IBM YY-W2xx, YY-R5xx User Manual
YY-W2xx
Pedestal Server Chassis
YY-R5xx
5U Rackmount Server Chassis
Installation Guide
2005.04. Version B
ZZ17-W2001-B
1
INDEX
1. Introduction
2. Hardware Packing List
3. System Installation
3.1.Chassis Open
3.2.Motherboard Installation
3.3.Add-on Card Installation
3.4.CD–ROM Drive/FDD Installation.
3.5.Fixed HDD Cage , HDD Installation
3.6.Instructions for Switches and LED Indicators on front panel
3.7.Instructions for cooling fan assembly
3.8.Rack Mount Sliding Rails Installation
4.1 System Assembly
4. Introduction of IDE/SCSI/SATA multi-bay backplane
modules
5. How to change versatile as Rackmount Chassis (5U)
All brand names and trademarks are the property of their respective owner.
Specifications are subject to change without prior notice.
2
ZZ17-W2001-B
1. INTRODUCTION
YY-W2 series Server Chassis is designed in compliant with EEB3.0
specification (refer to www.ssiforum.org
) and ATXV2.1 (refer to
www.formfactors.org)
Mother Board:
z
YY-W2 is designed for extended ATX (12"x13"), in compliant
with ATX spec, CEB and EEB3.0 spec.
z
Storage:
The chassis supply drive bays with flexible configuration:
z
z
A type : Supply 8 x 5.25" + 2 x 3.5” HDD drive bays
B type: Supply 5 x 5.25"drive bays and 7 x 3.5" HDD drive
bays, i.e. A type plus HDD fixed cage
z
C type: Supply flexible and expandable drive configuration
with multi bay backplane module, support for SCSI/SATA/IDE
HDD, well performed thermal solution and HDD indicators.
I/O Expansion Slots:
z
7 slots
Power Supply, Optional:
z
z
Single Power Supply of 420W~650W
Redundant power supply of 320W~600W
Operating Temperature:
z5к
to 40к(41л ~ 104л)
3
ZZ17-W2001-B
Thermal Solution:
z
z
One(1) 120x120mm Cooling Fan is installed, rear mounted
Options of two (2) 60*60*25mm, rear mounted.
Switches and LED Indicators on front panel
z
z
z
z
z
z
z
z
Power Switch (Push Switch)
Reset Button (Push Switch)
Power On LED (Green)
HDD LED (Orange flash)
FAN ALARM (Red)
LAN LED (Green/Flash) X 2
Power Fail LED [optional /reserved for Power Failure Signal]
USB Ports X 4, Audio ports [Optional]
Rack Mount Rail: (Optional)
z
24Inch Sliding Rails
Chassis Dimensions & Weight
z
Depth 600 mm* Width 220 mm* Height 427mm
(23.6-in * 8.66-in * 16.8in)
Net Weight with Single Power Supply is 15Kg(33lbs)
z
Material for Chassis: SECC sheet metal
4
ZZ17-W2001-B
2. Hardware Packing List
When you unpack your YY-W2 Server Chassis, check that all the
items that you ordered are present in good condition. Review the
inventory checklist below to be sure that the components and
optional components that you ordered are included. If anything is
missing or damage, contact your retailer as soon as possible. Don’t
use any uncertified material or components in this system.
Chassis
z
A type
ϭ
B type
ϭ
C type
ϭ
ϭ
Power Supply (Optional)
Single Power Supply
ϭ
Power Watts: _____________
Optional Accessories:
z
AC Cord
ϭ
USA ϭJapan
ϭ
Card Clamp Holder
ϭ
Foot Stands (two pairs)
ϭ
Rack Mount Sliding Rails 24-inch
ϭ
Intrusion switch
ϭ
Manual
ϭ
ATA I DE
SCSI ϭSATA Raid Module
ϭ
Redundant Power Supply
ϭ
Germany ϭOthers
ϭ
ZZ17-W2001-B
5
Loading...