IBM NetVista 8302, NetVista 8301, NetVista 8306, NetVista 8307, NetVista 8303 User Manual

...

Download

NetVista

™

User Guide Type 8301, 8302, 8303, 8304, 830 5 Type 8306, 8307, 8308, 8309, 8310 Type 8311, 8312, 8313, 8314, 8315



NetVista

™

User Guide Type 8301, 8302, 8303, 8304, 830 5 Type 8306, 8307, 8308, 8309, 8310 Type 8311, 8312, 8313, 8314, 8315



Note

Before using this information and the product it supports, be sure to read the “Safety Information” on page v and Appendix E, “Notices” on page 97.

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

Contents

Safety Information ..........vi

Lithium battery notice ...........vi

Modem safety information .........vi

Lasercompliancestatement.........viii

Overview ..............ix

Informationresources...........ix

Identifying your computer..........x

Chapter 1. Types 8301 and 8302 ....1

Features................1

Specifications ..............4

Availableoptions.............5

Handling static-sensitive devices........5

Installing external options ..........6

Locating connectors on the front of your computer 6 Locating the connectors on the rear of your

computer..............8

Chapter 2. Types 8303, 8304, and 8312 . 9

Features................9

Specifications ..............12

Availableoptions............13

Toolsrequired.............13

Handling static-sensitive devices .......13

Installing external options .........14

Locating the connectors on the front of your

computer..............14

Locating the connectors on the rear of your

computer..............16

Obtainingdevicedrivers.........16

Removingthecover ...........17

Locating components ...........18

Identifying parts on the system board .....19

Installing memory ............19

Installing adapters ............20

Installing internal drives ..........23

Drive specifications...........23

Installing a drive ...........24

Installing a rope clip ...........25

Changing the battery ...........27

Erasing a lost or forgotten password (clearing

CMOS)................28

Replacing the cover and connecting the cables. . . 28

Chapter 3. Types 8305, 8306, 8309, and

8313 ................31

Features...............31

Specifications ..............34

Availableoptions............35

Toolsrequired.............35

Handling static-sensitive devices .......35

Installing external options .........36

Locating the connectors on the front of your

computer..............36

Locating the connectors on the rear of your

computer..............38

Obtainingdevicedrivers.........38

Removingthecover ...........39

Locating components ...........40

Identifying parts on the system board .....41

Installing memory ............41

Installing adapters ............42

Installing internal drives ..........44

Drive specifications...........45

Installing a drive ...........45

Installing a rope clip ...........48

Changing the battery ...........49

Erasing a lost or forgotten password (clearing

CMOS)................50

Replacing the cover and connecting the cables. . . 51

Chapter 4. Types 8307, 8308, 8310,

8311, 8314, and 8315 .........53

Features...............53

Specifications ..............56

Availableoptions............57

Tools required .............57

Handling static-sensitive devices .......57

Installing external options .........58

Locating the connectors on the front of your

computer..............58

Locating the connectors on the rear of your

computer..............60

Obtainingdevicedrivers.........60

Removingthecover ...........61

Locating components ...........62

Moving the power supply .........62

Identifying parts on the system board .....64

Installing memory ............64

Installing adapters ............65

Installing internal drives ..........67

Drive specifications...........68

Installing a drive ...........68

Installing a rope clip ...........71

Changing the battery ...........73

Erasing a lost or forgotten password (clearing

CMOS)................74

Replacing the cover and connecting the cables. . . 74

Chapter 5. Using the IBM Setup Utility

program ..............77

Starting the IBM Setup Utility program .....77

Viewing and changing settings ........77

Exiting from the IBM Setup Utility program . . . 77

Usingpasswords............77

Userpassword............78

Administrator password .........78

Setting, changing, and deleting a password. . . 78

Using Security Profile by Device .......78

Selecting a startup device..........79

Selecting a temporary startup device .....79

Changing the startup sequence .......79

Appendix A. Updating system

programs .............81

System programs ............81

Updating (flashing) BIOS from a diskette . . . 81

Updating (flashing) BIOS from your operating

system ...............81

Recovering from a POST/BIOS update failure . . . 82

Appendix B. Manual modem

commands .............83

Basic AT commands ...........83

Extended AT commands ..........85

MNP/V.42/V.42bis/V.44 commands ......86

Fax Class 1 commands ..........87

Fax Class 2 commands ..........87

Voice commands.............88

Appendix C. System address maps . . 91

System memory map ...........91

I/O address map ............91

DMA I/O address map ..........93

Appendix D. Interrupt request and direct memory access channel

assignments ............95

Appendix E. Notices .........97

Television output notice ..........97

Trademarks..............98

PC Green label compliance information (Japan) . . 100

Index ...............101

User Guide

Safety Information

DANGER

Electrical current from power, telephone, and communication cables is hazardous.

To avoid a shock hazard: v Do not connect or disconnect any cables or perform installation, maintenance,

or reconfiguration of this product during an electrical storm.

v Connect all power cords to a properly wired and grounded electrical outlet. v Connect to properly wired outlets any equipment that will be attached to this

product.

v When possible, use one hand only to connect or disconnect signal cables. v Never turn on any equipment when there is evidence of fire, water, or

structural damage.

v Disconnect the attached power cords, telecommunications systems, networks,

and modems before you open the device covers, unless instructed otherwise in the installation and configuration procedures.

v Connect and disconnect cables as described in the following table when

installing, moving, or opening covers on this product or attached devices.

To connect:

1. Turn everything OFF.

2. First, attach all cables to devices.

3. Attach signal cables to connectors.

4. Attach power cords to outlet.

5. Turn device ON.

To disconnect:

1. Turn everything OFF.

2. First, remove power cords from outlet.

3. Remove signal cables from connectors.

4. Remove all cables from devices.

DANGER

Le courant électrique provenant de l’alimentation, du téléphone et des câbles de transmission peut présenter un danger.

Pour éviter tout risque de choc électrique : v Ne manipulez aucun câble et n’effectuez aucune opération d’installation,

d’entretien ou de reconfiguration de ce produit au cours d’un orage.

v Branchez tous les cordons d’alimentation sur un socle de prise de courant

correctement câblé et mis à la terre.

v Branchez sur des socles de prise de courant correctement câblés tout

équipement connecté à ce produit.

v Lorsque cela est possible, n’utilisez qu’une seule main pour connecter ou

déconnecter les câbles d’interface.;

v Ne mettez jamais un équipement sous tension en cas d’incendie ou

d’inondation, ou en présence de dommages matériels.

v Avant de retirer les carters de l’unité, mettez celle-ci hors tension et

déconnectez ses cordons d’alimentation, ainsi que les câbles qui la relient aux

réseaux, aux systèmes de té lécommunication et aux modems (sauf instruction contraire mentionnée dans les procédures d’installation et de configuration).

v Lorsque vous installez, que vous déplacez, ou que vous manipulez le présent

produit ou des périphériques qui lui sont raccordés, reportez-vous aux instructions ci-dessous pour connecter et déconnecter les différents cordons.

Connexion:

1. Mettez les unités hors tension.

2. Commencez par brancher tous les

cordons sur les unités.

3. Branchez les câbles d’interface sur des connecteurs.

4. Branchez les cordons d’alimentation sur des prises.

5. Mettez les unités sous tension.

Lithium battery notice

CAUTION: Danger of explosion if battery is incorrectly replaced.

When replacing the battery, use only IBM Part Number 33F8354 or an equivalent type battery recommended by the manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of.

Do not:

v Throw or immerse into water v Heat to more than 100°C (212°F) v Repair or disassemble

Déconnexion:

1. Mettez les unités hors tension.

2. Débranchez les cordons d’alimentation

des prises.

3. Débranchez les câbles d’interface des connecteurs.

4. Débranchez tous les câbles des unités.

Dispose of the battery as required by local ordinances or regulations.

ATTENTION

Danger d’explosion en cas de remplacement incorrect de la batterie.

Remplacer uniquement par une batterie IBM de type ou d’un type équivalent recommandé par le fabricant. La batterie contient du lithium et peut exploser en cas de mauvaise utilisation, de mauvaise manipulation ou de mise au rebut inappropriée.

Ne pas :

v Lancer ou plonger dans l’eau v Chauffer à plus de 100°C (212°F) v Réparer ou désassembler

Mettre au rebut les batteries usagées conformément aux règlements locaux.

Modem safety information

To reduce the risk of fire, electrical shock, or injury when using telephone equipment, always follow basic safety precautions, such as:

v Never install telephone wiring during a lightning storm.

vi User Guide

v Never install telephone jacks in wet locations unless the jack is specifically

designed for wet locations.

v Never touch uninsulated telephone wires or terminals unless the telephone line

has been disconnected at the network interface.

v Use caution when installing or modifying telephone lines. v Avoid using a telephone (other than a cordless type) during an electrical storm.

There may be a remote risk of electric shock from lightning.

v Do not use the telephone to report a gas leak in the vicinity of the leak.

Consignes de sécurité relatives au modem

Lors de l’utilisation de votre matériel téléphonique, il est important de respecter les consignes ci-après afin de réduire les risques d’incendie, d’électrocution et d’autres blessures :

v N’installez jamais de cordons téléphoniques durant un orage. v Les prises téléphoniques ne doivent pas être installées dans des endroits

humides, excepté si le modèle a été conçu à cet effet.

v Ne touchez jamais un cordon téléphonique ou un terminal non isolé avant que

la ligne ait été déconnectéeduréseau téléphonique.

v Soyez toujours prudent lorsque vous procédez à l’installation ou à la

modification de lignes téléphoniques.

v Si vous devez téléphoner pendant un orage, pour éviter tout risque de choc

électrique, utilisez toujours un téléphone sans fil.

v En cas de fuite de gaz, n’utilisez jamais un téléphone situéàproximité de la

fuite.

Laser compliance statement

Some IBM Personal Computer models are equipped from the factory with a CD-ROM drive or a DVD-ROM drive. CD-ROM drives and DVD-ROM drives are also sold separately as options. CD-ROM drives and DVD-ROM drives are laser products. These drives are certified in the U.S. to conform to the requirements of the Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class 1 laser products. Elsewhere, these drives are certified to conform to the requirements of the International Electrotechnical Commission (IEC) 825 and CENELEC EN 60 825 for Class 1 laser products.

When a CD-ROM drive or a DVD-ROM drive is installed, note the following handling instructions.

CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein might result in hazardous radiation exposure.

Removing the covers of the CD-ROM drive or DVD-ROM drive could result in exposure to hazardous laser radiation. There are no serviceable parts inside the CD-ROM drive or DVD-ROM drive. Do not remove the drive covers.

Some CD-ROM drives and DVD-ROM drives contain an embedded Class 3A or Class 3B laser diode. Note the following statement.

Safety Information vii

DANGER

Laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam.

DANGER:

Certains modèles d’ordinateurs personnels sont équipésd’origine d’une unité de CD-ROM ou de DVD-ROM. Mais ces unités sont également vendues séparément en tant qu’options. L’unité de CD-ROM/DVD-ROM est un appareil à laser. Aux État-Unis, l’unité de CD-ROM/DVD-ROM est certifiée conforme aux normes indiquées dans le sous-chapitre J du DHHS 21 CFR relatif aux produits à laser de classe 1. Dans les autres pays, elle est certifiée être un produit à laser de classe 1 conforme aux normes CEI 825 et CENELEC EN 60 825.

Lorsqu’une unité de CD-ROM/DVD-ROM est installée, tenez compte des remarques suivantes:

ATTENTION: Pour éviter tout risque d’exposition au rayon laser, respectez les consignes de réglage et d’utilisation des commandes, ainsi que les procédures décrites.

L’ouverture de l’unité de CD-ROM/DVD-ROM peut entraîner un risque d’exposition au rayon laser. Pour toute intervention, faites appel à du personnel qualifié.

Certaines unités de CD-ROM/DVD-ROM peuvent contenir une diode à laser de classe 3A ou 3B. Tenez compte de la consigne qui suit:

DANGER

Rayonnement laser lorsque le carter est ouvert. Évitez toute exposition directe des yeux au rayon laser. Évitez de regarder fixement le faisceau ou de l’observer à l’aide d’instruments optiques.

viii User Guide

Overview

Thank you for selecting an IBM®computer. Your computer incorporates many of the latest advances in computer technology and can be upgraded as your needs change.

This publication supports several computer models. Information in this section will help you identify your computer and help you find the chapter that contains information specific to your computer.

Adding hardware options to your computer is an easy way to increase its capabilities. Instructions for installing external and internal options are included in this publication. When adding an option, use these instructions along with the instructions that come along with the option.

Information resources

The Quick Reference that comes with your computer provides information for installing your computer and starting the operating system. It also includes basic troubleshooting information, software recovery procedures, help and service information, and warranty information.

Access IBM, on your desktop, provides a link to more information about your computer.

If you have Internet access, the most up-to-date manuals for your computer are available from the World Wide Web. To access this information, point your browser to

http://www.ibm.com/pc/support

Type your machine type and model number in the Quick Path field, and click Go.

Identifying your computer

See Chapter 1, “Types 8301 and 8302”

on page 1.

See Chapter 2, “Types 8303, 8304, and 8312” on page 9.

See Chapter 3, “Types 8305, 8306, 8309, and 8313” on page 31.

See Chapter 4, “Types 8307, 8308, 8310, 8311, 8314, and 8315” on page 53.

x User Guide

Chapter 1. Types 8301 and 8302

This chapter provides an introduction to the features that are available for your computer.

Important

Before you install or remove any option, read “Safety Information” on page v. These precautions and guidelines will help you work safely.

Features

This section provides an overview of the computer features and preinstalled software.

Microprocessor

Pentium®4 processor with 512 KB of internal L2 cache memory and Intel

Intel NetBurst™micro-architecture

Memory

v Support for two dual inline memory modules (DIMMs) v 512 KB flash memory for system programs

Internal drives

v Internal hard disk drive

Note: The hard disk drive should only be removed for maintenance or upgrade

and not for daily security.

v EIDE CD-ROM drive (some models)

Video subsystem

Intel Extreme

™

graphics

Audio subsystem

Integrated SoundMAX 3 audio

Connectivity

10/100 Mbps integrated Intel Ethernet controller that supports the Wake on LAN feature

System management features

v Remote Program Load (RPL) and Dynamic Host Configuration Protocol (DHCP) v Wake on LAN v Wake on Ring (in the IBM Setup Utility program, this feature is called Serial Port

Ring Detect for an external modem and Modem Ring Detect for an internal modem)

v Remote Administration v Automatic power-on startup v System Management (SM) BIOS and SM software v Ability to store POST hardware test results

Input/output features

v 25-pin, Extended Capabilities Port (ECP)/Extended Parallel Port (EPP) v Two 9-pin serial connectors v Six 4-pin, USB connectors

v PS/2

mouse connector

v PS/2 keyboard connector v Ethernet connector v VGA monitor connector v Three audio connectors (line in, line out, and microphone)

Expansion

Two drive bays

Power

v 125 W power supply with manual voltage selection switch v Automatic 50/60 Hz input frequency switching v Advanced Power Management support v Advanced Configuration and Power Interface (ACPI) support

Security features

v User and administrator passwords v Support for the addition of a rope clip and lockable cable v Support for the addition of an integrated cable lock v Startup sequence control v Startup without keyboard or mouse v Unattended start mode v Serial and parallel port I/O control v Security profile by device

IBM preinstalled software

Your computer might come with preinstalled software. If it does, an operating system, device drivers to support built-in features, and other support programs are included.

Operating systems (preinstalled) (varies by model type)

Note: Not all countries or regions will have these operating systems.

v Microsoft

2 User Guide

Windows®XP Home

v Microsoft Windows XP Professional v Microsoft Windows 2000 Professional

Operating systems (tested for compatibility)

v Microsoft Windows NT®Workstation Version 4.0 v Microsoft Windows 98 Second Edition v OS/2

1. The operating systems listed here are being tested for compatibility at the time this publication goes to press. Additional operating systems might be identified by IBM as compatible with your computer following the publication of this booklet. Corrections and additions to this list are subject to change. To determine if an operating system has been tested for compatibility, check the Web site of the operating system vendor.

Chapter 1. Types 8301 and 8302

Specifications

This section lists the physical specifications for your computer.

Dimensions

Height: 110 mm (4.3 in.) Width: 310 mm (12.2 in.) Depth: 343 mm (13.5 in.)

Weight

Minimum configuration as shipped: 8.1 kg (18 lb) Maximum configuration: 9.1 kg (20 lb)

Environment

Air temperature:

System on: 10° to 35°C(50° to 95° F) System off: 10° to 43°C(50° to 110° F)

Maximum altitude: 2134 m (7000 ft) Note: The maximum altitude, 2134 m (7000 ft), is the maximum altitude at which the specified air temperatures apply. At higher altitudes, the maximum air temperatures are lower than those specified.

Humidity:

System on: 8% to 80% System off: 8% to 80%

Electrical input

Input voltage:

Low range:

Minimum: 90 V ac Maximum: 137 V ac Input frequency range: 57–63 Hz Voltage switch setting: 115 V ac

High range:

Minimum: 180 V ac Maximum: 265 V ac Input frequency range: 47–53 Hz Voltage switch setting: 230 V ac

Input kilovolt-amperes (kVA) (approximate):

Minimum configuration as shipped: 0.08 kVA Maximum configuration: 0.30 kVA

Heat output (approximate) in British thermal units (Btu) per hour:

Minimum configuration: 257 Btu/hr (75 watts) Maximum configuration: 497 Btu/hr (145 watts)

Airflow

Approximately 0.40 cubic meters per minute (14 cubic feet per minute) maximum

Acoustical noise-emission values

Average sound-pressure levels:

At operator position:

Idle: 34 dBA Operating: 36 dBA

At bystander position - 1 meter (3.3 ft):

Idle: 31 dBA Operating: 34 dBA

Declared (upper limit) sound-power levels:

Idle: 4.4 bels Operating: 4.7 bels

Note: These levels were measured in controlled acoustical environments according to the procedures specified by the American National Standards Institute (ANSI) S12.10 and ISO 7779 and are reported in accordance with ISO 9296. Actual sound-pressure levels in a given location might exceed the average values stated because of room reflections and other nearby noise sources. The declared sound-power levels indicate an upper limit, below which a large number of computers will operate.

Note: See the Quick Reference for the classification of your computer.

Note: Power consumption and heat output vary depending on the number and type of optional features installed and the power-management optional features in use.

4 User Guide

Available options

The following are some available options:

v External options

v Internal drives, such as

For the latest information about available options, see the following World Wide Web pages:

v http://www.ibm.com/pc/us/options/ v http://www.ibm.com/pc/support/

You can also obtain information by calling the following telephone numbers:

v Within the United States, call 1-800-IBM-2YOU (1-800-426-2968), your IBM

v Within Canada, call 1-800-565-3344 or 1-800-IBM-4YOU. v Outside the United States and Canada, contact your IBM reseller or IBM

– Parallel port devices, such as printers and external drives – Serial port devices, such as external modems and digital cameras – Audio devices, such as external speakers for the sound system – USB devices, such as printers, joysticks, and scanners – Monitors

– CD-ROM drive (some models) – Hard disk drive

reseller, or IBM marketing representative.

marketing representative.

Handling static-sensitive devices

Static electricity, although harmless to you, can seriously damage computer components and options.

When you add an option, do not open the static-protective package containing the option until you are instructed to do so.

When you handle options and other computer components, take these precautions to avoid static electricity damage:

v Limit your movement. Movement can cause static electricity to build up around

you.

v Always handle components carefully. Handle adapters and memory modules by

the edges. Never touch any exposed circuitry.

v Prevent others from touching components. v When you install a new option, touch the static-protective package containing

the option to a metal expansion-slot cover or other unpainted metal surface on the computer for at least two seconds. This reduces static electricity in the package and your body.

v When possible, remove the option and install it directly in the computer without

setting the option down. When this is not possible, place the static-protective package that the option came in on a smooth, level surface and place the option on it.

v Do not place the option on the computer cover or other metal surface.

Chapter 1. Types 8301 and 8302 5

Installing external options

This section shows the various external connectors on your computer to which you can attach external options, such as external speakers, a printer, or a scanner. For some external options, you must install additional software in addition to making the physical connection. When adding an external option, use the instructions that come with the option to help you make the connection and install any software or device drivers that are required for the option.

Locating connectors on the front of your computer

The following illustration shows the locations of the connectors on the front of the computer.

1USB connector 2USB connector

6 User Guide

Locating the connectors on the rear of your computer

The following illustration shows the locations of the connectors on the rear of the computer.

1Serial connector 8 Microphone connector 2Mouse connector 9 USB connectors 3Parallel connector 10VGA monitor connector 4Ethernet connector 11Serial connector 5Audio line in connector 12USB connectors 6Power connector 13Keyboard connector 7Audio line out connector

Note: Some connectors on the rear of the computer are color-coded to help you to

determine where to connect the cables on your computer.

Chapter 1. Types 8301 and 8302 7

Connector Description

Serial connector Used to attach an external modem, serial printer, or other

devices that use a 9-pin serial connector.

Mouse connector Used to attach a mouse, trackball, or other pointing device that

uses a standard mouse connector.

Parallel connector Used to attach a parallel printer, parallel scanner, or other

devices that use a 25-pin parallel connector.

Ethernet connector Used to attach an Ethernet cable for a local area network

(LAN). Note: To operate the computer within FCC Class B limits, use a Category 5 Ethernet cable.

Audio line in connector Used to receive audio signals from an external audio device,

such as a stereo system. When you attach an external audio device, a cable is connected between the audio line out connector of the device and the audio line in connector of the computer.

Audio line out connector Used to send audio signals from the computer to external

devices, such as powered stereo speakers (speakers with built-in amplifiers), headphones, multimedia keyboards, or the audio line in connector on a stereo system or other external recording device.

Microphone connector Used to attach a microphone to your computer when you want

to record voice or other sounds on the hard disk if you use speech-recognition software.

USB connectors Used to attach a device that requires a Universal Serial Bus

(USB) connection, such as a USB scanner or USB printer. If you have more than four USB devices, you can purchase a USB hub, which you can use to connect additional USB devices.

Keyboard connector Used to attach a keyboard that uses a standard keyboard

connector.

8 User Guide

Chapter 2. Types 8303, 8304, and 8312

This chapter provides an introduction to the features and options that are available for your computer. You can expand the capabilities of your computer by adding memory, adapters, or drives. When installing an option, use these instructions along with the instructions that come with the option.

Important

Before you install or remove any option, read “Safety Information” on page v. These precautions and guidelines will help you work safely.

Features

This section provides an overview of the computer features and preinstalled software.

Microprocessor (varies by model type)

Pentium®4 processor with 256 KB or 512 KB of internal L2 cache memory

Intel and Intel NetBurst™micro-architecture

Memory

v Support for two dual inline memory modules (DIMMs) v 512 KB flash memory for system programs

Internal drives

v 3.5-inch, 1.44 MB diskette drive v Internal hard disk drive v EIDE CD-ROM drive or DVD-ROM drive (some models)

Video subsystem

™

v Intel Extreme

graphics

v Accelerated graphics port (AGP) video adapter slot on the system board (some

models)

Audio subsystem

Integrated SoundMAX 3 audio

Connectivity

v 10/100 Mbps integrated Intel Ethernet controller that supports the Wake on

LAN®feature

v Soft modem V.90/V.44 (some models)

System management features

v Remote Program Load (RPL) and Dynamic Host Configuration Protocol (DHCP) v Wake on LAN v Wake on Ring (in the IBM Setup Utility program, this feature is called Serial Port

Ring Detect for an external modem and Modem Ring Detect for an internal modem)

v Remote Administration v Automatic power-on startup v System Management (SM) BIOS and SM software v Ability to store POST hardware test results

Input/output features

v 25-pin, Extended Capabilities Port (ECP)/Extended Parallel Port (EPP) v Two 9-pin serial connectors v Six 4-pin, USB connectors

v PS/2

mouse connector

v PS/2 keyboard connector v Ethernet connector v VGA monitor connector v Three audio connectors (line in, line out, and microphone) v Front connectors for headphone, microphone, IEEE 1394, and S/PDIF (some

models)

Expansion

v Three drive bays v Three 32-bit peripheral component interconnect (PCI) adapter slots (supports

low-profile adapters only)

v One accelerated graphics port (AGP) expansion slot (supports low-profile

adapters only)

Power

v 160 W power supply with manual voltage selection switch v Automatic 50/60 Hz input frequency switching v Advanced Power Management support v Advanced Configuration and Power Interface (ACPI) support

Security features

v User and administrator passwords v Support for the addition of a rope clip and lockable cable v Support for the addition of an integrated cable lock v Startup sequence control v Startup without diskette drive, keyboard, or mouse v Unattended start mode

10 User Guide

v Diskette and hard disk I/O control v Serial and parallel port I/O control v Security profile by device

IBM preinstalled software

Your computer might come with preinstalled software. If it does, an operating system, device drivers to support built-in features, and other support programs are included.

Operating systems (preinstalled) (varies by model type)

Note: Not all countries or regions will have these operating systems.

v Microsoft

Windows®XP Home

v Microsoft Windows XP Professional v Microsoft Windows 2000 Professional

Operating systems (tested for compatibility)

v Microsoft Windows NT®Workstation Version 4.0 v Microsoft Windows 98 Second Edition v OS/2

2. The operating systems listed here are being tested for compatibility at the time this publication goes to press. Additional operating systems might be identified by IBM as compatible with your computer following the publication of this booklet. Corrections and additions to this list are subject to change. To determine if an operating system has been tested for compatibility, check the Web site of the operating system vendor.

Chapter 2. Types 8303, 8304, and 8312

Specifications

This section lists the physical specifications for your computer.

Dimensions

Height: 104 mm (4.1 in.) Width: 360 mm (14.2 in.) Depth: 412 mm (16.2 in.)

Weight

Minimum configuration as shipped: 8.1 kg (18 lb) Maximum configuration: 9.1 kg (20 lb)

Environment

Air temperature:

System on: 10° to 35°C(50° to 95° F) System off: 10° to 43°C(50° to 110° F)

Humidity:

System on: 8% to 80% System off: 8% to 80%

Electrical input

Input voltage:

Low range:

Minimum: 90 V ac Maximum: 137 V ac Input frequency range: 57–63 Hz Voltage switch setting: 115 V ac

High range:

Minimum: 180 V ac Maximum: 265 V ac Input frequency range: 47–53 Hz Voltage switch setting: 230 V ac

Input kilovolt-amperes (kVA) (approximate):

Minimum configuration as shipped: 0.08 kVA Maximum configuration: 0.30 kVA

Heat output (approximate) in British thermal units (Btu) per hour:

Minimum configuration: 257 Btu/hr (75 watts) Maximum configuration: 806 Btu/hr (235 watts)

Airflow

Approximately 0.45 cubic meters per minute (16 cubic feet per minute) maximum

Acoustical noise-emission values

Average sound-pressure levels:

At operator position:

Idle: 32 dBA Operating: 35 dBA

At bystander position - 1 meter (3.3 ft):

Idle: 29 dBA Operating: 33 dBA

Declared (upper limit) sound-power levels:

Idle: 4.4 bels Operating: 4.7 bels

Note: See the Quick Reference for the classification of your computer.

Note: Power consumption and heat output vary depending on the number and type of optional features installed and the power-management optional features in use.

12 User Guide

Available options

The following are some available options:

v External options

v Internal options

– System memory, called dual inline memory modules (DIMMs) – Peripheral component interconnect (PCI) adapters (supports low-profile

adapters only)

– Accelerated graphics port (AGP) adapters (supports low-profile adapters

only)

– Internal drives, such as:

- CD-ROM drive and DVD-ROM drive (some models)

- Hard disk drive

- Diskette drives and other removable media drives

For the latest information about available options, see the following World Wide Web pages:

v http://www.ibm.com/pc/us/options/ v http://www.ibm.com/pc/support/

You can also obtain information by calling the following telephone numbers: v Within the United States, call 1-800-IBM-2YOU (1-800-426-2968), your IBM

reseller, or IBM marketing representative.

v Within Canada, call 1-800-565-3344 or 1-800-IBM-4YOU. v Outside the United States and Canada, contact your IBM reseller or IBM

marketing representative.

Tools required

To install some options in your computer, you might need a flat-blade or Phillips screwdriver. Additional tools might be needed for certain options. See the instructions that come with the option.

Handling static-sensitive devices

Static electricity, although harmless to you, can seriously damage computer components and options.

When you add an option, do not open the static-protective package containing the option until you are instructed to do so.

When you handle options and other computer components, take these precautions to avoid static electricity damage:

Chapter 2. Types 8303, 8304, and 8312 13

v Limit your movement. Movement can cause static electricity to build up around

you.

v Always handle components carefully. Handle adapters and memory modules by

the edges. Never touch any exposed circuitry.

v Prevent others from touching components. v When you install a new option, touch the static-protective package containing

the option to a metal expansion-slot cover or other unpainted metal surface on the computer for at least two seconds. This reduces static electricity in the package and your body.

v When possible, remove the option and install it directly in the computer without

setting the option down. When this is not possible, place the static-protective package that the option came in on a smooth, level surface and place the option on it.

v Do not place the option on the computer cover or other metal surface.

Installing external options

This section shows the various external connectors on your computer to which you can attach external options, such as external speakers, a printer, or a scanner. For some external options, you must install additional software in addition to making the physical connection. When adding an external option, use the information in this section to identify the required connector, and then use the instructions that come with the option to help you make the connection and install any software or device drivers that are required for the option.

Locating the connectors on the front of your computer

The following illustration shows the locations of the connectors on the front of the computer.

1USB connector 2USB connector

14 User Guide

Locating the connectors on the rear of your computer

The following illustration shows the locations of the connectors on the rear of the computer.

1Serial connector 9 Audio line out connector 2Mouse connector 10Microphone connector 3Parallel connector 11USB connectors 4Ethernet connector 12VGA monitor connector 5Audio line in connector 13Serial connector 6Power connector 14USB connectors 7PCI slots 15Keyboard connector 8AGP slot (some models)

Note: Some connectors on the rear of the computer are color-coded to help you to

determine where to connect the cables on your computer.

Chapter 2. Types 8303, 8304, and 8312 15