IBRIDGE JL1910BM, JL1720BM User Manual
Customer Support
Main Office: 15-15 Yoido-dong, 4th Fl. Ilshin Bldg., Youngdeungpo-gu, Seoul
A/S Center
: 40-999 Hangang-ro 3-ga, I-Park Mall Electronics Store P-501,
Yongsan-gu, Seoul
Factory: 68 Gobong-ri, Seongsan-myun, Gunsan, Chollabuk-do
IInnssttaallllaattiioonn aanndd SSaaffeettyy IInnssttrruuccttiioonnss
These are instructions to keep you safe and prevent the loss of your property
Please read carefully to learn how to use the device properly
User Manual
3
FCC Compliance Statement
2
Table of Contents
FCC Compliance Statement ..................................................................................... 3
Safety Instructions ..................................................................................................... 4
List of Features.......................................................................................................... 5
List of Parts................................................................................................................ 6
Connections............................................................................................................... 7
Timing Guide ............................................................................................................. 8
Pin Configuration ....................................................................................................... 9
- VGA Connection (Cable Side)
- DVI Connection (Cable Side)
Functions of the Controls ........................................................................................ 10
Menu Descriptions................................................................................................... 11
Troubleshooting....................................................................................................... 14
Specifications........................................................................................................... 15
❖ NOTE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against radio frequency interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy.
If not installed and used in accordance with the instructions, it may cause interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause interference to radio or television reception (this can be
determined by turning this equipment off and on), the user is encouraged to try to correct
the interference by one or more of the following measures:
●
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
●
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
●
Consult the dealer or an experienced radio/TV technician for help.
●
Modifications not expressly approved by the manufacturer could void the user’s authority
to operated the equipment under FCC rules.
CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER(OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
Safety Instructions
54
Safety Instructions
Do not apply any physical shock
to the panel (monitor screen).
It may cause personal injury
and/or malfunction.
Do not install the monitor in
wet or dusty locations.
It may cause a fire, electric shock,
and/or damage to the monitor.
Avoid placing the monitor in
direct sunlight or near a heater
or fireplace.
It may present a fire hazard.
Take caution not to block the
ventilation openings when you
install the monitor.
Overheating may pose a fire
hazard.
Disassembly, repair, or
modification by unauthorized
personnel is not allowed.
It may cause a fire, electric
shock, and/or damage to the
monitor.
Do not install the monitor on a tilted
surface or in a place where it can
be exposed to severe vibration.
It may cause the monitor to fall
or tip over, resulting in personal
injury or damage to the
unit.
Take caution not to spill liquids
(e.g., water, coffee, etc.) or put
or drop coins, hairpins,
matchsticks or other foreign
objects into the openings of the
monitor.
It may cause a fire, electric
shock, and/or damage to the
monitor.
If you see smoke coming from
the monitor or notice any signs
of malfunction, turn off the
power switch, remove the
power cord and contact the
Customer Center.
Continued use may cause an
electric shock or a fire.
To clean the screen surface,
first unplug the monitor and
wipe the surface with a soft
cloth. (Never use acetone or
alcohol, as it can cause
damage to the LCD surface.)
It may cause a fire or electric
shock.
This device is a class B digital apparatus.
List of Features
The iBridge Cyfix JL 1720BM / JL 1910BM:
Has a 17/19-inch, amorphous-silicon TFT (Thin Film Transistor)
LCD panel and supports up to 1280x1024.
Supports both Analog (15-pin D-Sub) and Digital (24-pin DVI-D)
signals and is compatible with the IBM PC and Apple MacintoshTM.
(You need an additional adapter to use it with an Apple
Macintosh.)
Automatically switches to horizontal frequencies (30-80 kHz)
or vertical frequencies (55-75 Hz).
"
Has an energy-saving feature and consumes 40W (17
50W (19" ) when turned on and less than 3W when turned off.
Supports audio features.
Is an ultra-light and ultra-slim monitor.
) ,
Loading...