... 34
Change PIN Code ............................................................................................... 34
Your Preferences ........................................................................................................... 35
Display Options .................................................................................................. 35
Language Options .............................................................................................. 36
Pay Per View ................................................................................................................. 37
Installation .................................................................................................................... 37
Settings .............................................................................................................. 37
TV Settings ......................................................................................................... 38
System Settings .................................................................................................. 38
EPG Settings ....................................................................................................... 39
Modem Settings ................................................................................................. 39
Modem Diagnostics ............................................................................................ 39
Signal Meter ....................................................................................................... 39
Channel Search .................................................................................................. 40
Receiver Status ................................................................................................... 40
Factory Reset ...................................................................................................... 40
Help ..............................................................................................................................41
Electronic Program Guide ....................................................................................................... 42
Before Requesting Service ...................................................................................................... 43
Technical Specification ........................................................................................................... 45
5
1100T Black
Introduction
About This Manual
This User Manual describes the overall functionality of your decoder (set-top box). You will find
here the information you need to operate your decoder and take advantage of all its features.
First, make sure that your decoder is properly connected. Then, pick up your remote control and
follow the hints of this manual. Once you have learned how to operate the remote control and
familiarized yourself with the main features of your decoder, you will need this manual only for
occasional consultation.
Terminology in the Manual
In order to avoid misunderstanding, please bear in mind what is meant by the following terms:
a menu – refers to a window/screen which contain items available for selection
Main Menu – refers just to the window (menu) and its content (including submenus), which is
displayed after pressing the button
submenu – describes any menu that is opened from another one
window, screen – used interchangeably.
About Your Decoder (Set-Top Box)
Your decoder will allow you to do the following:
prevent your children from viewing unsuitable programs,
•
display additional information about a selected program,
•
use interactive applications,
•
create lists of your favorite channels,
•
set a reminder,
•
and much more.
•
Please note that your decoder’s software is being improved all the time and
therefore, from time to time, software on your decoder may be updated. If you
do not change the default settings of the decoder, the upgrade process will be
carried out automatically. After the upgrade process is completed, you can learn
about new features from the What is New? submenu (Main Menu – Help).
Downloading a new software version may change the previous functionality of
the decoder and at the same time some information provided in this manual
may become outdated.
Please note that if you want to have the most up-to-date software version
and updated channel lists on your decoder, it is advisable that you switch the
decoder to standby mode when you are not using it.
6
1100T Black
Your Decoder
Unpacking Your Digital Decoder
As you unpack your digital decoder, please make sure that the following accessories are included:
Decoder* Remote
Control
If any parts are missing, please contact your vendor.
* Please note that the look of your decoder’s casing may differ from the one in the picture.
Power Brick SCART
Cable
RF
Coaxial
Cable
Telephone
Cable
Overall Look
Please note that the look of your decoder’s casing may differ from the one in the picture.
Batteries
LED Indicator:
Green – operating mode
Red – in standby, low power consumption
The LED indicator blinks when your de-
coder is receiving signals from the remote
control.
Smart Card Slot: Smart Card allows you
to view scrambled TV channels. Gently
push the card into the slot. Its chip should
face downwards and the symbol of an
arrow should face inwards.
7
1100T Black
Back Panel
1
2
3 4
5
6
TV
RF Signal Loop-Through
Antenna Socket
Telephone
Socket
Power Socket
Hi-Fi
Please note that the look of your decoder’s back panel may differ from the one in the picture.
RJ-11 input (V.90 Modem port)1. Antenna Out for analogue TV programs – RF
DC Input from external power supply2. 2xRCA (audio stereo)5.
Antenna In3. TV SCART output6.
4.
signal (loop-through)
Connectivity Diagram
Please note that the look of your decoder’s back panel may differ from the one in the picture.
In order to be able to watch TV channels and listen to Radio channels, you need to connect your
decoder to:
•
•
•
8
a TV set
the mains (power source)
an antenna
1100T Black
Smart Card
Smart Card allows you to view scrambled channels. Gently push the card into the slot. The chip
should face downwards and the arrow symbol should face inwards.
Without a Smart Card, you can view free-to-air channels.
If you have more questions about the card functioning, contact your service provider.
Looking After Your Smart Card
The card is fragile, so bear in mind the following precautions:
Do not bend or twist the card
•
Do not expose the card to heat or direct sunlight
•
After inserting the card, leave it in the slot permanently
•
Clean only with a soft dry cloth
•
9
1100T Black
Remote Control
Button Action
Switches the decoder between standby and operating modes (turns the decoder on and off).
Allow you to tune to a desired channel, select menu items and enter the PIN code (the default PIN
code is 1234).
Mutes the sound. Pressing this button once again restores the previously set volume level.
Displays the Options menu where you can change audio, subtitle and teletext language as well
as display format. You can change an option only if its alternatives are broadcast with a particular
program.
Adjust the volume.
Tune to the next/previous channel. In some menus, they scroll pages up and down.
Displays / hides the Main Menu where you can change different settings of your decoder.
Displays and hides the window with the currently selected channel list. In this window, you can
change channel lists and tune to a desired channel.
This button is inactive.
Displays the Electronic Program Guide.
Switches between the Channel Banner, Channel Banner with Extended Information and
viewing mode in a circular manner.
In different menus, they shift highlight. In the Channel Banner, they browse through channels.
When up/down shifting is possible, there are icons displayed.
In the Channel Banner, they switch between the current and next program information. In different
screens, they highlight items or change values. When left/right shifting is possible, there are the
In the Channel Banner, if the icon is displayed, it tunes to the channel which name is
displayed or sets a Reminder when the information about the next program is displayed. In different
menus and screens, it selects the currently highlighted item or confirms your choices.
In viewing mode, it alternates between the current and previous channel within the same Channel
List. In different screens, it returns to the previous screen.
Returns to normal viewing.
icons displayed.
10
1100T Black
Navigate through external applications. They are also used to perform a few additional functions in
some screens.
Displays and hides the Applications window.
Used by some external applications.
Switches your decoder between the TV and Radio modes.
This button is inactive.
11
1100T Black
How to Set up Your Decoder
The process described below takes place when the decoder is turned on for the first time and
when the factory settings are being restored.
Welcome Screen
Once you have connected your decoder to the TV and
any other equipment, plug them all to the mains and
turn them on. Af ter several seconds you will see the
Welcome Screen on your TV screen. Afterwards, the
subsequent screens, which are described below, will
appear.
Please note that in the following screens you will have 10
seconds to make a selection. If you don’t press by
that time, the decoder will automatically select the highlighted item and will move to the next screen.
Welcome Screen
Select Language
The Select Language screen allows you to select the
language in which all the menus and messages will be
displayed on the TV screen. In the Select Language win-
dow, press / to highlight the on-screen
language, and then press to make a selection. Once
you have selected the language, the Confirmation
screen will appear. Press to confirm your choice of
the on-screen language or press to return to the
Select Language screen.
The language selected in this window is also automatically
assigned as the language of Primary Audio, Primary
Subtitles and Teletext Language. Please note that you
can also change the on-screen language in the Language Options screen (Main Menu – Your
Preferences).
Select Language
Channel Numbering Method
In the Select Channel Numbering Method screen, you
can choose the way channels will be numbered.
If you choose Automatic Channel Numbering, the
channels will be organized as the broadcaster ordered
them (usually thematically).
If you choose Normal Channel Numbering, the channels will be numbered in the order they are found during
the Channel Search process.
12
Channel Numbering Method
1100T Black
Channel Search
After you have selected a numbering method and pressed
, the channel search will start automatically. When
this procedure is completed, you will be informed about
the total number of channels found. Then, press the
button to tune to the first TV channel.
If the channel searching procedure has not been completed successfully, a suitable error message will appear.
You can then either press the button to go back to
the Select Language screen or enter the Main Menu by
pressing the button. In the Main Menu you will be
able to access the Installation and Help submenus.
TV Screen Format
When you are setting up a new decoder for the first time,
by default, the deocder sets TV Screen Format to 4:3.
It means that if the screen format of your TV is 4:3, there
is no need to modify TV Screen Format setting in the
decoder’s menu.
Channel Search
However, if the screen format of your TV is 16:9, using
“Point and Select” rule (see page 14), go to the Main
Menu, Installation, Settings, TV Settings and change
the TV Screen Format option to 16:9.
TV Screen Format
13
1100T Black
Using Your Decoder
Turning Your Decoder On / Off
First, switch on the TV set and any other connected equipment. Then, switch on your decoder by
pressing the or , or buttons on the remote control. When the decoder comes out
of standby, the LED indicator on the front panel illuminates green and the receiver tunes to the last
viewed channel.
When you are not using your decoder, put it in standby mode by pressing the button. When
the decoder is in standby mode, the LED indicator on the front panel illuminates red.
Basic Rule “Point & Select”
To use your decoder successfully, you need to know and “master” the “Point
and Select” rule. You will use this rule every time you go to the menus and
submenus of the decoder.
You “point” by pressing the arrow buttons on the remote control, which
moves the “on-screen” highlight to different items. Once you have pointed
to an item (highlighted an item) on the screen, select it by pressing the
button on the remote control.
You can also press the button to go to the previous screen or to close all the windows
(screens) and return to normal viewing.
Selecting Channels
You can tune to the desired channel in a few ways:
Press to tune to the next channel and press
1.
to tune to the previous channel.
Enter the number of the desired channel using the
2.
keys. When you press a number button, the
Channel Number Entry Box appears in the upper
right corner of the screen.
Press the button, highlight the desired channel
3.
and press to tune to this channel.
Press the button in order to display the Channel Banner. Then, browse through channels
4.
using the / buttons. Press to tune to the channel which name is displayed
in the Channel Banner.
Channel Number Entry Box
14
Loading...