IBM NetVista 6336, NetVista 6337, NetVista 6341, NetVista 6342, NetVista 6346 User Manual

...



User Guide Ty pe s 6336, 6337, 6339, 6341, 6 342, 6346, 6347, 6348, 2254, 2256, 2257



User Guide Ty pe s 6336, 6337, 6339, 6341, 6 342, 6346, 6347, 6348, 2254, 2256, 2257

Note

Before using this information and the product it supports, be sure to read the “Safety Information” on page v and Appendix E, “Notices and trademarks” on page 69.

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

Contents

Safety Information .......................v

Lithium battery notice .......................vi

Modem safety information .....................vi

Laser compliance statement ....................viii

About this book ........................ix

How this book is organized.....................ix

Information resources .......................x

Chapter 1. Overview .......................1

Identifying your computer .....................1

Small desktop model computer ..................2

Desktop model computer ....................2

Microtower model computer ...................3

Features............................3

Specifications ..........................5

Physical specifications — small desktop model ............6

Physical specifications — desktop model ...............7

Physical specifications — microtower model .............8

Available options.........................9

Tools required..........................9

Handling static-sensitive devices ...................9

Chapter 2. Installing external options ................11

Locating the connectors on the front of your computer ..........12

Locating the connectors on the rear of your computer ..........16

Home PNA network adapter ...................16

Obtaining device drivers .....................17

Chapter 3. Installing internal options — small desktop model ......19

Removing the cover .......................19

Locating components ......................20

Identifying parts on the system board ................21

Installing memory ........................21

Installing DIMMs .......................21

Installing adapters........................22

Installing internal drives ......................23

Drive specifications ......................24

Installing a drive .......................24

Installing a Rope Clip ......................26

Replacing the cover and connecting the cables .............26

Chapter 4. Installing internal options — desktop model ........29

Removing the cover .......................29

Locating components ......................30

Identifying parts on the system board ................31

Installing memory ........................31

Installing DIMMs .......................31

Installing adapters........................32

Installing internal drives ......................33

Drive specifications ......................34

Installing a drive .......................35

Installing a Rope Clip ......................38

Replacing the cover and connecting the cables .............38

Chapter 5. Installing internal options — microtower model .......41

Removing the cover .......................41

Locating components ......................42

Moving the power supply .....................42

Identifying parts on the system board ................45

Installing memory ........................45

Installing DIMMs .......................45

Installing adapters........................46

Installing internal drives ......................47

Drive specifications ......................48

Installing a drive .......................49

Installing a Rope Clip ......................52

Replacing the cover and connecting the cables .............52

Chapter 6. Updating the computer configuration ...........55

Verifying that an option is installed correctly ..............55

Configuring PCI adapters .....................56

Configuring startup devices ....................56

Erasing a lost or forgotten password (clearing CMOS) ..........56

Appendix A. Changing the battery .................59

Appendix B. Updating System Programs ..............61

System programs ........................61

Recovering from a POST/BIOS update failure .............61

Appendix C. System address maps ................63

System memory map ......................63

I/O address map ........................63

DMA I/O address map ......................65

Appendix D. Interrupt request and direct memory access channel

assignments ........................67

Appendix E. Notices and trademarks ................69

Television output notice ......................69

Trademarks ..........................70

Index ............................71

iv User Guide

Safety Information

DANGER

Electrical current from power, telephone, and communication cables is hazardous.

To avoid a shock hazard: v Do not connect or disconnect any cables or perform installation,

maintenance, or reconfiguration of this product during an electrical storm.

v Connect all power cords to a properly wired and grounded electrical outlet. v Connect to properly wired outlets any equipment that will be attached to

this product.

v When possible, use one hand only to connect or disconnect signal cables. v Never turn on any equipment when there is evidence of fire, water, or

structural damage. v Disconnect the attached power cords, telecommunications systems,

networks, and modems before you open the device covers, unless

instructed otherwise in the installation and configuration procedures. v Connect and disconnect cables as described in the following table when

installing, moving, or opening covers on this product or attached devices.

To connect:

1. Turn everything OFF.

2. First, attach all cables to devices.

3. Attach signal cables to connectors.

4. Attach power cords to outlet.

5. Turn device ON.

To disconnect:

1. Turn everything OFF.

2. First, remove power cords from outlet.

3. Remove signal cables from connectors.

4. Remove all cables from devices.

DANGER

Le courant électrique provenant de l’alimentation, du téléphone et des câbles de transmission peut présenter un danger.

Pour éviter tout risque de choc électrique : v Ne manipulez aucun câble et n’effectuez aucune opération d’installation,

d’entretien ou de reconfiguration de ce produit au cours d’un orage. v Branchez tous les cordons d’alimentation sur un socle de prise de courant

correctement câblé et mis à la terre.

v Branchez sur des socles de prise de courant correctement câblés tout

équipement connectéàce produit.

v Lorsque cela est possible, n’utilisez qu’une seule main pour connecter ou

déconnecter les câbles d’interface.; v Ne mettez jamais un équipement sous tension en cas d’incendie ou

d’inondation, ou en présence de dommages matériels. v Avant de retirer les carters de l’unité, mettez celle-ci hors tension et

déconnectez ses cordons d’alimentation, ainsi que les câbles qui la relient

aux réseaux, aux systèmes de té lécommunication et aux modems (sauf

instruction contraire mentionnée dans les procédures d’installation et de

configuration).

v Lorsque vous installez, que vous déplacez, ou que vous manipulez le

présent produit ou des périphériques qui lui sont raccordés, reportez-vous aux instructions ci-dessous pour connecter et déconnecter les différents cordons.

Connexion:

1. Mettez les unités hors tension.

2. Commencez par brancher tous les cordons sur les unités.

3. Branchez les câbles d’interface sur des connecteurs.

4. Branchez les cordons d’alimentation sur des prises.

5. Mettez les unités sous tension.

Lithium battery notice

CAUTION: Danger of explosion if battery is incorrectly replaced.

When replacing the battery, use only IBM Part Number 33F8354 or an equivalent type battery recommended by the manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of.

Do not:

v Throw or immerse into water v Heat to more than 100°C (212°F) v Repair or disassemble

Déconnexion:

1. Mettez les unités hors tension.

2. Débranchez les cordons d’alimentation des prises.

3. Débranchez les câbles d’interface des connecteurs.

4. Débranchez tous les câbles des unités.

Dispose of the battery as required by local ordinances or regulations.

ATTENTION

Danger d’explosion en cas de remplacement incorrect de la batterie.

Remplacer uniquement par une batterie IBM de type ou d’un type équivalent recommandé par le fabricant. La batterie contient du lithium et peut exploser en cas de mauvaise utilisation, de mauvaise manipulation ou de mise au rebut inappropriée.

Ne pas :

v Lancer ou plonger dans l’eau v Chauffer à plus de 100°C (212°F) v Réparer ou désassembler

Mettre au rebut les batteries usagées conformément aux règlements locaux.

Modem safety information

To reduce the risk of fire, electrical shock, or injury when using telephone equipment, always follow basic safety precautions, such as:

v Never install telephone wiring during a lightning storm.

vi User Guide

v Never install telephone jacks in wet locations unless the jack is specifically

designed for wet locations.

v Never touch uninsulated telephone wires or terminals unless the telephone line

has been disconnected at the network interface.

v Use caution when installing or modifying telephone lines. v Avoid using a telephone (other than a cordless type) during an electrical storm.

There may be a remote risk of electric shock from lightning.

v Do not use the telephone to report a gas leak in the vicinity of the leak.

Consignes de sécurité relatives au modem

Lors de l’utilisation de votre matériel téléphonique, il est important de respecter les consignes ci-après afin de réduire les risques d’incendie, d’électrocution et d’autres blessures :

v N’installez jamais de cordons téléphoniques durant un orage. v Les prises téléphoniques ne doivent pas être installées dans des endroits

humides, excepté si le modèle a été conçu à cet effet.

v Ne touchez jamais un cordon téléphonique ou un terminal non isolé avant que la

ligne ait été déconnectéeduréseau téléphonique.

v Soyez toujours prudent lorsque vous procédez à l’installation ou à la modification

de lignes téléphoniques.

v Si vous devez téléphoner pendant un orage, pour éviter tout risque de choc

électrique, utilisez toujours un téléphone sans fil.

v En cas de fuite de gaz, n’utilisez jamais un téléphone situéàproximité de la

fuite.

Laser compliance statement

Some IBM Personal Computer models are equipped from the factory with a CD-ROM drive or a DVD-ROM drive. CD-ROM drives and DVD-ROM drives are also sold separately as options. CD-ROM drives and DVD-ROM drives are laser products. These drives are certified in the U.S. to conform to the requirements of the Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class 1 laser products. Elsewhere, these drives are certified to conform to the requirements of the International Electrotechnical Commission (IEC) 825 and CENELEC EN 60 825 for Class 1 laser products.

When a CD-ROM drive or a DVD-ROM drive is installed, note the following handling instructions.

CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein might result in hazardous radiation exposure.

Removing the covers of the CD-ROM drive or DVD-ROM drive could result in exposure to hazardous laser radiation. There are no serviceable parts inside the CD-ROM drive or DVD-ROM drive. Do not remove the drive covers.

Some CD-ROM drives and DVD-ROM drives contain an embedded Class 3A or Class 3B laser diode. Note the following statement.

Safety Information vii

DANGER

Laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam.

DANGER:

Certains modèles d’ordinateurs personnels sont équipésd’origine d’une unité de CD-ROM ou de DVD-ROM. Mais ces unités sont également vendues séparément en tant qu’options. L’unité de CD-ROM/DVD-ROM est un appareil à laser. Aux État-Unis, l’unité de CD-ROM/DVD-ROM est certifiée conforme aux normes indiquées dans le sous-chapitre J du DHHS 21 CFR relatif aux produits à laser de classe 1. Dans les autres pays, elle est certifiée être un produit à laser de classe 1 conforme aux normes CEI 825 et CENELEC EN 60 825.

Lorsqu’une unité de CD-ROM/DVD-ROM est installée, tenez compte des remarques suivantes:

ATTENTION: Pour éviter tout risque d’exposition au rayon laser, respectez les consignes de réglage et d’utilisation des commandes, ainsi que les procédures décrites.

L’ouverture de l’unité de CD-ROM/DVD-ROM peut entraîner un risque d’exposition au rayon laser. Pour toute intervention, faites appel à du personnel qualifié.

Certaines unités de CD-ROM/DVD-ROM peuvent contenir une diode à laser de classe 3A ou 3B. Tenez compte de la consigne qui suit:

DANGER

Rayonnement laser lorsque le carter est ouvert. Évitez toute exposition directe des yeux au rayon laser. Évitez de regarder fixement le faisceau ou de l’observer à l’aide d’instruments optiques.

viii User Guide

About this book

This publication provides instructions for installing most options into your computer. This publication also includes an overview of computer features, locating connectors, and updating configuration settings.

How this book is organized

This book contains the following chapters and appendixes: v “Chapter 1, “Overview”“ provides an introduction to the computer specifications

and the options that are available for your computer.

v “Chapter 2, “Installing external options”“ provides information to orient you to the

connectors on your computer and instructions for installing external options and peripheral devices.

v “Chapter 3, “Installing internal options — small desktop model”“ provides

instructions for removing the cover and installing hard disk drives, memory, and adapters in your computer.

v “Chapter 4, “Installing internal options — desktop model”“ provides instructions

for removing the cover and installing hard disk drives, memory, and adapters in your computer.

v “Chapter 5, “Installing internal options — microtower model”“ provides instructions

for removing the cover and installing hard disk drives, memory, and adapters in your computer.

v “Chapter 6, “Updating the computer configuration”“ provides instructions for

updating the computer configuration, installing device drivers, and erasing a lost or forgotten password.

v “Appendix A, “Changing the battery”“provides instructions to help you change the

battery if you need to.

v “Appendix B, “Updating System Programs”“provides instructions to help you

update your system programs.

v “Appendix C, “System address maps”“ provides information for programmers

describing the address maps of the computer.

v “Appendix D, “Interrupt request and direct memory access channel assignments”“

provides information about the interrupt and direct memory access channel assignments.

v “Appendix E, “Notices and trademarks”“ contains notice and trademark

information.

Information resources

Access IBM, on your desktop, provides a link to more information about your computer.

See the Quick Reference that comes with your computer for basic troubleshooting, software recovery procedures, and information about where to call for help and service.

If you have Internet access, the most up-to-date manuals for your computer are available from the World Wide Web. To access this information, point your browser to:

http://www.pc.ibm.com/support

Type your machine type and model number in the Quick Path field, and click Go.

x User Guide

Chapter 1. Overview

Adding hardware options to your computer is an easy way to increase its capabilities. Instructions for installing external and internal options are included in this publication. When adding an option, use these instructions along with the instructions that come with the option.

This chapter provides a brief introduction to the options and features that are available for your computer. Also, important information about required tools, electrical safety, and static-sensitive devices is included.

Important

Before you install any option, read “Safety Information” on page v. These precautions and guidelines will help you work safely.

See Access IBM for general information about the use, operation, and maintenance of your computer. Access IBM also contains information to help you solve problems and get repair service or other technical assistance.

Identifying your computer

To properly install options, you will need to know the machine type/model of your computer. You can find this number on the small label on the front of your computer. An example of the machine type/model number is 6339xxx.

The information in this publication supports several computer types and models. The following illustrations will help you identify your computer.

Small desktop model computer

Note: The following illustration shows two types of small desktop model computers.

One model type has a door covering the drives.

Desktop model computer

1 3 9 4

2 User Guide

Microtower model computer

Features

This section provides an overview of the computer features, preinstalled software, and specifications.

Microprocessor

Pentium™III with 256 KB of internal L2 cache memory and MMX

Intel technology or an Intel Celeron™with 128 KB of internal L2 cache memory and MMX technology

™

Memory

v Support for two dual in-line memory modules (DIMMs) v 512 KB flash memory for system programs

Internal drives

v 3.5-inch, 1.44 MB diskette drive (some models) v Internal hard disk drive v EIDE CD drive or DVD drive (some models)

Video controller

Dynamic video memory technology

Audio subsystem

16-bit integrated Sound Blaster Pro compatible audio subsystem

Connectivity

v 10/100 Mbps integrated Intel ethernet controller that supports the Wake on LAN

feature

v Modem (some models)

System management features

v Remote Program Load (RPL) and Dynamic Host Configuration Protocol (DHCP) v Wake on LAN v Wake on Ring (in the Configuration/Setup Utility program, this feature is called

Serial Port Ring Detect for an external modem and Modem Ring Detect for an internal modem)

Chapter 1. Overview 3

v Remote Administration v Automatic power-on startup v System Management (SM) BIOS and SM software v Ability to store POST hardware test results

Input/output features

v 25-pin, Extended Capabilities Port (ECP)/Extended Parallel Port (EPP) v Two 9-pin serial connectors v Four 4-pin, USB connectors

v PS/2

mouse connector

v PS/2 keyboard connector v Ethernet connector v Monitor connector v Three audio connectors (line in, line out, and microphone) v Front connectors on some small desktops (S/PDIF, microphone, and headphone) v Front IEEE 1394 connector (some small desktop models)

Expansion

v Drive bays

– Small desktop model: Three – Desktop model: Four – Microtower model: Four

v 32-bit PCI expansion slots

– Small desktop model: Three (expansion cards must be low profile) – Desktop model: Three – Microtower model: Three

Power

v 95 W, 120 W, or 155 W power supply with manual voltage selection switch v Automatic 50/60 Hz input frequency switching v Advanced Power Management support v Advanced Configuration and Power Interface (ACPI) support

Security features

v Power-on and administrator passwords v Support for the addition of a Rope Clip and lockable cable (varies by mechanical

chassis)

v Startup sequence control v Startup without diskette drive, keyboard, or mouse v Unattended start mode v Diskette and hard disk I/O control v Serial and parallel port I/O control v Security profile by device

IBM preinstalled software

Your computer might come with preinstalled software. If it does, an operating system, device drivers to support built-in features, and other support programs are included.

4 User Guide

Operating systems (supported)

v Microsoft®Windows®Millennium Edition (Me) v Microsoft Windows 2000 Professional v Microsoft Windows 98 Second Edition

Specifications

Operating systems (tested for compatibility)

v Microsoft Windows 95

v Microsoft Windows NT

Workstation Version 4.0

v Microsoft Windows XP Personal

This section lists the physical specifications for your computer.

1. The operating systems listed here are being tested for compatibility at the time this publication goes to press. Additional operating systems might be identified by IBM as compatible with your computer following the publication of this booklet. Corrections and additions to this list are subject to change. To determine if an operating system has been tested for compatibility, check the Web site of the operating system vendor.

Chapter 1. Overview

Physical specifications — small desktop model

Dimensions

Height: 88 mm (3.4 in.) Width: 305 mm (12.0 in.) Depth: 380 mm (14.9 in.)

Weight

Minimum configuration as shipped: 8.2 kg (18 lb) Maximum configuration: 8.6 kg (19 lb)

Environment

Air temperature:

System on: 10° to 35° C(50° to 95° F) System off: 10° to 43° C(50° to 110° F)

Maximum altitude: 2134 m (7000 ft) Note: The maximum altitude, 2134 m (7000 ft), is the maximum altitude at which the specified air temperatures apply. At higher altitudes, the maximum air temperatures are lower than those specified.

Humidity:

System on: 8% to 80% System off: 8% to 80%

Electrical input

Input voltage:

Low range:

Minimum: 90 V ac Maximum: 137 V ac Input frequency range: 57–63 Hz Voltage switch setting: 115 V ac

High range:

Minimum: 180 V ac Maximum: 265 V ac Input frequency range: 47–53 Hz Voltage switch setting: 230 V ac

Input kilovolt-amperes (kVA) (approximate):

Minimum configuration as shipped: 0.085 kVA Maximum configuration: 0.120 kVA

Heat output (approximate) in British thermal units (Btu) per hour:

Minimum configuration: 187.8 Btu/hr (55 watts) Maximum configuration: 307.3 Btu/hr (90 watts)

Airflow

Approximately 0.25 cubic meters per minute (9 cubic feet per minute) maximum

Acoustical noise-emission values

Average sound-pressure levels:

At operator position:

Idle: 38 dBA Operating: 43 dBA

At bystander position - 1 meter (3.3 ft):

Idle: 33 dBA Operating: 37 dBA

Declared (upper limit) sound-power levels:

Idle: 3.75 bels Operating: 4.99 bels

Note: These levels were measured in controlled acoustical environments according to the procedures specified by the American National Standards Institute (ANSI) S12.10 and ISO 7779 and are reported in accordance with ISO 9296. Actual sound-pressure levels in a given location might exceed the average values stated because of room reflections and other nearby noise sources. The declared sound-power levels indicate an upper limit, below which a large number of computers will operate. Note: The computer is classified as a Class A or Class B digital device. See the Quick Reference for further information about this classification.

Note: Power consumption and heat output vary depending on the number and type of optional features installed and the power-management optional features in use.

6 User Guide

Physical specifications — desktop model

Dimensions

Height: 140 mm (5.5 in.) Width: 425 mm (16.7 in.) Depth: 425 mm (16.7 in)

Weight

Minimum configuration as shipped: 13.6 kg (30 lb) Maximum configuration: 11.3 kg (25.0 lb)

Environment

Air temperature:

System on: 10° to 35° C(50° to 95° F) System off: 10° to 43° C(50° to 110° F)

Humidity:

System on: 8% to 80% System off: 8% to 80%

Electrical input

Input voltage:

Low range:

Minimum: 90 V ac Maximum: 137 V ac Input frequency range: 57–63 Hz Voltage switch setting: 115 V ac

High range:

Minimum: 180 V ac Maximum: 265 V ac Input frequency range: 47–53 Hz Voltage switch setting: 230 V ac

Input kilovolt-amperes (kVA) (approximate):

Minimum configuration as shipped: 0.085 kVA Maximum configuration: 0.120 kVA

Heat output (approximate) in British thermal units (Btu) per hour:

Minimum configuration: 204.9 Btu/hr (60 watts) Maximum configuration: 307.3 Btu/hr (90 watts)

Airflow

Approximately 0.34 cubic meters per minute (12 cubic feet per minute) maximum

Acoustical noise-emission values

Average sound-pressure levels:

At operator position:

Idle: 38 dBA Operating: 43 dBA

At bystander position - 1 meter (3.3 ft):

Idle: 33 dBA Operating: 37 dBA

Declared (upper limit) sound-power levels:

Idle: 4.8 bels Operating: 5.1 bels

Note: Power consumption and heat output vary depending on the number and type of optional features installed and the power-management optional features in use.

Chapter 1. Overview 7

Physical specifications — microtower model

Dimensions

Height: 381 mm (15 in.) Width: 194 mm (7.6 in.) Depth: 381 mm (15 in.)

Weight

Minimum configuration as shipped: 9.1 kg (20 lb) Maximum configuration: 11.3 kg (25.0 lb)

Environment

Air temperature:

System on: 10° to 35° C(50° to 95° F) System off: 10° to 43° C(50° to 110° F)

Humidity:

System on: 8% to 80% System off: 8% to 80%

Electrical input

Input voltage:

Low range:

Minimum: 90 V ac Maximum: 137 V ac Input frequency range: 57–63 Hz Voltage switch setting: 115 V ac

High range:

Minimum: 180 V ac Maximum: 265 V ac Input frequency range: 47–53 Hz Voltage switch setting: 230 V ac

Input kilovolt-amperes (kVA) (approximate):

Minimum configuration as shipped: 0.085 kVA Maximum configuration: 0.120 kVA

Heat output (approximate) in British thermal units (Btu) per hour:

Minimum configuration: 204.9 Btu/hr (60 watts) Maximum configuration: 307.3 Btu/hr (90 watts)

Airflow

Approximately 0.5 cubic meters per minute (18 cubic feet per minute) maximum

Acoustical noise-emission values

Average sound-pressure levels:

At operator position:

Idle: 38 dBA Operating: 43 dBA

At bystander position - 1 meter (3.3 ft):

Idle: 33 dBA Operating: 37 dBA

Declared (upper limit) sound-power levels:

Idle: 4.8 bels Operating: 5.1 bels

Note: Power consumption and heat output vary depending on the number and type of optional features installed and the power-management optional features in use.

8 User Guide

Available options

The following are some available options:

v External options

v Internal options

For the latest information about available options, see the following World Wide Web pages:

v http://www.ibm.com/pc/us/options/ v http://www.pc.ibm.com/support/

– Parallel port devices, such as printers and external drives – Serial port devices, such as external modems and digital cameras – Audio devices, such as external speakers for the sound system – USB devices, such as printers, joysticks, and scanners – Security device, such as a Rope Clip – Monitors – IEEE 1394 devices, such as digital cameras

– System memory, called dual in-line memory modules (DIMMs) – Peripheral component interconnect (PCI) adapters – Internal drives, such as:

- CD drive or DVD drive

- Hard disk

- Diskette drives and other removable media drives

You can also obtain information by calling the following telephone numbers: v Within the United States, call 1-800-IBM-2YOU (1-800-426-2968), your IBM

reseller, or IBM marketing representative.

v Within Canada, call 1-800-565-3344 or 1-800-465-7999. v Outside the United States and Canada, contact your IBM reseller or IBM

marketing representative.

Tools required

To install some options in your computer, you might need a flat-blade or a Phillips screwdriver. Additional tools might be needed for certain options. See the instructions that come with the option.

Handling static-sensitive devices

Static electricity, although harmless to you, can seriously damage computer components and options.

When you add an option, do not open the static-protective package containing the option until you are instructed to do so.

When you handle options and other computer components, take these precautions to avoid static electricity damage:

v Limit your movement. Movement can cause static electricity to build up around

you.

v Always handle components carefully. Handle adapters and memory modules by

the edges. Never touch any exposed circuitry.

Chapter 1. Overview 9

v Prevent others from touching components. v When you install a new option, touch the static-protective package containing the

option to a metal expansion-slot cover or other unpainted metal surface on the computer for at least two seconds. This reduces static electricity in the package and your body.

v When possible, remove the option and install it directly in the computer without

setting the option down. When this is not possible, place the static-protective package that the option came in on a smooth, level surface and place the option on it.

v Do not place the option on the computer cover or other metal surface.

10 User Guide

Chapter 2. Installing external options

This chapter shows the various external connectors on your computer to which you can attach external options, such as external speakers, a printer, or a scanner. For some external options, you must install additional software in addition to making the physical connection. When adding an external option, use the information in this chapter to identify the required connector, and then use the instructions that come with the option to help you make the connection and install any software or device drivers that are required for the option.

Important

Before you install or remove any option, read “Safety Information” on page v. These precautions and guidelines will help you work safely.

Locating the connectors on the front of your computer

The following illustrations show the location of the connectors on the front of the small desktop computers.

1 3 9 4

1IEEE 1394 connector (some models) 4S/PDIF connector 2Front USB connector 5Microphone connector 3Front USB connector 6Headphone connector

1Front USB connector 2Front USB connector

The following illustration shows the location of the connectors on the front of the desktop computer.

1Front USB connector 2Front USB connector

The following illustration shows the location of the connectors on the front of the microtower computer.

1Front USB connector 2Front USB connector

12 User Guide

Locating the connectors on the rear of your computer

The following illustration shows the location of the connectors on the rear of the small desktop model computer.

1Mouse connector 8 Audio line in connector 2Parallel connector 9 Audio line out connector 3Ethernet connector 10USB connectors 4Serial connector 11Monitor connector 5Power connector 12Serial connector 6PCI slots 13Keyboard connector 7Microphone connector

Note: The connectors on the rear of the computer have color-coded icons to help

you to determine where to connect the cables on your computer.

Chapter 2. Installing external options 13

The following illustration shows the location of the connectors on the rear of the desktop model computer.

1Power connector 8Audio line in connector 2Mouse connector 9Audio line out connector 3Parallel connector 10USB connectors 4Ethernet connector 11Monitor connector 5Serial connector 12Serial connector 6PCI slots 13Keyboard connector 7Microphone connector

Note: The connectors on the rear of the computer have color-coded icons to help

you to determine where to connect the cables on your computer.

14 User Guide

+ 60 hidden pages

IBM NetVista 6336, NetVista 6337, NetVista 6341, NetVista 6342, NetVista 6346 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual