i-box Slix 79198R, Slix 79199R User Manual

USER GUIDE

Slix

SPLASHPROOF BLUETOOTH® SPEAKER

79198R & 79199R

Features

The Slix Bluetooth speaker can be paired to another Slix speaker to give true wireless left/right stereo
sound.
Other features include:

• IPx5 Splashproof rating

• Up to10 hours battery life

• Connection via Bluetooth or AUX 3.5mm jack input

• Super-slim design with 2 x 1.5” speakers and passive subwoofer (6 Watts RMS output power)

• Hands-free speakerphone function.

1 52 3 4 6

1. Power on/off

2. Press to return to previous track(s)

3. Answer phone call/Play/Pause

4. Press to forward to next track(s)

5. Volume -

6. Volume +

7. AUX - IN

8. Micro USB charging port

9. Charging indicator LED

10. STATUS LED

Controls and connections

Fig. 2Fig. 1

• Weight: 201g per unit

• Dimensions: 155 x 53 x 28mm

• Advanced audio distribution profile (A2DP)
for wireless music streaming

• Hands-free audio (HFA) and Headset profiles
(HSP) for hands-free calling

• 10m (30 feet) wireless range

• Charging time: 3-4 hours

• Play time: up to 10 hours

• Battery voltage: 3.7 volts

• Input: 5V/500mA

• Max output power: 6 Watts RMS

• Bluetooth v2.1

Specifications

1

7

8

9

10

1. Press and hold down the power button on the Slix for 3 seconds, the LED will flash red/blue
indicating the Slix is ready to pair.

2. Search, and select “i-box Slix” on your source device.

3. Once paired the STATUS LED (10 in Fig. 2) will show a constant solid blue light.

If a constant solid blue STATUS LED light is displayed when first powering on the Slix it has
automatically paired to the last connected device.

To un-pair the previous connected device tap the

Power button twice. Turn the speaker off and

on again. The STATUS LED will now flash red/blue indicating the Slix is ready to pair again.

1. Press and hold down the

Power button on the first Slix for 3 seconds. The LED will flash blue/blue

to indicate the Slix is ready to pair, repeat this process on the second Slix.

2. Press the Play/Pause button twice on both Slix. The STATUS LEDs will flash fast blue/blue and you
will hear audible notification to indicate that both Slix are in the process of pairing with each other.

3. After a few moments the speakers will pair (this may take up to 30sec).

You only need to pair the two Slix speakers together once. After this they will remember each other
unless reset.

4. Press and hold down the Play/Pause button for 3 seconds on one Slix to enter pairing mode with
your Bluetooth device. Search, and select “i-box Slix” on your source device.

5. Once paired with the Bluetooth device the master Slix will display solid blue STATUS LED and
second Slix will show a slow flashing blue/blue STATUS LED.

6. The master Slix can control power and volume functions of the second Slix simultaneously.

If a constant solid blue STATUS LED light is displayed when first powering on the Slix it has
automatically paired to the last connected device.

To un-pair the previous connected device tap the

Power button twice. Turn the speaker off and on

again. The STATUS LED will now flash red-blue indicating the Slix is ready to pair again.

Charging

(3.7V 1200mAh rechargeable battery built-in)

1. Turn off the speaker before charging

2. Plug the micro USB end of the USB charging cable (supplied) into the micro USB port (8 in Fig. 2)
marked “USB CHARGE” on the end of the speaker.

3.

Plug the other end into a USB Power port such as a plug in mains charger (not supplied), laptop or PC

4. The LED charging indicator (9 in Fig. 2) next to the micro USB port on the end of the speaker
will illuminate red while charging and turn off when fully charged.

2

Bluetooth device setup for Slix (single unit)

Bluetooth device and stereo setup for Slix2 (twin pack)

1. When there is an incoming call, touch the Phone symbol (3 in Fig. 1) once to answer via speaker
and the built in microphone (the music will immediately stop playing).

2. Touch it again to end a call (the music will re-start automatically).

3. When there is no call incoming, the

Phone symbol (3) will work as Play/Pause to control music.

Touch to start music, touch again to pause.

Hands-free: Answering a phone call via the speaker