IC MPW User Manual
C>1µF
.06
-
-
3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com
177
®
Polypropylene film
Dissipation Factor
(%)
• Good AC/ pulse applications
• Polystyrene alternative
• Self healing
• Capacitance range: 0.001 µF to 10.0 µF
• Voltage range: 160 WVDC to 630 WVDC
MPW
+105°C Metallized
Polypropylene Axial
Leaded Wrap
and Fill Capacitors
Operating Temperature Range
Capacitance Tolerance
-55°C to 105°C
±10% at 1kHz, 25°C
Humidity Test
Load Life
Insulation Resistance
Voltage Range
WVDC
VAC
160 250 400 630
90 200 220 250
Capacitance Insulation Resistance
≤0.33 µF 100,000 MΩ
>0.33 µF 30,000 MΩ x µF
2,000 hours, +85°C with 125% rated DC voltage
Capacitance Change
Dissipation Factor
Change
Insulation
Resistance
≤3% maximum
<125% maximum
specification
≥50% of minimum
initial limits
250 hours, 95% RH, 25°C and no applied voltage
Capacitance Change
Dissipation Factor
Change
Insulation Resistance
5% of initial readings
@ +25°C, 1kHz
< 200% of maximum
specification
≥ 3000MΩ xµF
(need not exceed 500MΩ)
Self-inductance
≤1 nH/mm along the capacitor body and leads
Capacitance Drift Factor
Capacitance Temperature
Coefficient
(after 2 years) ≤0.5% up to 40°C
-200 ppm/°C, ± 100ppm/°C
Type
Dielectric
Electrodes
Leads
Extended metallized film
Vacuum deposited aluminum layers
Tinned copper wire
Coating
Flame retardant epoxy sealed resin
-
(UL94V-O) with polyester tape wrap
(UL510)
kHz
1
10
100
C≤0.1µF
.06
.1
.3
0.1µF<C≤1µF
.06
.2
-
Film Capacitors
3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com
178
®
160
(90)
250
(200)
400
(220)
630
(250)
MPW
+105°C Metallized
Polypropylene Axial
Leaded Wrap and Fill
Capacitors
PHYSICAL DIMENSIONS
0.001 5.5x11.5
0.0015 5.5x11.5 6x14.5
0.0022 5.5x11.5 6x14.5
0.0033 5.5x11.5 6x14.5
0.0047 5.5x11.5 6x14.5
0.0068 5.5x11.5 6x14.5
0.0082 5.5x11.5 6x14.5
0.01 6x14.5 6.5x14.5
0.015 5.5x14.5 6.5x14.5 7x14.5
0.022 5.5x11.5 6x14.5 7x14.5 8.5x14.5
0.033 5.5x11.5 6.5x14.5 7x14.5 8.5x20.5
0.047 5.5x11.5 6.5x14.5 8.5x14.5 9x20.5
0.068 6.5x14.5 7x14.5 8.5x20.5 9x29
0.1 6.5x14.5 8.5x14.5 8.5x20.5 10.5x29
0.15 7x14.5 8x20.5 9.5x29 12x29
0.22 8x14.5 9.5x20.5 10.5x29 12.5x34
0.33 8.5x20.5 10x29 12.5x29 15.5x34
0.47 9.5x20.5 11x29 14x29 18x34
0.68 10x29 12.5x29 15x34 22x34
1 11x29 13x34 17.5x34
1.5 13x29 16x34 20.5x34
2.2 13.5x34 19x34 24x46
3.3 16x34 17x47 24x47
4.7 18x34 22.5x47 28.5x47
6.8 18.5x46.5
10 22.5x46.5
µF
WVDC
(VAC)
Convert to inches, divide by 25.4
DxL(mm)
Lead Diameter
Dd
< 8.0 0.6
8≤D≤22 0.8
>22 1.0
D
Max
35.0 min
L
Max
d
35.0 min
Loading...