TOSHIBA L350/L350D Portable Personal Computer User’s Manual
First edition February 2008
Copyright authority for music, movies, computer programs, data bases and
other intellectual property covered by copyright laws belongs to the author
or to the copyright owner. Copyrighted material can be reproduced only for
personal use or use within the home. Any other use beyond that stipulated
above (including conversion to digital format, al teration, transfer of copied
material and distribution on a network) without the permission of the
copyright owner is a violation of copyright or author’s rights and is subject
to civil damages or criminal action. Please comply with copyright laws in
making any reproduction from this manual.
This manual has been validated and reviewed for accuracy. The
instructions and descriptions it contains are accurate for the TOSHIBA
L350/L350D Portable Personal Computer at the time of this manual’s
production. However, succeeding computers and manuals are subject to
change without notice. TOSHIBA assumes no liability for damages incurred
directly or indirectly from errors, omissions or discrepancies between the
computer and the manual.
Trademarks
IBM is a registered trademark, and IBM PC and PS/2 are trademarks of
International Business Machines Corporation.
Intel, Intel SpeedStep and Intel Core and Centrino are trademarks or
registered trademarks of Intel Corporation or its subsidiaries in the United
States and other countries/regions.
AMD, the AMD Arrow logo, AMD Athlon, AMD Turion, Radeon, and
combinations thereof, ATI Mobility Radeon are trademarks of Advanced
Micro Devices, Inc.
Windows and Microsoft are registered trademarks and Windows Vista is a
trademark of Microsoft Corporation.
Photo CD is a trademark of Eastman Kodak.
Memory Stick is a registered trademark and i.LINK is a trademark of
SonyCorporation.
iiUser’s Manual
DVD MovieFactory is a trademark of the Ulead Systems. Inc.
Labelflash™ is a trademark of YAMAHA CORPORATION.
Manufactured under license from Digital Theater Systems, Inc. U.S. Pat.
No’s. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535
and other U.S. and world-wide patents issued and pending. “DTS” and
“DTS Digital Surround” are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2003 Digital Theater Systems, Inc. All Rights
Reserved.
Other trademarks and registered trademarks not listed above may be used
in this manual.
Safety instructions
Use the following safety guidelines to help to protect yourself and your
computer.
When using your computer
Do not operate your portable computer for an extended period of time with
the base resting directly on your body. With extended operation, heat can
potentially build up in the base. Allowing sustained contact with the skin
could cause discomfort or, eventually, a burn.
■ Do not attempt to service the computer yourself. Always follow
installation instructions closely.
■ Do not carry a battery in your pocket, purse, or other container where
metal objects (such as car keys) could short-circuit the battery
terminals. The resulting excessive current follow can cause extremely
high temperatures and may result in damage from burns.
■ Be sure that noting rests on your AC adaptor’s power cable and that the
cable is not located where it can be tripped over or stepped on.
■ Place the AC adaptor in a ventilated area, such as a desk top or on the
floor, when you use it to run the computer or to charge the battery. Do
not cover the AC adaptor with papers or other items that will reduce
cooling; also, do not use the AC adaptor while it is inside a carrying
case.
■ Use only the AC adaptor and batteries that are approved for use with
this computer. Use of another type of battery or AC adaptor may risk fire
or explosion.
■ Before you connect the computer to a power source, ensure that the
voltage rating of the AC adaptor matches that of the available power
source. 115 V/60 Hz in most of North and South America and some Far
Eastern countries such as Taiwan. 100 V/50 Hz in eastern Japan and
100 V/60 Hz in western Japan. 230 V/50 Hz in most of Europe, the
Middle East, and the Far East.
L350/L350D
User’s Manualiii
L350/L350D
■ If you use an extension cable with your AC adaptor, ensure that the total
ampere rating of the products plugged in to the extension cable does
not exceed the ampere rating of the extension cable.
■ To remove power from the computer, turn it off, remove the battery, and
disconnect the AC adaptor from the electrical outlet.
■ To help avoid the potential hazard of electric shock, do not connect or
disconnect any cables or perform maintenance or reconfiguration of this
product during an electrical storm.
■ When setting up the computer for work, place it on a level surface.
EU Declaration of Comformity
Supplementary Information:The product complies with the requirements Of
the Low Voltage Directive 2006/95/EC,the EMC Directive 2004/108/EC
and/or the R&TTE Directive 1999/5/EC.”
This product is carrying the CE-Mark in accordance with the related
European Directives. The party responsible for CE-Marking is TOSHIBA
Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany.
The complete and official EU Declaration of Confirmity can be found on
TOSHIBA’s web site http://epps.toshiba-teg.com on the Internet.
GOST
Modem warning notice
Conformity statement
The equipment has been approved to [Commission Decision “CTR21”] for
pan-European single terminal connection to the Public Switched Telephone
Network (PSTN).
However, due to differences between the individual PSTNs provided in
different countries/regions the approval does not, of itself, give an
unconditional assurance of successful operation on every PSTN network
termination point.
In the event of problems, you should contact your equipment supplier in the
first instance.
ivUser’s Manual
Network compatibility statement
This product is designed to work with, and is compatible with the following
networks. It has been tested to and found to conform with the additional
requirements conditional in EG 201 121.
GermanyATAAB AN005,AN006,AN007,AN009,AN010
and DE03,04,05,08,09,12,14,17
GreeceATAAB AN005,AN006 and GR01,02,03,04
Portugal ATAAB AN001,005,006,007,011 and
P03,04,08,10
Spain ATAAB AN005,007,012, and ES01
SwitzerlandATAAB AN002
All other countries/regions ATAAB AN003,004
Specific switch settings or software setup is required for each network,
please refer to the relevant sections of the user guide for more details.
The hookflash (timed break register recall) function is subject to separate
national type approvals. It has not been tested for conformity to national
type regulations, and no guarantee of successful operation of that specific
function on specific national networks can be given.
Following information is only for EU-member States
The symbol indicates that this product may not be treated as household
waste. Please ensure this product is properly disposed as inappropriate
waste handling of this product may cause potential hazards to the environment and human health.
For more detailed information about recycling of this product, please
contact your local city office, your household waste disposal service or the
shop where you purchased the product.
L350/L350D
This symbol may not stick depending on the country and region where you
purchased..
User’s Manualv
L350/L350D
ENERGY STAR® Program
Y our computer model may be ENERGY STAR® Compliant. If the model you
purchased is compliant, it is labeled with the ENERGY STAR
computer and the following information applies.
TOSHIBA is a partner in the Environmental Protection Agency’s (EPA)
ENERGY STAR
latest ENERGY STAR
®
Program and has designed this computer to meet the
®
guidelines for energy efficiency. Your computer
ships with the power management options preset to a configuration that will
provide the most stable operating environment and optimum system
performance for both AC power and battery modes.
To conserve energy, your computer is set to enter the low-power Sleep
mode which shuts down the system and display within 15 minutes of
inactivity in AC power mode. TOSHIBA recommends that you leave this
and other energy saving features active, so that your computer will operate
at its maximum energy efficiency. You can wake the computer from Sleep
mode by pressing the power button.
Products that earn the ENERGY STAR
by meeting strict energy efficiency guidelines set by the US EPA and the EU
Commission. According to the EPA, a computer meeting the new ENERGY
®
STAR
specifications will use between 20% and 50% less energy
depending on how it is used.
Visit http://www.eu-energystar . org or http:// www.energystar.gov for more
information regarding the ENERGY STAR Program.
Optical disc drive standards
TOSHIBA L350/L350D computer is shipped with one of the following drives
preinstalled: DVD Super Multi (± R DL), DVD Super Multi (± R DL) /w Label
Flash or HD DVD-ROM.
®
logo on the
®
prevent greenhouse gas emissions
■ The drive employs a laser system. To ensure proper use of this
product, please read this instruction manual carefully and retain for
future reference.
Should the unit ever require maintenance, contact an authorized
service location.
■ Use of controls, adjustments or the performance of procedures other
than those specified may result in hazardous radiation exposure
■ To prevent direct exposure to the laser beam, do not try to open the
enclosure.
viUser’s Manual
L350/L350D
The drive has one of the following labels:
CLASS 1 LASER PRODUCT
LASER KLASSE 1
LUOKAN 1 LASERLAITE
APPAREIL A LASER DE CLASSE1
KLASS 1 LASER APPARAT
Before it is shipped, the Class 1 Laser is certified to meet the United States
Chapter 21 S tandards of the Department of Health and Human Services
(DHHS 21 CFR).
For any other country, the drive is certified to meet the Class 1 Laser
standards of IEC825 and EN60825.
This computer is equipped with one of the optical drives in the following list:
ManufacturerType
PanasonicDVD Super Multi (± R Double Layer)
UJ-870B/UJ-870F
HitachiDVD Super Multi (± R Double Layer)
GSA-T40N/GSA-T40F
PioneerDVD Super Multi (± R Double Layer)
DVR-KD08TBM/DVR-KD08TBF
Toshiba SamsungDVD Super Multi (± R Double Layer)
TS-L632H/TS-L632P
ToshibaHD DVD ROM
SD-L802B
User’s Manualvii
L350/L350D
Important notice
Copyrighted works including, but not limited to, music, video, computer
programs, databases are protected by copyright laws. Unless specifically
permitted under applicable copyright laws, you cannot copy, modify, assign,
transmit or otherwise dispose of any copyrighted work with the consent of
the owner of the copyright. Please take notice that unauthorized copying,
modification, assignment, transmission and disposition may be subject to
claims for damages and penalties.
■ Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
■ Do not use the telephone to report a gas leak in the vicinity of the leak.
■ Use only the power cord indicated in this manual.
■ Replace only with the same or equivalent type battery recommended by
the manufacturer.
■ Dispose of used batteries according to the manufacturer’s instructions.
Use only the battery pack that came with the computer or an optional
battery pack. Use of wrong battery could damage your computer.
TOSHIBA assumes no liability for any damage in such case.
Appendix A Specifications
Appendix B Display Controller and Modes
Appendix C Wireless LAN
Appendix D AC Power Cord and Connectors
Appendix E If your computer is stolen
L350/L350D
Glossary
Index
User’s Manualxi
L350/L350D
xiiUser’s Manual
Preface
Congratulations on your purchase of the TOSHIBA L350/L350D computer.
This powerful, lightweight notebook computer is designed to provide years
of reliable, high-performance computing.
This manual tells how to set up and begin using your TOSHIBA L350/
L350D computer. It also provides detailed information on configuring your
computer, basic operations and care, using optional devices and
troubleshooting.
If you are a new user of computers or if you’re new to portable computing,
first read over the Introduction and The Grand Tour chapters to familiarize
yourself with the computer’s features, components and accessory devices.
Then read Getting Started for step-by-step instructions on setting up your
computer.
If you are an experienced computer user, please continue reading the
preface to learn how this manual is organized, then become acquainted
with this manual by browsing through its pages. Be sure to read the Special
features section of the Introduction, to learn about features that are
uncommon or unique to the computers and carefully read HW Setup and
Passwords, If you are going to install ExpressCards or connect external
devices such as a printer, be sure to read Chapter 8,Optional Devices.
L350/L350D
Manual contents
This manual is composed of the following chapters, appendixes, a glossary
and an index.
Chapter 1, Introduction, is an overview of the computer’s features,
capabilities, and options.
Chapter 2, The Grand T our, identifies the components of the computer and
briefly explains how they function.
Chapter 3, Getting Started, provides a quick overview of how to begin
operating your computer.
Chapter 4, Operating Basics, includes tips on care of the computer and on
using the touchpad, optical disc drive, external diskette drive, Wireless
LAN, LANs, Audio/Video controls, and internal modem.
Chapter 5, The Keyboard, describes special keyboard functions including
the keypad overlay and hot keys.
User’s Manualxiii
L350/L350D
Chapter 6, Power and Power-up Modes, gives details on the computer’s
power resources and battery save modes.
Chapter 7, HW Setup and Passwords, explains how to configure the
computer using the HW Setup program. It also tells how to set a password.
Chapter 8, Optional Devices, describes the optional hard ware available.
Chapter 9, Troubleshooting, provides helpful information on how to perform
some diagnostic tests, and suggests courses of action if the computer
doesn’t seem to be working properly.
Chapter 10 Disclaimers, provides Legal Footnotes information related to
your computer.
The Appendixesprovide technical information about your computer.
The Glossary defines general computer terminology and includes a list of
acronyms used in the text.
The Index quickly directs you to the information contained in this manual.
Conventions
This manual uses the following formats to describe, identify, and highlight
terms and operating procedures.
Abbreviations
On first appearance, and whenever necessary for clarity, abbreviations are
enclosed in parentheses following their definition. For example: Read Only
Memory (ROM). Acronyms are also defined in the Glossary.
Icons
Icons identify ports, dials, and other parts of your computer. The indicator
panel also uses icons to identify the components it is providing information
on.
Keys
The keyboard keys are used in the text to describe many computer
operations. A distinctive typeface identifies the key top symbols as they
appear on the keyboard. For example, ENTER identifies the Enter key.
Key operation
Some operations require you to simultaneously use two or more keys.
We identify such operations by the key top symbols separated by a plus
sign (+). For example, CTRL + C means you must hold down CTRL and at
the same time press C. If three keys are used, hold down the first two and
at the same time press the third.
ABCWhen procedures require an action such as clicking an icon
xivUser’s Manual
or entering text, the icon’s name or the text you are to type
in is represented in the typeface you see to the left.
Display
ABCNames of windows or icons or text generated by the
computer that appear on its display screen are presented in
the typeface you see to the left.
Messages
Messages are used in this manual to bring important information to your
attention. Each type of message is identified as shown below.
Pay attention! A caution informs you that improper use of equipment or
failure to follow instructions may cause data loss or damage your
equipment.
Please read. A note is a hint or advice that helps you make best use of
your equipment.
Terminology
This term is defined in this document as follows:
L350/L350D
Start
The word “Start” refers to the “” button in
®
Microsoft
Windows Vista™.
User’s Manualxv
L350/L350D
xviUser’s Manual
General Precautions
TOSHIBA computers are designed to optimize safety, minimize strain and
withstand the rigors of portability. However, certain precautions should be
observed to further reduce the risk of personal injury or damage to the
computer.
Be certain to read the general precautions below and to note the cautions
included in the text of the manual.
Creating a computer-friendly environment
Place the computer on a flat surface that is large enough for the computer
and any other items you are using, such as a printer.
Leave enough space around the computer and other equipment to provide
adequate ventilation. Otherwise, they may overheat.
T o keep your computer in prime operating condition, protect your work area
from:
■ Dust, moisture, and direct sunlight.
■ Equipment that generates a strong electromagnetic field, such as
stereo speakers(other than speakers that are connected to the
computer) or speakerphones.
■ Rapid changes in temperature or humidity and sources of temperature
change such as air conditioner vents or heaters.
■ Extreme heat, cold, or humidity.
■ Liquids and corrosive chemicals.
L350/L350D
Stress injury
Carefully read the Instruction Manual for Safety and Comfort. It contains
information on the prevention of stress injuries to your hands and wrists
that can be caused by extensive keyboard use.
User’s Manualxvii
L350/L350D
Heat injury
■ Avoid prolonged physical contact with the computer. If the computer is
used for long periods, its surface can become very warm. While the
temperature will not feel hot to the touch, if you maintain physical
contact with the computer for a long time, for example if you rest the
computer on your lap or if you keep your hands on the palm rest, your
skin might suffer a low-heat injury.
■ If the computer has been used for a long time, avoid direct contact with
the metal plate supporting the various interface ports as this can
become hot.
■ The surface of the AC adaptor can become hot when in use but this
condition does not indicate a malfunction. If you need to transport the
AC adaptor, you should disconnect it and let it cool before moving it.
■ Do not lay the AC adaptor on a material that is sensitive to heat as the
material could become damaged.
Pressure or impact dama ge
Do not apply heavy pressure to the computer or subject it to any form of
strong impact as this can damage the computer’s components or otherwise
cause it to malfunction.
ExpressCard overheating
Some ExpressCards can become hot during prolonged use which may
result in errors or instability in the operation of the device in question.
In addition, you should also be careful when you remove an ExpressCard
that has been used for a long time.
Mobile phones
Please be aware that the use of mobile phones can interfere with the audio
system. The operation of the computer will not be impaired in any way, but
it is recommended that a minimum distance of 30cm is maintained between
the computer and a mobile phone that is in use.
Instruction Manual for Safety and Comfort
All important information on the safe and proper use of this computer is
described in the enclosed Instruction Manual for Safety and Comfort.
Be sure to read it before using the computer.
xviiiUser’s Manual
Introduction
This chapter provides an equipment checklist, and it identifies the
computer’s features, options and accessories.
Some of the features described in this manual may not function properly if
you use an operating system that was not preinstalled by TOSHIBA.
Equipment checklist
Carefully unpack your computer. Save the box and packaging materials for
future use.
Hardware
Check to make sure you have all the following items:
■ TOSHIBA L350/L350D Portable Personal Computer
■ Universal AC adaptor and power cord
L350/L350D
Chapter 1
Software
Microsoft® Windows Vista™
■ The following software is preinstalled:
®
■ Microsoft
■ Ulead DVD MusicFactory® for TOSHIBA
■ TOSHIBA DVD PLAYER (Is preinstalled with some models)
■ TOSHIBA HD DVD PLAYER (Is preinstalled with HD DVD-ROM
drive model)
■ TOSHIBA Value Added Package
■ TOSHIBA Face Recognition(Is preinstalled with some models)
■ TOSHIBA Assist
■ TOSHIBA HW Setup utility
■ TOSHIBA ConfigFree
■ TOSHIBA Disc Creator
■ Online Manual
User’s Manual1-1
Windows Vista™
L350/L350D
Documentation
Features
Processor
Memory
■ TOSHIBA L350/L350D User’s Manual
■ TOSHIBA L350/L350DQuickstart
■ Instruction Manual for Safety and Comfort
■ Warranty information
If any of the items are missing or damaged, contact your dealer
immediately.
This computer incorporates the following features and benefits:
Built-inPlease visit your region’s website for the
configuration details of the model that you have
purchased.
SlotsPC2-5300 512 MB, 1024 MB or 2048 MB
memory modules can be installed in the two
memory slots. Maximum system memory size
and speed depend on the model you purchased.
PC2-5300 memory module works as PC2-4200
speed on GL960 Express chipset.
Video RAMDepending on the model you purchased.
Mobile Intel
Mobile Intel® GL960 Express Chipset:
Video RAM capacity shares with main memory,
and the proportion depends on Dynamic Video
Memory Technology.
ATI Radeon™ X1250 model:
Video RAM capacity shares with main memory,
and the proportion depends on ATI
HyperMemory™.
1-2User’s Manual
®
GM965 Express Chipset:
If your computer is configured with two 2GB memory modules, the memory
might be displayed as approximately 3GB only (depending on the
computer's hardware specifications).
This is correct because the operating system usually displays the available
memory instead of the physical memory (RAM) built into the computer.
Various system components (like the video adapter's GPU and PCI
devices like Wireless LAN, etc.) requi re th ei r ow n memo ry space. Since a
32-bit operating system cannot address more than 4 GB of memory these
system resources overlap the physical memory. It is a technical limitation
that the overlapped memory is not available to the operating system.
Even though some tools might display the actual physical memory built
into your computer, the memory available to the operating system will still
be approximately 3 GB only.
Disks
L350/L350D
Hard disk drive
(HDD)
The computer is equipped with one of the
following hard disk drive types. It comes in the
following sizes:
■ 80 GB
■ 120 GB
■ 160 GB
■ 200 GB
■ 250 GB
■ 300 GB
■ 320 GB
■ 400 GB
■ 500 GB
For more information on the Disclaimer regarding
Hard disk drive capacity, please refer to the
Disclaimers section in Chapter 10.
User’s Manual1-3
L350/L350D
DVD Super Multi
(± R DL) drive
Some models are equipped with a full-size DVD
Super Multi (± R DL) drive module that allows
you to record data to rewritable CD/DVDs as well
as run CD/DVDs without using an adaptor. It
reads DVD-ROMs at maximum 8 speed and
CD-ROMs at maximum 24 speed. It writes CD-R
at up to 24 speed, CD-RW at up to 16 speed,
DVD-R at up to 8 speed, DVD-RW at up to 6
speed, DVD-RAM at up to 5 speed, DVD+R at up
to 8 speed, DVD+RW at up to 8 speed, DVD+R
DL at up to 4 speed and DVD-R DL at up to
4 speed. This drive supports the following
formats:
■ DVD-ROM
■ DVD-Video
■ DVD-R
■ DVD-RW
■ DVD+R
■ DVD+RW
■ DVD-RAM
■ DVD+R DL
■ DVD-R DL
■ CD-DA
■ CD-Text
■ CD-ROM Mode 1, Mode 2
■ CD-ROM XA Mode 2 (Form1, Form2)
■ CD-G (Audio CD only)
■ Photo CD (single/multi-session)
■ Enhanced CD (CD-EXTRA)
■ Addressing Method 2
1-4User’s Manual
L350/L350D
HD DVD-ROM driveSome models are equipped with a full-size
HD DVD-ROM drive module that allows you to
run CD/DVD/HD DVDs without using an adaptor.
The drive reads DVD-ROMs at a maximum 8x
speed, CD-ROMs at a maximum 24x speed, and
HD DVDs at a maximum 1x speed. It writes
CD-Rs at up to 16x speed, CD-RWs at up to 10x
speed, DVD-Rs and DVD+Rs at up to 4x speed,
DVD-RWs and DVD+RWs at up to 4x speed,
DVD-R DL at up to 2x speed, DVD+R DL at up to
2.4x speed and DVD-RAM at up to 3x speed.
This drive supports the following formats:
■ CD-R
■ CD-RW
■ CD-DA
■ CD-Text
■ CD-ROM Mode 1, Mode 2
■ CD-ROM XA Mode 2 (Form1, Form2)
■ Photo CD (single/multi-session)
■ Enhanced CD (CD-EXTRA)
■ Addressing Method 2
■ DVD-ROM
■ DVD-Video
■ DVD-R
■ DVD-R DL
■ DVD-RW
■ DVD+R
■ DVD+R DL
■ DVD+RW
■ DVD-RAM
■ HD DVD-ROM
Keyboard
Built-in
104 keys or 105 keys, compatible with IBM
enhanced keyboard, and keys. See
Chapter 5, The Keyboard, for details.
User’s Manual1-5
®
L350/L350D
Pointing device
Power
Built-inA touchpad and control buttons in the palm rest
enable control of the on-screen pointer.
Battery packThe computer is powered by one rechargeable
lithium-ion battery pack.
RTC batteryThe internal RTC battery backs up the Real Time
AC adaptorThe universal AC adaptor provides power to the
Clock (RTC) and calendar.
system and recharges the batteries when they
are low. It comes with a detachable power cord.
Because it is universal, it can receive a range of
AC voltage between 100 and 240 volts.
Ports
HeadphoneEnables connection of a stereo headphone.
MicrophoneEnables connection of a microphone.
External monitor15-pin, analog VGA port.
Universal Serial Bus
(USB 2.0)
HDMI (optional)This HDMI jack allows you to connect external
Three Universal Serial Bus (USB ports) enable a
chain connection of USB-equipped devices to
your computer through the ports.
display/audio devices. (Provided with some
models)
Slots
Multiple digital
media card slot
(optional)
This slot allows you to easily transfer data from
devices, such as digital cameras and Personal
Digital Assistants, that use flash memory (SD/
SDHC/MS/MS Pro/MMC memory cards).
(Provided with some models)
ExpressCard slotExpressCard slot allows you to install an
1-6User’s Manual
ExpressCard™/34 or Expres Card™/54 to
expand functionality. See Chapter 8, Optional
Devices, for details.
Multimedia
L350/L350D
Web camera
(optional)
Sound systemWindows Sound System compatible sound
Record/Send still or video images with this
integrated web camera. (Provided with some
models)
system provides internal speaker as well as jacks
for an external microphone and headphone.
It also has a volume control dial.
Communications
LANThe computer is equipped with a LAN card that
supports Ethernet LAN (10 Mbit/s, 10BASE-T) or
Fast Ethernet LAN (100 Mbit/s, 100BASE-TX).
It is preinstalled as a standard device in some
markets.
Wireless LANA Wireless LAN mini card is equipped with other
ModemSome models are equipped with an integrated
LAN systems based on Direct Sequence Spread
Spectrum/Orthogonal Frequency Division
Multiplexing radio technology that complies with
the IEEE 802.11 Standard (Revision A, B, G and
draft N).
Roaming over multiple channels.
(Provided with some models)
modem. The integrated modem provides
capability for data and fax communications that
support the V.90 (V.92) standards and includes a
modem jack for connection to the telephone line.
Please note that both the V.90 and V.92
standards are only supported in the USA,
Canada, United Kingdom, France, Germany and
Australia - only the V.90 standard is supported in
other regions. You should also be aware that the
speed of data and fax transfer will depend on the
analog telephone line conditions. (Provided with
some models)
Wireless
communication
switch
User’s Manual1-7
This switch turns wireless devices RF
transmission(Wireless LAN) function on and off.
(Provided with some models)
L350/L350D
Security
Security lock slotConnects a security lock to anchor the computer
Software
Operating systemMicrosoft® Windows Vista™ is available. Refer to
TOSHIBA UtilitiesA number of utilities and drivers are preinstalled
Plug and PlayWhen you connect an external device to the
Special features
to a desk or other large object.
the preinstalled Software section at the front of
this chapter.
to make your computer more convenient to use.
Refer to the Utilities and applications section in
this chapter.
computer or when you install a component,
Plug and Play capability enables the system to
recognize the connection and make the
necessary configurations automatically.
The following features are either unique to TOSHIBA computers or are
advanced features which make the computer more convenient to use.
To access the Power Options, click Start -> Control Panel -> System and
Maintenance -> Power Options.
Hot keysKey combinations allow you to quickly modify the
system configuration directly from the keyboard
without running a system configuration program.
Display automatic
power off
HDD automatic
power off
System automatic
Sleep/Hibernation
1-8User’s Manual
This feature automatically cuts off power to the
internal display when there is no keyboard input
for a specified time. Power is restored when any
key is pressed. This can be specified in the
Power Options.
This feature automatically cuts off power to the
hard disk drive when it is not accessed for a time
specified. Power is restored when the hard disk
is accessed. This can be specified in the Power
Options.
This feature automatically shuts down the system
in sleep mode or hibernation mode when there is
no input or hardware access for a time specified.
This can be specified in the Power Options.
L350/L350D
Power-on passwordTwo levels of password security, supervisor and
user, are available to prevent unauthorized
access to your computer.
Instant securityA hot key function blanks the screen and
disables the computer providing data security.
Intelligent power
supply
A microprocessor in the computer’s intelligent
power supply detects the battery’s charge and
calculates the remaining batter y capacity. It also
protects electronic components from abnormal
conditions, such as voltage overload from an AC
adaptor. This can be specified in the Power
Options.
Battery save mode This feature allows you to configure the computer
in order to save battery power. This can be
specified in the Power Options.
Panel power on/off This feature turns power to the computer off
when the display panel is closed and turns it
back on when the panel is opened. This can be
specified in the Power Options.
Low battery
automatic
hibernation mode
When battery power is exhausted to the point
that computer operation cannot be continued, the
system automatically enters hibernation or shuts
down. This can be specified in the Power
Options.
Heat dispersal To protect from over heating, the CPU has an
internal temperature sensor. If the computer’s
internal temperature rises to a certain level, the
cooling fan is turned on or the processing speed
is lowered. This can be specified in the Power
Options.
Maximum
Performance
Turns on fan first, then if
necessary lowers CPU
processing speed.
Battery
Optimized
Lowers the CPU processing
speed first, then if necessary
turns on the fan.
User’s Manual1-9
L350/L350D
HibernationThis feature allows you to turn off the power
without exiting from your software. The contents
of main memory are saved to the hard disk, when
you turn on the power again, you can continue
working right where you left off. Refer to the
Turning off the power section in Chapter 3,
Getting Started, for details
SleepIf you have to interrupt your work, you can turn
off the power without exiting from your software.
Data is maintained in the computer’s main
memory. When you turn on the power again, you
can continue working right where you left off.
TOSHIBA Value Added Package
This section describes the TOSHIBA Component features preinstalled on
the computer.
TOSHIBA
Power Option
TOSHIBA
Button Support
TOSHIBA
Zooming Utility
TOSHIBA
PC Diagnostic Tool
TOSHIBA
Flash Cards
TOSHIBA Power Option provides you wi t h th e
features of more various power supply
managements.
This utility controls the following computer button
functions.
■ Mute button
■ CD/DVD/HD DVD button
The starting application from the button can be
changed.
This utility allows you to enlarge or reduce the
icon size on the Windows Desktop, or the zoom
factor associated with specific supported
applications.
The TOSHIBA PC Diagnostic Tool will display
basic system configuration information and allow
the functionality of some of the computer’s builtin hardware devices to be tested.
This utility supports the following functions.
■ Hot key function
■ TOSHIBA utility launcher function
1-10User’s Manual
L350/L350D
■ When you start or resume your computer, the TOSHIBA Flash Cards
may take a moment to become available and may display several times
before completely activating. The hot key functions will be available
once the TOSHIBA Flash Cards are completely active.
■ If your system is busy and you see a [Not Responding] message,
allow TOSHIBA Flash Cards to completely activate before you continue
to use the utility and hot keys.
TOSHIBA
Accessibility
Utilities and applications
This section describes preinstalled utilities and tells how to start them.
For details on operation, refer to each utility’s online manual, help files or
readme.txt files.
TOSHIBA AssistTOSHIBA Assist is a graphical user interface that
HW Setup utilityTo start the utility, click the Windows St art button,
TOSHIBA
DVD PLAYER
The TOSHIBA Accessibility utility provides
support to movement impaired users when they
need to use the TOSHIBA hot key functions. In
use, the utility allows you to make the FN key
“sticky”, that is you can press it once, release it,
and then press one of the “F” keys in order to
access its specific function. When set, the FN
key will remain active until another key is
pressed.
provides easy access to help and services.
point to All Programs, click TOSHIBA, click
Utilities, and select HWSetup icon.
This software is provided for playback of DVD
Video.
(This software is preinstalled with DVD Super
Multi (± R DL) drive model.)
TOSHIBA
HD DVD PLAYER
User’s Manual1-11
This software is provided for playba ck of
HD DVD Video and DVD Video.
(This software is preinstalled with HD DVD-ROM
drive model.)
L350/L350D
TOSHIBA
Disc Creator
Ulead DVD
MovieFactory
®
for
TOSHIBA
TOSHIBA
ConfigFree
TOSHIBA
Face Recognition
You can create CD/DVDs in several formats
including audio CDs that can be played on a
standard stereo CD player and data CD/DVDs to
store the files and folderson your hard disk drive.
This software can be used on a model with
CD-RW/DVD-ROM drive, DVD Super Multi (± R
DL) drive, HD DVD-ROM and HD DVD-RW drive.
You can boot TOSHIBA Disc Creator from the
menu bar as follows.
Y ou can edit di gital video and make a DVD-V ideo
and support Labelflash function.
ConfigFree is a suite of utilities to allow easy
control of communication devices and network
connections. ConfigFree also allows you to find
communication problems and create profiles for
easy switching between location and
communication networks.
You can boot ConfigFree from the menu bar as
follows.
Start -> All Programs -> TOSHIBA ->
ConfigFree
TOSHIBA Face Recognition uses a face
verification library to verify the face data of users
when they log into Windows. If the verification is
successful, user will logged into Windows
automatically, and thus avoid having to enter a
password or the like, which makes the login
process easier.
Windows
Mobility Center
This section describes the Windows Mobility
Center.
Mobility Center is a utility for accessing several
mobile PC settings quickly in one window. A
default maximum of eight tiles are provided by
the operating system, and the additional two tiles
are added to your Mobility Center.
■ Lock Computer: This can be used to lock
your computer without turning it off. This has
the same function as the Lock button at the
bottom of the right pane in the start menu.
■ TOSHIBA Assist: This can be used to open
TOSHIBA Assist if it is already installed in
your computer.
1-12User’s Manual
Options
L350/L350D
You can add a number of options to make your computer even more
powerful and convenient to use. The following options are available:
Memory expansionTwo memory expansion slots are available for
installing 512 MB, 1024 MB or 2048 MB memory
modules. The modules are PC2-5300, 200-pin,
SO-DIMM (small-outline dual in-line memory
module). Maximum system memory capacity and
speed depend on the model you purchased.
PC2-5300 memory module works as PC2-4200
speed on GL960 Express chipset.
Battery PackAn additional battery pack 6 cell Type (PA3536U-
1BRS/ PA3536U-1BAS) and 9 cells Type
(PA3537U-1BRS/ PA3537U-1BAS) can be
purchased from your TOSHIBA dealer. The
battery pack is identical to the one that came with
your computer. Use it as a spare or replacement.
AC adaptorIf you use your computer at more than one site, it
may be convenient to purchase an additional AC
adaptor for each site so you will not have to carry
the adaptor with you.
USB FDDThe USB floppy disk drive accommodates either
Security lockA slot is available to attach a security cable to the
User’s Manual1-13
a 1.44 MB or 720 KB floppy disk through
connection to one of the computer’s USB ports.
In use, please be aware that, while you cannot
format 720 KB floppy disks under Windows
Vista™, you are able to read and write to disks
that have already been formatted.
computer to deter theft.
L350/L350D
1-14User’s Manual
The Grand Tour
This chapter identifies the various components of your computer.
Become familiar with each component before you operate the computer.
Front with the display closed
The following figure shows the computer’s front with its display panel in the
closed position.
L350/L350D
Chapter 2
Front edge logo
Wireless communication switch
Multiple digital media card slot*
*Depending on the model you purchased
Figure 2-1 Front of the computer with display closed
Front edge logoFront edge logo indicates the computer series you
bought.
Wireless
communication
switch
Set the switch to the off position in airplanes and hospitals. Check the
Wireless communication indicator. It stops glowing when the wireless
communication is terminated.
Slide this switch toward the right of the computer to
turn on Wireless communication. Slide it toward the
left of the computer to turn off the functions.
DISPLAY LATCH
Volume control
Headphone jack
Microphone jack
User’s Manual2-1
L350/L350D
Multiple digital
media card slot
(optional)
This slot allows you to easily transfer data from
devices, such as digital camera and PDA, that use
flash memory (SD/SDHC/MS/MS Pro/MMC
memory cards)(Provided with some models).
Display latchThis latch secures the LCD panel in its closed
position. Slide the latch to open the display.
Microphone jackA standard 3.5 mm mini microphone jack enables
connection of a monaural microphone or other
device for audio input.
Headphone jackA standard 3.5 mm mini headphone jack enables
connection of a stereo headphone (16 ohm
minimum) or other device for audio output. When
you connect headphones, the internal speaker is
automatically disabled.
Volume controlUse this dial to adjust the volume of the system
speaker and headphones.
2-2User’s Manual
Left side
The following figure shows the computer’s left side.
LAN jack
Fan vent
L350/L350D
Express Card slot
External monitor port
*Depending on the model you purchased
Figure 2-2 The left side of the computer
External monitor
port
This 15-pin port allows you to connect an external
monitor.
USB ports
HDMI out port*
Fan ventProvides air flow for the fan.
Be careful not to block the fan vent. Also be careful to keep foreign objects
out of the vents. A pin or similar object can damage the computer’s
circuitry.
HDMI out port
(optional)
HDMI out port can connect with Type A connector
HDMI cable. One HDMI cable can send and receive
video, audio and control signals.(Provided with
some models)
LAN jackThis jack allows you to connect to a LAN. The
adaptor has built-in support for Ethernet LAN
(10 Mbit/s, 10BASE-T) or Fast Ethernet LAN
(100 Mbit/s, 100BASE-TX). The LAN has two
indicators. See Chapter 4, Operating Basics, for
details.
User’s Manual2-3
L350/L350D
Universal serial
bus (USB 2.0)
ports
The two universal serial bus (USB) ports comply
with USB Serial 2.0 standards, which enables data
transfer speeds 40 times faster than the USB 1.1
standards. (The ports also support USB 1.1)
Keep foreign objects out of the USB connectors. A pin or similar object can
damage the computer’s circuitry.
Operation of all functions of all USB devices has not been confirmed. some
functions might not execute properly .
ExpressCard slotThe computer provides an Express Card slot on its
left side, which allows you to install an additional
Express card.(Provided with some models)
Keep foreign objects out of the Express Card slot. A pin or similar object
can damage the computer’s circuitry.
2-4User’s Manual
Right side
L350/L350D
The following figure shows the computer’s right side.
Security lock slot
Universal serial
bus (USB 2.0) port
Optical disc driveUSB port
Figure 2-3 The right side of the computer
The universal serial bus (USB) port comply with
USB Serial 2.0 standards, which enables data
DC IN 19V
transfer speeds 40 times faster than the USB 1.1
standards. (The port also support USB 1.1)
Keep foreign objects out of the USB connectors. A pin or similar object can
damage the computer’s circuitry.
Operation of all functions of all USB devices has not been confirmed. some
functions might not execute properly.
Optical disc driveSome models are equiped with a DVD Super Multi
drive or a HD DVD-ROM drive.
DC IN 19VThe AC adaptor connects to this socket. Use only
the model of AC adaptor that comes with the
computer. Using the wrong adaptor can damage
your computer.
Security lock slotA security cable attaches to this slot. The optional
security cable anchors your computer to a desk or
other large object to deter theft.
User’s Manual2-5
L350/L350D
Back side
The following figure shows the computer’s back side.
Modem jack*
*Depending on the model you purchased
Figure 2-4 The computer’s back side
Modem jack
(optional)
In areas where an internal modem is installed as
standard equipment, there is a modem jack that
allows you to use a modular cable to connect the
modem directly to a telephone line. The modem is
not supported in some marketing regions. (Provided
with some models)
2-6User’s Manual
Underside
The following figure shows the underside of the computer. Make sure the
display is closed before turning over your computer.
Battery pack lock
L350/L350D
Battery pack
Battery release Latch
Memory module cover
Figure 2-5 The underside of the computer
Battery packThe battery pack powers the computer when the AC
adaptor is not connected. The Batteries section in
Chapter 6, Power and Power-up Modes, describes
how to access the battery pack. Additional battery
packs can be purchased from your TOSHIBA dealer
to extend the computer’s battery operating time.
Battery release
latch
Slide this latch to release the battery pack.
This latch moves only when the computer is upside
down.
Battery pack lockSlide the battery pack lock to unl o cke d po si ti o n to
free the battery latch.
Memory module
cover
User’s Manual2-7
This cover protects two memory module sockets.
One or two modules are preinstalled.
L350/L350D
Front with the display open
The following figure shows the front of the computer with the display open.
To open the display, lift the display up and position the display at a
comfortable viewing angle.
Built-in microphone*
Function buttons*
Power button
Stereo speaker (left)
Web camera led*
Web camera*
Display screen
Stereo speaker (right)
Touch pad
Touch pad
System indicators
*Provided with some models
Figure 2-6 The front with the display open
control buttons
Display screenThe full-color LCD displays high-contrast text and
graphics. The computer’s LCD is 17" WXGA+,
1440 horizontal pixels x 900 vertical pixels.
The computer has a Thin-Film Transistor (TFT)
display. Refer to Appendix B.
When the computer operates on power through the
AC adaptor, the display screen’s image will be
somewhat brighter than when it operates on battery
power. The lower brightness level is intended to
save battery power.
Stereo speakerThe speaker emits sound generated by your
software as well as audio alarms, such as low
battery condition, generated by the system.
2-8User’s Manual
L350/L350D
Touch padMoves the pointer and selects or activates items on
the screen. Can be set to perform other mouse
functions, such as scrolling, selecting, and doubleclicking.
Touch pad control
buttons
Function like the left and right buttons on an
external mouse.
System indicatorsFive LEDs allow you to monitor the DC IN, power
status, main battery, disk and multiple digital media
card. Details are in the system indicators section.
Function buttonsSix buttons allow you to manage au dio /vi d eo , ru n
applications and access utilities. Details are in the
Function button section.(Provided with some
models)
Power button
Press the power button to turn the computer’s
power on and off. The power button LED indicates
the status.
Web cameraRecord/Send still or video images with this
integrated web camera. (Provided with some
models)
Web camera LEDThe web camera indicator glows blue when the web
camera software is used. (Provided with some
models)
Built-in
microphone
Record monaural sounds into your applications.
(Provided with some models)
Please handle your computer carefully to avoid scratching or damaging the
surface.
User’s Manual2-9
L350/L350D
Function Buttons
Six buttons are provided with some models.
Available for use: Mute, CD/DVD/HD DVD, Play/Pause, Stop, Previous,
Next.
These buttons allow you to manage audio/video, run applications and
access utilities. Refer to the Function Buttons section in Chapter 4,
Operating Basics, for details.
Mute buttonPress this button to turn off the sound.
CD/DVD/HD DVD
button
Play/Pause
button
Stop buttonPress this button to stop play.
Previous buttonPress this button to advance to the previous
Next buttonPress this button to advance to the ne xt track,
Press this button to launch an application
program that allows Windows Media Player /
DVD PLAYER / HD DVD PLAYER.(HD DVD
playback function is provided wi th som e mode ls.)
Press this button to begin playing an audio CD, a
DVD movie or digital audio files. This button also
acts as a Pause button.
track, chapter or data.
chapter or data.
2-10User’s Manual
System indicators
The following figure the system indicators, which light when various
computer operations are in progress.
DC INThe DC IN indicator glows green when DC power
L350/L350D
Multiple digital
media card
hdd/odd
DC IN
Power
Figure 2-7 System indicators
Main battery
is supplied from the AC power adaptor. If the
adaptor’s output voltage is abnormal or if the
power supply malfunctions, this indicator shows
no light.
PowerThe Power indicator glows green when the
computer is on. If you turn off the computer in
Sleep mode, this indicator blinks orange. If the
computer shuts down, this indicator shows no
light.
Main batteryThe Main battery indicator shows the condition
of the charge. Green means fully charged and
orange means being charged. Refer to
Chapter 6, Power and Power-up Modes.
HDD/ODD
The HDD/ODD indicator glows green when the
computer is accessing a Hard Disk Drive or an
Optical Disc Drive.
Multiple digital
media card
The Multiple digital media card indicator glows
green when the computer is accessing the
multiple digital media card.
User’s Manual2-11
L350/L350D
Keyboard indicators
The following figure shows the position of the CAPS LOCK indicator.
When the CAPS LOCK indicator glows the keyboard is in all-caps mode.
CAPS LOCKThis indicator glows green when letter keys are
Optical disc drives
A DVD Super Multi (± R DL) drive or HD DVD-ROM drive is configured in
your computer. When the computer is accessing a CD/DVD/HD DVD, an
indicator on the drive glows.
CAPS LOCK indicator
Figure 2-8 CAPS LOCK indicator
locked into their uppercase format.
About the HD DVD
This section describes the features, use of HD DVD and HD DVD Media.
Summary
HD DVD allows users to enjoy video, concerts and other packaged content
by taking advantage of its large amount of storage space and high-quality
audio and video. HD DVD also allows for the storage of long video when
combined with the latest video compression technologies.
The storage capacity and data transfer rate of HD DVD is superior to
standard DVD, with two types of playback-only discs in single-sided singlelayer 15GB and single-sided dual-layer 30GB (Gigabyte) formats.
■ Unfinalized DVDs created on home DVD recorders may not be
playable on the computer.
■ When inserting an unfinalized DVD-R DL disc into the computer,
Windows Vista™ may automatically finalize the disc and prevent
further writing.
2-12User’s Manual
L350/L350D
Notes on use
■ Because HD DVD is a new format there is a possibility of new features
being added at a later date. As such, it is important that the purchaser
understands that software and other updates may be necessary after
purchase. Please be sure to complete user registration in order to
receive timely product updates.
■ This product can play existing DVD and CD formats, however, playback
may not be possible with some software. This product cannot play
Blu-ray DISC™
■ HD DVD is a new standard which makes use of new technologies. As
such, there is a possibility of problems occurring related to connection,
compatibility or operation with some discs and other digital devices. The
HD DVD-ROM logo signifies that this drive complies with the HD DVD
physical standard, and does not signify compliance with the HD DVD
Video standard. This device does not support advanced features of the
HD DVD Video standard as defined by the DVD Forum, including
picture-in-picture and network dowload features. Screen movement
may not be smooth, and performance may be lowered with some
HD DVD content.
■ Playback of high bit rate content may cause frame dropping, audio
skipping or decrease in computer performance.
■ Viewing of HD DVD content on an external display requires a HDCP
capable HDMI™ or DVI input on the external display.
■ Make sure to connect the computer’s AC adaptor when playing a
HD DVD.
■ CPU power is concentrated on HD DVD playback when playing a
HD DVD, so make sure to exit all other applications.
■ Dolby Digital audio enhancements are only supported by Microsoft®
Windows® operating system. Content with high sample rates of 48kHz
or more are downsampled when output through either the built-in
speakers or headphone jack.
■ This device supports AACS (Advanced Access Content System) next
generation copy protection technology. Renewal of the AACS key
integrated into this device is required for uninterrupted enjoyment of
HD DVD. An Internet connection is required when renewing the key.
■ For more information on AACS keys, visit the AACS website
(www.aacsla.com/home
format software.
).
User’s Manual2-13
L350/L350D
Region codes for DVD drives and media
Optical disc drive and media are manufactured according to the
specifications of six marketing regions. When you purchase DVD-Video,
make sure it matches your drive, otherwise it will not play properly.
CodeRegion
1Canada, United States
2Japan, Europe, South Africa, Middle East
3Southeast Asia, East Asia
4Australia, New Zealand, Pacific Islands, Central America,
South America, Caribbean
5Russia, Indian Subcontinent, Africa, North Korea,
Mongolia
6China
Writable discs
This section describes the types of writable CD/DVD discs. Check the
specifications for your drive to for the type of discs it can write. Use
TOSHIBA Disc Creator to write compact discs. Refer to Chapter 4,
Operating Basics.
CDs
■ CD-R discs can be written only once. The recorded data cannot be
erased or changed.
■ CD-RW discs can be recorded more than once. Use either 1, 2, or
4 multi speed CD-RW discs or high-speed 4 to 10 speed discs.
The write speed of the ultra-speed CD-RW discs (Ultra-speed is
CD-RW/DVD-ROM drive only) is maximum 24 speed.
DVDs
■ DVD-R, DVD+R, DVD-R DL and DVD+R DL discs can be written only
once. The recorded data cannot be erased or changed.
■ DVD-RW, DVD+RW and DVD-RAM discs can be recorded more than
once.
DVD Super Multi (± R DL) drive
The full-size DVD Super Multi drive module allows you to record data to
rewritable CDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs
without using an adaptor.
2-14User’s Manual
The read speed is slower at the center of a disc and faster at the outer
edge.
The full-size HD DVD-ROM drive module allows you to record data to
rewritable CDs as well as run either 12 cm (4.72") HD DVD,12 cm (4.72") or
8 cm (3.15") CD/DVDs without using an adaptor.
The read speed is slower at the center of a disc and faster at the outer
edge.
The AC adaptor converts AC power to DC power and reduces the voltage
supplied to the computer. It can automatically adjust to any voltage from
100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to
use the computer in almost any region.
To recharge the battery, simply connect the AC adaptor to a power source
and the computer. See Chapter 6 Power and Power-up Modes for details.
Figure 2-9 The AC adaptor (2-pin plug)
Figure 2-10 The AC adaptor (3-pin plug)
■ Use of the wrong adaptor could damage your computer. TOSHIBA
assumes no liability for any damage in such case. The output rating for
the computer is 19 volts DC.
■ Please use only the AC adaptor supplied with the computer or an AC
adaptor certified by TOSHIBA.
2-16User’s Manual
Getting Started
This chapter provides basic information to start using your computer.
It covers the following topics:
Be sure also to read Instruction Manual for Safety and Comfort. This guide,
which is included with the computer, explains product liability.
■ Connecting the AC adaptor
■ Opening the display
■ Turning on the power
■ Starting up for the first time
■ Turning off the power
■ Restarting the computer
■ System Recovery Options
■ Restoring the pre-installed Software
If you are a new user, follow the steps in each section of this chapter as you
prepare to operate your computer
L350/L350D
Chapter 3
All users should be sure to carefully read the sections Windows Vista™
setup, which describe actions to take when you turn on the power for the
first time.
User’s Manual3-1
L350/L350D
Connecting the AC adaptor
Attach the AC adaptor when you need to charge the battery or you want to
operate from AC power. It is also the fastest way to get started, because
the battery pack will need to be charged before you can operate from
battery power.
The AC adaptor can be connected to any power source supplying from
100 to 240 volts and 50 or 60 hertz. For details on using the AC adaptor to
charge the battery pack, refer to Chapter 6, Power and Power-up Modes.
Use of the wrong adaptor could damage your computer. TOSHIBA
assumes no liability for any damage in such case. The output rating for the
computer is 19 volts DC.
1. Connect the power cord to the AC adaptor.
Figure 3-1 Connecting the power cord to the AC adaptor
2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack on the
right side of the computer.
DC IN JACK
Figure 3-2 Connecting the adaptor to the computer
3. Plug the power cord into a live wall outlet - the Battery and DC IN
indicators on the front of the computer should glow.
3-2User’s Manual
Opening the display
The display panel can be rotated in a wide range of angles for optimal
viewing.
To open the display, slide the latch to the right side and lift the panel up to
the best viewing angle.
When you open the display, be sure to hold the base firmly and lift up the
monitor slowly.
Turning on the power
L350/L350D
Figure 3-3 Opening the display panel
This section describes how to turn on the power
After you turn on the power for the first time, do not turn it off until you have
set up the operating system (OS) and the OS has started up
1. If the external diskette drive is connected, make sure it is empty. If a
diskette is in the drive, press the eject button and remove the diskette.
2. Open the display panel.
3. Press and hold the computer’s power button for two or three seconds.
Figure 3-4 Turning on the power
User’s Manual3-3
.
Power button
L350/L350D
Starting up for the first time
When you first turn on the power, the computer’s initial screen is the
Microsoft
Follow the on-screen directions.
®
Windows Vista™ Startup Screen Logo.
Turning off the power
The power can be turned off in one of three modes: shut down (Boot),
hibernation mode or sleep mode.
Shut down mode (Boot mode)
When you turn off the power in shut down mode, no data is saved and the
computer will boot to the operating system’s main screen.
1. If you have entered data, save it to the hard disk or to a diskette.
2. Make sure all disk(disc) activities are terminated, then remove any
CD/DVD/HD DVDs or diskette.
Make sure the disk’s indicator is off. If you turn off the power while a
disk(disc) is being accessed, you can lose data or damage the disk(disc).
3. Click Windows Start button, point to , and then select Shut Down.
4. Turn off the power to any peripheral devices.
Do not turn the computer or devices back on immediately. W ait a moment
to let all capacitors fully discharge.
Hibernation mode
The hibernation feature saves the contents of memory to the hard disk
when the computer is turned off. The next time the computer is turned on,
the previous state is restored. The hibernation feature does not save the
status of peripheral devices.
■ While entering hibernation mode, the computer saves the contents of
memory to the HDD. Data will be lost if you remove the battery or
disconnect the AC adaptor before the save is completed. Wait for the
Disk indicator to go out.
■ Do not install or remove a memory module while the computer is in
hibernation mode. Data will be lost.
3-4User’s Manual
L350/L350D
Benefits of
The hibernation feature provides the following benefits:
■ Saves data to the hard disk when the computer automatically shuts
down because of a low battery.
For the computer to shut down in hibernation mode, the hibernation feature
must be enabled in the Hibernate tab in Power Options. Otherwise, the
computer will shut down in sleep mode. If battery power becomes
depleted, data saved in sleep mode will be lost.
■ Y ou can return to your previous working environment immediately when
you turn on the computer.
■ Saves power by shutting down the system when the computer receives
no input or hardware access for the duration set by the system
hibernation feature.
■ You can use the panel power off feature.
hibernation
mode
Starting hibernation mode
To enter hibernation mode, follow the steps below.
1. Click Windows Start button.
2. Point to .
3. Select Hibernate.
Automatic hibernation mode
The computer will enter hibernation mode automatically when you press
the power button or close the lid. First, however, make the appropriate
settings according to the steps below.
1. Open the Control Panel.
2. Open Mobile PC and open Power Options.
3. Select Choose what the power button does .
4. Enable the desired hibernation settings for When I press the power button and When I close the lid.
5. Click the Save changes button.
You can also enable hibernation mode by pressing FN + F4 - please refer
to Chapter 5, The Keyboard, for further details.
Data save in hibernation mode
When you turn off the power in hibernation mode, the computer takes a
moment to save current memory data to the hard disk. During this time, the
Disk indicator will light.
After you turn off the computer and memory is saved to the hard disk, turn
off the power to any peripheral devices.
Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.
User’s Manual3-5
L350/L350D
Sleep mode
In sleep mode the power remains on, but the CPU and all other devices are
in sleep mode.
■ Before entering sleep mode, be sure to save your data.
■ Do not install or remove a memory module while the computer is in
sleep mode. The computer or the module could be damaged.
■ Do not remove the battery pack while the computer is in sleep mode
(unless the computer is connected to an AC power source). Data in
memory will be lost.
Benefits of sleep mode
The sleep feature provides the following benefits:
■ Restores the previous working environment more rapidly than does
hibernation feature.
■ Saves power by shutting down the system when the computer receives
no input or hardware access for the duration set by the system sleep
feature.
■ You can use the panel power off feature.
Executing sleep mode
You can also enable sleep mode by pressing FN + F3. See Chapter 5, The
Keyboard
, for details.
You can enter sleep mode in one of three ways:
1. Click Windows Start button, point to , and then click Sleep.
2. Close the display panel. This feature must be enabled. Refer to the
Power Options in the Control Panel.
3. Press the power button. This feature must be enabled. Refer to the
Power Option in the Control Panel.
When you turn the power back on, you can continue where you left when
you shut down the computer.
■ When the computer is shut down in sleep mode, the power indicator
glows orange.
■ If you are operating the computer on battery power, you can lengthen
the operating time by shutting down in hibernation mode. Sleep mode
consumes more power.
Sleep mode limitations
Sleep mode will not function under the following conditions:
■ Power is turned back on immediately after shutting down.
■ Memory circuits are exposed to static electricity or electrical noise.
3-6User’s Manual
Restarting the computer
Certain conditions require that you reset the computer, for example, if:
■ You change certain computer settings.
■ An error occurs and the computer does not respond to your keyboard
commands.
If you need to restart the computer, there are three ways this can be
achieved:
1. Click Start then click the arrow button () in the power
management buttons () and select Restart from the
menu.
2. Press CTRL, ALT and DEL simultaneously (once) to display the
menu window, then click the arrow button in the lower right corner of
the screen, then select Restart.
3. Press the power button and hold it down for five seconds. Once the
computer has turned itself off, wait between ten and fifteen seconds
before turning the power on again by pressing the power button.
System Recovery Options
About 1.5GB hidden partition is allocated on the hard disk drive for the
System Recovery Options.
This partition stores files which can be used to repair the system in the
event of a problem.
L350/L350D
The System Recovery Options feature will be unusable if this partition is
deleted.
System Recovery Options
The System Recovery Options feature is installed on the hard disk when
shipped from the factory. The System Recovery Options menu includes
tools to repair startup problems, run diagnostics or restore the system.
See the Windows Help and Support content for more information about
Startup Repair.
The System Recovery Options can also be run manually to repair
problems.
The procedure is as follows. Follow the instructi ons shown on the onscreen menu.
1. Turn off the computer.
2. Turn on the computer and when the TOSHIBA screen appears
repeatedly press the F8 key.
3. The Advanced Boot Options menu will be displayed.
Use the arrow keys to select Repair Your Computer and press ENTER.
User’s Manual3-7
L350/L350D
4. Follow the on-screen instructions.
The Windows Vista® CompletePC Backup feature can be used on
Windows Vista
®
Business Edition and Ultimate Edition.
Restoring the pre-installed Software
Depending on the model you purchased, different ways for restoring the
pre-installed software are offered:
■ Creating optical Recovery Discs
■ Restoring the pre-installed software from your created Recovery Discs.
■ Restoring the pre-installed software from the Recovery hard disk drive
■ Restoring the pre-installed software from the bundled Product Recovery
DVD-ROM (optional).
Creating Optical Recovery Discs
This section describes how to create Recovery Discs.
■ Be sure to connect the AC adaptor when you create Recovery Discs.
■ Be sure to close all other software programs except the Recovery Disc
Creator.
■ Do not run software such as screen savers which can put a heavy load
on the CPU.
■ Operate the computer at full power.
■ Do not use power-saving features.
■ Do not write to the disc when the virus check software is running. Wait
for it to finish, then disable virus detection programs including any
software that checks files automatically in the background.
■ Do not use utilities, including those intended to enhance hard disk drive
access speed. They may cause unstable operation and damage data.
■ Do not shut down/log off or Sleep/Hibernate while writing or rewriting
the disc.
■ Set the computer on a level surface and avoid places subjected to
vibrations such as airplanes, trains or cars.
■ Do not place your computer on unstab l e tables or any other unstable
surfaces.
A recovery image of the software on your computer is stored on the hard
disk drive, and can be copied to DVD media by using the following steps:
1. Have blank DVD media ready.
2. The application will allow you to choose from a variety of different media
onto which the recovery image can be copied including DVD-R,
DVD-RW, DVD+R, DVD+RW.
3-8User’s Manual
Please note that some of the above media may not be compatible with the
optical disc drive installed into your computer. You should therefore verify
the optical disc drive supports the blank media you have chosen before
proceeding.
3. Turn on your computer and allow it to load the Windows Vista®
operating system from the hard disk drive as normal.
4. Insert the first blank media into the optical disc drive tray .
5. Double click the Recovery Disc Creator icon on the Windows Vista®
desktop, or select the application from Start Menu.
6. Af ter Recovery Disc Creator starts, select the type of media and the title
you wish to copy, and then click the Create button.
7. Follow the on-screen instructions.
Your Recovery Discs will be created.
Restoring the pre-installed software from your created
Recovery Discs
If the pre-installed files are damaged, you are able to use the Recovery
Discs you have created to restore the computer to the state it was in when
you originally received it. To perfor m this restoration, follow the steps
below:
When the sound mute feature has been activated by pressing the
FN + ESC key, be sure to disable this to allow sounds to be heard before
starting the restore process. Please refer to Chapter 5, The Keyboard, for
further details.
L350/L350D
When you reinstall the Windows operating system, the hard disk will be
reformatted and all data will be lost.
1. Load the Recovery Discs into the optical disc drive and turn off the
computer’s power.
2. While holding down F12 key on the keyboard, turn on your computer when the TOSHIBA logo screen appears, release the F12 key.
3. Use the cursors key to select the CD-ROM icon from the menu. Please
refer to the Boot Priority section in Chapter 7, HW Setup and
Passwords, for further information.
4. A menu will be displayed from which you should follow the on-screen
instructions.
User’s Manual3-9
L350/L350D
Restoring the pre-installed software from the Recovery
hard disk drive
On your Data drive you may find a folder “HDDRecovery”. This folder
stores files which can be used to recover your system to the originally
installed factory state.
If you subsequently set up your hard disk drive again, do not change,
delete or add partitions in a manner other than specified in the manual,
otherwise you may find that space for the required software is not available.
In addition, if you use a third-party partitioning program to reconfigure the
partitions on your hard disk drive, you may find that it becomes impossible
to setup your computer.
When the sound mute feature has been activated by pressing the
FN + ESC key, be sure to disable this to allow sounds to be heard before
starting the restore process. Please refer to Chapter 5, The Keyboard, for
further details.
Be sure to connect the AC adaptor, otherwise you may run out of battery
during the recovery process.
When you reinstall the Windows operating system, the hard disk will be
reformatted and all data will be lost.
1. Turn off the computer.
2. Turn on the computer and when the TOSHIBA screen appears
repeatedly press the F8 key.
3. The Advanced Boot Options menu will be displayed.
Use the arrow keys to select Repair Your Computer and press ENTER.
4. Select your preferred keyboard layout and press Next.
5. To access the recovery process please log on as an enabled user with
sufficent rights.
6. Click TOSHIBA HDD Recovery on the System Recovery Options
screen.
7. Follow the on-screen instructions on the TOSHIBA HDD Recovery
dialog.
The computer will be restored to its factory state.
3-10User’s Manual
L350/L350D
Restoring the pre-installed software from the bundled Product
Recovery DVD-ROM (optional)
If the pre-installed files are damaged, use the Product Recovery DVD-ROM
to restore them.
To restore the operating system and all preinstalled software, follow the
steps below.
When the sound mute feature has been activated by pressing the
FN + ESC key, be sure to disable this to allow sounds to be heard before
starting the restore process. Please refer to Chapter 5, The Keyboard, for
further details.
When you reinstall the Windows operating system, the hard disk will be
reformatted and all data will be lost.
1. Load the Product Recovery DVD into the optical disc drive and turn off
the computer’s power.
2. While holding down F12 key on the keyboard, turn on your computer.
When the TOSHIBA logo screen appears, release the F12 key.
3. Use the cursor keys to select the CD-ROM icon from the menu. Please
refer to the Boot Priority section in Chapter 7, HW Setup & BIOS Setup
for further information.
4. A menu will be displayed from which you should follow the on-screen
instructions.
5. If your computer came with additional software installed, this software
can not be recovered from the Product Recovery DVD-ROM. Re-install
these applications (e.g. Works Suite, Games, etc.) separately from
other media.
User’s Manual3-11
L350/L350D
3-12User’s Manual
Operating Basics
This chapter gives information on basic operations including using the
touchpad, optical disc drives, Audio/Video controls, the web camera, the
microphone, the internal modem, wireless communication and LAN. It also
provides tips on caring for your computer, and CD/DVD/HD DVDs.
Using the touchpad
To use the touchpad, simply touch and move your finger tip across it in the
direction you want the on-screen pointer to go.
Two buttons below the touchpad are used like the buttons on a mouse
pointer.
Press the left button to select a menu item or to manipulate text or graphics
designated by the pointer. Press the right button to display a menu or other
function depending on the software you are using.
L350/L350D
Chapter 4
You can also tap the touchpad to perform functions similar to those of the
left button on a standard mouse.
Click: T ap the touchpad once.
Double-click: Tap twice
Drag and drop: Tap to select the material you want to move. Leave
your finger on the touchpad after the second tap and move the
material.
Touchpad
Touchpad control buttons
Figure 4-1 Touchpad and touchpad control buttons
User’s Manual4-1
L350/L350D
Using optical disc drives
Operation is the same for all optical disc drives. The full-size drive provides
high-performance execution of CD/DVD/HD DVDs-based programs. You
can run CD/DVD/HD DVDs without an adaptor. When the computer is
accessing a CD/DVD/HD DVDs, an indicator on the drive glows.
■ Use the TOSHIBA DVD PLAYER application to view DVD-Video
discs.(DVD Super Multi (± R DL) drive model)
■ Use the TOSHIBA HD DVD PLAYER application to view DVD-Video
discs or HD DVD-Video discs.(HD DVD-ROM model)
If you have a DVD Super Multi (± R DL) drive, refer also to theWriting CD/
DVDs on DVD Super Multi (± R DL) drive/HD DVD-ROM drive section for
precautions on writing to CD/DVDs.
Loading discs
To load CD/DVD/HD DVDs, follow the steps below and refer to figures.
1. a. When the power is on, press the eject button to open the drawer
slightly.
Eject button
Figure 4-2 Pressing the eject button
4-2User’s Manual
L350/L350D
b. Pressing the eject button will not open the drawer when the drive’s
power is off. If the power is off, you can open the drawer by
inserting a slender object (about 15 mm) such as a straightened
paper clip into the eject hole just to the right of the eject button.
15 mm
Eject hole
Diameter 1.0 mm
Figure 4-3 Manual release with the eject hole
2. Grasp the drawer gently and pull until it is fully opened.
Figure 4-4 Pulling the drawer open
User’s Manual4-3
L350/L350D
3. Lay the CD/DVD/HD DVD, label side up, in the drawer.
Figure 4-5 Inserting a CD/DVD/HD DVD
When the drawer is fully opened, the edge of the computer will extend
slightly over the CD/DVD/HD DVD tray. Therefore, you will need to turn the
CD/DVD/HD DVD at an angle when you place it in the tray. After seating
the CD/DVD/HD DVD, however, make sure it lies flat, as shown in above
figure.
■ Do not touch the laser lens. Doing so could cause misalignment.
■ Do not keep foreign matter from entering the drive. Check the back
edge of the tray to make sure it carries no debris before closing the
drive.
4. Press gently at the center of the CD/DVD/HD DVD until you feel it
click into place. The CD/DVD/HD DVD should lie below the top of the
spindle, flush with the spindle base.
4-4User’s Manual
5. Push the center of the drawer to close it. Press gently until it locks into
place.
If the CD/DVD/HD DVD is not seated properly when the drawer is closed,
the CD/DVD/HD DVD might be damaged. Also, the drawer might not open
fully when you press the eject button.
Figure 4-6 Closing the drawer
Removing discs
To remove the CD/DVD/HD DVD, follow the steps below and refer to below
figure.
L350/L350D
Do not press the eject button while the computer is accessing the drive.
Wait for the optical disc drive indicator to go out before you open the
drawer. Also, if the CD/DVD/HD DVD is spinning when you open the
drawer, wait for it to stop before you remove it.
1. To pop the drawer partially open, press the eject button. Gently pull
the drawer out until it is fully opened.
■ When the drawer pops open slightly, wait a moment to make sure the
CD/DVD/HD DVD has stopped spinning before pulling the drawer fully
open.
■ Turn off the power before you use the eject ho l e. If t he CD/D V D /HD
DVD is spinning when you open the drawer, the CD/DVD/HD DVD
could fly off the spindle and cause injury.
User’s Manual4-5
L350/L350D
Function Buttons
2. The CD/DVD/HD DVD extends slightly over the sides of the drawer so
you can grasp it. Hold the CD/DVD/HD DVD gently and lift it out.
Figure 4-7 Removing a CD/DVD/HD DVD
3. Push the center of the drawer to close it. Press gently until it locks into
place.
This section describes the button functions.
Six buttons are provided with some models.
Figure 4-8 Function Buttons
IconFunction
DVD/HD DVD*CD/None
Button
MuteMuteMute
CD/DVD/
HD DVD
Launch DVD PLAYER or
HD DVD PLAYER
Launch Windows Media
Player
Play/PausePlay/PausePlay/Pause
StopStopStop
PreviousPrevious chapterPrevious tune
NextNext chapterNext tune
4-6User’s Manual
Using TOSHIBA HD DVD PLAYER to enjoy HD DVDs
(preinstalled with some models)
HD DVD playback restrictions
HD DVD-ROM drive model allow users to enjoy the strong visuals of
HD DVD Video.
TOSHIBA HD DVD PLAYER software is provided for playback of HD DVD
Video.
Notes on use
HD DVD playback
■ HD DVD is a new standard which makes use of new technologies. As
such, there is a possibility of problems occurring related to connection,
compatibility or operation with some discs and other digital devices. The
HD DVD-ROM logo sign fies that this drive complies with the HD DVD
physical standard, and does not signify compliance with the HD DVD
Video standard. This device might not support advanced features of the
HD DVD Video standard as defined by the DVD Forum, including
picture-in-picture and network download features. Screen movement
may not be smooth, and performance may be lowered with some
HD DVD content.
■ This device supports AACS (Advanced Access Content System)
nextgeneration copy pr tection technology. Renewal of the AACS key
integrated into this device is required for uninterrupted enjoyment of
HD DVD. An Internet connection is required when renewing the key.
■ Because HD DVD playback operates according to programs built-into
the content, operation methods, operation screens, sound effects, icons
and other features may vary from disc to disc. For more information on
these items refer to instructions included with content or contact the
content manufacturers directly.
L350/L350D
Notes on playing HD DVD video discs
HD DVD video discs
■ Please use TOSHIBA HD DVD PLAYER for HD DVD playback.
Windows Media Player and other commercially available software
cannot be used for HD DVD playback.
■ HD DVD playback may take several moments to begin.
User’s Manual4-7
L350/L350D
When using
■ Frame dropping, audio skipping or out of synch audio and video may
occur during playback of some HD DVD Video titles.
■ Close all other applications when using the TOSHIBA HD DVD
PLAYER. Do not open any other applications or carry out any other
operations during HD DVD playback. Playback may stop or not function
properly in some situations.
■ Do not playback HD DVD discs Video while watching or recording
television programs using other applications. Doing so may cause
HD DVD playback or television program recording errors. In addition, if
pre-scheduled recording starts during HD DVD playback it may cause
HD DVD playback or television program recording errors. Please view
HD DVD Video during times when there is no recording pre-scheduled.
■ The resume function cannot be used with some discs on the TOSHIBA
HD DVD PLAYER.
■ Make sure to connect the computer’s AC adaptor when using the
TOSHIBA HD DVD PLAYER. Power-saving features may interfere with
smooth playback.
■ Set the Power option profile to High Performance when using the
TOSHIBA HD DVD PLAYER.
■ Screen savers will not display while playing a movie in the TOSHIBA
HD DVD PLAYER. The computer will also not go into sleep mode,
hibernation mode or shut down while using TOSHIBA HD DVD
PLAYER.
■ Do not configure the Display automatic power off function to run while
the TOSHIBA HD DVD PLAYER is running.
■ The Windows Aero function is disabled while the TOSHIBA HD DVD
PLAYER is running.
Display devices & audio
■ TOSHIBA HD DVD PLAYER will only run when Colors is set to
Highest (32 bit). The Colors setting can be adjusted on the Monitor
tab in the Display Settings. To open the Display Settings,
click Start -> Control Panel -> Appearance and Personalization ->
Personalization -> Display Settings.
■ If the HD DVD Video image is not displayed on an external display or
television, stop the TOSHIBA HD DVD PLAYER, and change the
screen resolution in Resolution on the Monitor tab in the Display Settings. However, video cannot be output to some external displays
and televisions due to output or playback conditions.
■ A HDCP compatible HDMI input is required on external displays or
televisions to view video being played in the TOSHIBA HD DVD
PLAYER on an external display or television.
4-8User’s Manual
L350/L350D
■ When viewing on an external display or television, use a HDMI cable to
connect the external device to the HDMI out port and change the
display device before playing. The display device cannot be changed
during playback.
■ HD DVD Video can only be displayed on the computer’s display panel
or televisions connected to the computer’s HDMI out port. HD DVD
Video cannot be displayed on televisions connected to the S-Video
output connector or external displays connected to the RGB connector.
In addition, HD DVD Video cannot be displayed simultaneously (in
clone or Dualview modes) on the computer’s display panel and an
external display or television.
■ Do not change the screen resolution while running the TOSHIBA
HD DVD PLAYER.
■ Audio data of more than 48 kHz/16 bit will be down sampled to
48 kHz/16 bit.
TOSHIBA HD DVD PLAYER
■ TOSHIBA HD DVD PLAYER software is supported for playback of
HD DVD Video, DVD-Video and DVD-VR.
■ The TOSHIBA HD DVD PLAYER does not have a parental control
function.
■ In order to protect copyrights, the Windows Print Screen function is
disabled when TOSHIBA HD DVD PLA YER is running. Print Screen
functions are disabled even when running other applications besides
TOSHIBA HD DVD PLAYER and when TOSHIBA HD DVD PLAYER is
minimized. Please close the TOSHIBA HD DVD PLAYER to use the
Print Screen function.
■ Carry out the installation/uninstallation of the TOSHIBA HD DVD
PLAYER under a user account with administrator rights.
■ Do not change Windows Users while TOSHIBA HD DVD PLAYER is
running.
■ Some HD DVD Video disc titles may return to the title before the
playback time (playback position) displayed in the control window
reaches the end time.
■ For some HD DVD Video discs, using the control window to change the
audio track will also change the subtitle track.
■ Periodic updates will be necessary to continue using the TOSHIBA
HD DVD PLAYER.
User’s Manual4-9
L350/L350D
Using TOSHIBA HD DVD PLAYER
Starting TOSHIBA HD DVD PLAYER
1. Use the following procedure to start TOSHIBA HD DVD PLAYER.
Insert a HD DVD-Video in the HD DVD drive while Windows Vista™ is
running. When a HD DVD-Video disc and a HD DVD (Twin format
disc) are set in the HD DVD drive, the following application selection
screen may appear. If this occurs, select Play HD DVD movie or Run
the HD DVD Launcher, then click OK to launch the TOSHIBA HD
DVD PLAYER.
Figure 4-9 Application selection screen
2. Select Start -> All Programs -> TOSHIBA HD DVD PLAYER to start
TOSHIBA HD DVD PLAYER.
The TOSHIBA HD DVD PLAYER can also be started from the Media
Center top menu.
Operating TOSHIBA HD DVD PLAYER
Notes on Using TOSHIBA HD DVD PLAYER.
■ The HD DVD standard defines A, B, C and D buttons, and some
software may display [Press the A button] or similar messages.
If a message of this type appears, use the following corresponding
keyboard keys.
A button: keyboard A key
B button: keyboard B key
C button: keyboard C key
D button: keyboard D key
■ Screen display and available features may vary amongst HD DVD-
Videos and scenes.
4-10User’s Manual
L350/L350D
■ Only operation buttons (including remote controller and Front operation
panels) which correspond to currently available and active features will
be useable during HD DVD playback.
■ If the menu is opened in the Display Area using the Control window’s
T op Menu or Menu buttons, touchpad and mouse menu operations may
not be able to be used.
Display area
Maximize
Settings
Help
Exit
Minimize
TOSHIBA HD DVD PLAYER control window
Figure 4-10 TOSHIBA HD DVD PLAYER windows
Display AreaDisplays video. Double click on the Display Area
to toggle full screen display mode on and off.
Click the Display Area to display the Control
window when it isn’t displayed.
MaximizeMaximizes the window of TOSHIBA HD DVD
PLAYER.
User’s Manual4-11
L350/L350D
SettingsDisplays the Settings screen.
HelpOpens help.
MinimizeMinimizes the window of TOSHIBA HD DVD
PLAYER.
ExitCloses TOSHIBA HD DVD PLAYER.
TOSHIBA HD DVD
PLAYER control
window
The buttons on the panel are used to control
playback of HD DVD-Video discs. Click the
Display Area to display the Control window when
it is hidden. Please refer to the following
“TOSHIBA HD DVD PLAYER control win dow”
section for more information.
Open TOSHIBA HD DVD PLAYER HELP
TOSHIBA HD DVD PLA YER features and instructions are also explained in
detail in TOSHIBA HD DVD PLAYER Help.
Click the Help button() in the Display Area to open TOSHIBA HD DVD
PLAYER Help.
TOSHIBA HD DVD PLAYER control window
The following are the main buttons used when playing HD DVD-Video.
Please refer to Help for details on each button.
Buttons may not be able to be used on some titles, even if the button is
displayed.
Counter
Always on top
Exit
Current position
Figure 4-11 TOSHIBA HD DVD PLAYER control window (1)
Volume control
Mute
Multi audio channel
output
CounterDisplays play time, title number and chapter
number during disc playback.
Always on topSets the control window as always on top, so that
it is not hidden by other windows or full screen
display.
4-12User’s Manual
L350/L350D
ExitCloses TOSHIBA HD DVD PLAYER.
Current positionDisplays the current position with in the title on
the bar icon.
Volume controlAdjusts the volume to the level selected by
dragging the slider bar.
MuteMutes the sound when clicked. Clicking when the
sound is muted returns the volume to the
previous level.
Multi audio channel
output
Switches between available multi audio channel,
during playback of a DVD-VR. This function can
be used during playback of a DVD-VR only.
Eject
Previous chapter
Next chapter
Stop
Fast rewind
Play
Figure 4-12 TOSHIBA HD DVD PLAYER control window (2)
One-touch replay
Pause
Fast forward
One-touch skip
Slow motion
EjectOpens the disc tray.
Previous chapterJumps to the previous chapter.
Next chapterJumps to the next chapter.
StopStop s a HD DVD currently being run.
Fast rewindFast rewinds a HD DVD currently being run.
PlayPlays a HD DVD.
Fast forwardFast forwards a HD DVD currently being run.
PauseTemporally stops a HD DV D cu rre ntly being run.
One-touch replayRewinds by a specified amount of time and
continues playback from that position.
User’s Manual4-13
L350/L350D
One-touch skipJumps forward by a specified amount of time and
continues playback from that position.
Slow motionPerforms slow motion playback.
Twin format disc (DVD selected)Twin format disc (HD DVD selected)
Sound
Subtitle
Angle
Drive specification
Repeat
Figure 4-13 TOSHIBA HD DVD PLAYER control window (3)
Title/Chapter search
Top Menu
Return
Menu
SubtitleSwitches between available subtitles.
SoundSwitches between audio tracks for titles which
have more than 1 audio track.
AngleSwitches between angles for multi-angle
compatible titles.
RepeatSwitches between repeat chapter, repeat title
and normal playback modes.
Title/Chapter searchSearches for chapters or titles.
Drive specificationSpecifies which drive to use when an external
HD DVD drive is connected.
TWIN format disc
(HD DVD selected)*1
Reads the HD DVD layer of the HD DVD (Twin
format disc). Click DVD button to switch to the
DVD layer.
TWIN format disc
(DVD selected)*1
Reads the DVD layer of the HD DVD (Twin
format disc). Click HD DVD button to switch to
the HD DVD layer.
Top menuDisplays the HD DVD Top Menu.
MenuDisplays the HD DVD Menu.
ReturnDisplays the HD DVD title selection screen.
*1: Displayed when a HD DVD (Twin format disc) is placed in the optical
disc drive.
4-14User’s Manual
Using the computer in place of a HD DVD Player
Videos played using TOSHIBA HD DVD PLAYER included with the
computer can be displayed on a television equipped with a HDMI input
port.
HD DVD-Video can only be displayed on the computer’s display panel or
on a television connected to the HDMI out port. HD DVD-Video cannot be
displayed on televisions connected to the S-Video out port or external
displays connected to the RGB connector.
Before connecting
Please refer to the television’s user manual as well as this chapter when
connecting the computer to a television.
■ Televisions Which Can Be Connected to the Computer Televisions
which are equipped with a HDMI input port can be connected to the
computer.
Please use a commercially available HDMI cable to connect the
television and computer.
Not all televisions equipped with a HDMI input port have been tested for
compatibility with this product. As such, Toshiba cannot guarantee that
HD DVD-Video content can be displayed on all televisions equipped
with a HDMI input port. HD DVD Video content may not display properly
on some televisions.
L350/L350D
Connecting to the computer
Turn off the television and computer before connecting.
1. Insert the HDMI cable plug into the HD MI ou t po rt o n th e co mp uter.
HDMI out port
HDMI cable
Figure 4-14 Connecting the HDMI out port
2. Insert the remaining HDMI cable plug into the HDMI input port on the
television.
3. Turn on the television first, and then the computer.
Audio will be output from both the television and the computer. The
volume dial or FN + ESC keys can be used to mute the computer
audio. The volume level for both the television and computer can be
adjusted using the WAVE item in Volume Control.
User’s Manual4-15
L350/L350D
Switching between computer and television display
The following method can be used to display HD DVD-Video. The display
method can be changed by changing the display device setting.
Configure the following settings to display HD DVD-Video on the television.
If the following settings are not configured, HD DVD-Video will not be
displayed on the television.
Notes on operation
■ Change the display device setting before playing HD DVD-Video.
Do not change the display device while playing HD DVD-Video.
■ Do not change the display device at the following times:
■ When reading or writing data.
■ When carrying out communications operations.
■ HD DVD-Video cannot be played when using Clone or Dualview
(extended desktop) displays modes. Set either the computer’s display
panel or the television as the sole display device.
The display device setting can be changed using the FN + F5 keys. When
you press these hot keys, a dialog box appears. Only selectable devices
will be displayed. Hold down FN and press F5 again to change the device.
When you release FN and F5, the selected device will change. If you hold
down these hot keys for five seconds the selection will return to the
computer’s display panel.
Display compa tibility
Only the computer’s display panel supports display with high definition
processing. When displaying on a television connected to the computer the
display on the television will only be ordinary display and not display with
high definition processing. The following is a HD DVD-Video display
compatibility list.
O: The display of TOSHIBA HD DVD PLAYER is possible.
X: The display of TOSHIBA HD DVD PLAYER is impossible.
When using TOSHIBA HD DVD PLA Y ER
Computer’s display PanelO
Television *O
External display *O
Simultaneous displayX
* Can only display on devices equipped with a HDMI port.
4-16User’s Manual
L350/L350D
Writing CD/DVDs on DVD Super Multi (± R DL) drive/
HD DVD-ROM drive
Some models are equipped with a full-size DVD Super Multi (± R DL ) drive
or the HD DVD-ROM drive which can be used to write data to either
CD-R/RW or DVD-R/-RW/+R/+RW/-RAM/+R DL/-R DL discs. The following
applications for writing are supplied: TOSHIBA Disc Creator or Ulead DVD
Movie Factory
Important message (DVD Super Multi (± R DL) drive/HD DVD-ROM drive)
Before you write or rewrite to CD-R/RW or
DVD-R/-RW/+R/+RW/-RAM/+R DL/-R DL disc, read and follow all setup
and operating instructions in this section.
If you fail to do so, the DVD Super Multi (± R DL) drive or the
HD DVD-ROM drive may not function properly, and you may fail to write or
rewrite, lose data or incur other damage.
Before writing or rewriting
■ Based on TOSHIBA’s limited compatibility testing, we suggest the
following manufacturers of CD-R/RW and
DVD-R/+R/-RW/+RW/-RAM/+R DL/-R DL disc.
However, in no event does TOSHIBA guarantee the operation, quality or
performance of any disc. Disc quality can affect write or rewrite success
rates
.
CD-R:
TAIYO YUDEN CO., LTD.
MITSUBISHI KAGAKU MEDIA CO., L TD
Ricoh Co., Ltd.
®
for TOSHIBA, which is a product of Ulead Systems, Inc.
CD-RW: (High-Speed, Multi-Speed)
MITSUBISHI KAGAKU MEDIA CO., L TD
CD-RW: (Ultra-Speed)
MITSUBISHI KAGAKU MEDIA CO., L TD
DVD-R:
DVD Specifications for DVD-R Disc for General Version 2.0
Matsushita Electric Industrial Co., Ltd.
TAIYO YUDEN CO., LTD.
Hitachi Maxell Ltd.
DVD+R:
MITSUBISHI KAGAKU MEDIA CO., L TD
Ricoh Co., Ltd.
User’s Manual4-17
L350/L350D
DVD-RW:
DVD Specifications for DVD-RW Disc for General Version 1.2
MITSUBISHI KAGAKU MEDIA CO., LTD
Victor Company of Japan, LTD
DVD+RW:
MITSUBISHI KAGAKU MEDIA CO., LTD
DVD-RAM:
DVD Specifications for DVD-RAM Disc for Version 2.0, Version 2.1 or
Version 2.2
Matsushita Electric Industrial Co., Ltd.
Hitachi Maxell Ltd.
DVD+R DL:
MITSUBISHI KAGAKU MEDIA CO., LTD.
DVD-R DL:
MITSUBISHI KAGAKU MEDIA CO., LTD.
DVD-R for Labelflash™:
FUJIFILM Corporation.
DVD+R for Labelflash™:
FUJIFILM Corporation.
■ This DVD Super Multi (± R DL) drive cannot use discs that allow writing
faster than 8x speed (DVD-R, DVD+R and DVD+RW media), 6x speed
(DVD-RW media), 5x speed (DVD-RAM media) and 4x speed (DVD-R
DL and DVD+R DL media).
■ This HD DVD-ROM drive cannot use discs that allow writing faster than
■ If the disc is poor in quality, dirty or damaged, writing or rewriting errors
may occur. Be careful to check the disc for dirt or damage before you
use it.
■ The actual number of rewrites to CD-RW, DVD-RW, DVD+RW or
DVD-RAM is affected by the quality of the disc and the way it is used.
■ There are two types of DVD-R discs: authoring and general use discs.
Do not use authoring discs. Only general use discs can be written to by
a computer drive.
■ We can support only format 1 of DVD-R DL. Therefore you can not do
the additional writing. If your data is under DVD-R(SL) capacity, we
suggest to use DVD-R(SL) media.
4-18User’s Manual
L350/L350D
■ Y ou can use DVD-RAM discs that can be removed from a cartridge and
DVD-RAM discs designed without a cartridge. You cannot use a disc
with a 2.6 GB single-sided capacity or 5.2 GB double-sided capacity.
■ Other DVD-ROM drives for computers or other DVD PLAYERS may not
be able to read DVD-R/-R DL/-RW or DVD+R/+R DL/+RW discs.
■ Data written to a CD-R/DVD-R/DVD+R disc cannot be deleted either in
whole or in part.
■ Data deleted (erased) from a CD-RW and DVD-RW, DVD+RW and
DVD-RAM disc cannot be recovered. Check the content of the disc
carefully before you delete it. If multiple drives that can write data to
discs are connected, be careful not to delete data from the wrong drive.
■ In writing to a DVD-R/-R DL/-RW, DVD+R/+R DL/+RW or DVD-RAM
disc, some disc space is required for file management, so you may not
be able to write the full capacity of the disc.
■ Since the disc is based on the DVD standard, it will be filled with dummy
data if the written data is less than about 1 GB. Even if you write only a
small amount of data, it might take time to fill in the dummy data.
■ DVD-RAM formatted by FAT32 cannot be read in Windows 2000
without DVD-RAM Driver Software.
■ When multiple drives that can write data to discs are connected, be
careful not to write to the wrong drive.
■ Be sure to connect the universal AC adaptor before you write or rewrite.
■ Before you enter sleep/hibernation mode, be sure to finish DVD-RAM
writing. Writing is finished if you can eject DVD-RAM media.
■ Be sure to close all other software programs except the writing
software.
■ Do not run software such as a screen saver, which can put a heavy load
on the CPU.
■ Operate the computer in the full-power mode. Do not use power-saving
features.
■ Do not write while virus check software is running. Wait for it to finish,
and then disable virus detection programs including any software that
checks files automatically in the background.
■ Do not use hard disk utilities, including those intended to enhance HDD
access speed. They may cause unstable operation and data damage.
■ Write from the computer’s HDD to the CD/DVD. Do not try to write from
shared devices such as a LAN server or any other network device.
■ Writing with software other than TOSHIBA Disc Creator is not
recommended.
User’s Manual4-19
L350/L350D
When writing or rewriting
Please observe/consider the following when you write or rewrite to a
CD-R/RW, DVD-R/-R DL/-RW/-RAM or DVD+R/+R DL/+RW disc.
■ Do not perform any of the following actions:
■ Change users in the Windows Vista™ operating system.
■ Operate the computer for any other function, including use of a
mouse or touchpad, closing/opening the LCD panel.
■ Start a communication application such as a modem.
■ Apply impact or vibration to the PC.
■ Install, remove or connect external devices, including items such as
SD/SDHC memory card, ExpressCard, Memory Stick/Memory Stick
Pro, card, MultiMediaCard, USB device, external monitor, or an
optical digital device.
■ Use the Audio/Video control button to reproduce music or voice.
■ Open the optical disc drive.
■ Do not use shut down/log off and sleep/hibernation while writing or
rewriting.
■ Make sure writing or rewriting is completed before going into sleep/
hibernation. Writing is completed if you can open the DVD Super Multi
(± R DL) drive tray.
■ Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains, or cars. Do not use an unstable
surface such as a stand.
■ Keep mobile phones and other wireless communication devices away
from the computer.
■ Always copy data from the HDD to the optical disc. Do not use
cut-and-paste. The original data will be lost if there is a write error.
Disclaimer (DVD Super Multi (± R DL) drive/HD DVD-ROM drive)
■ TOSHIBA does not bear responsibility for the following:
■ Damage to any CD-R/RW or
DVD-R/-R DL/-RW/+R/+R DL/+RW/DVD-RAM disc that may be caused
by writing or rewriting with this product.
■ Any change or loss of the recorded contents of CD-R/RW or
DVD-R/-R DL/-RW/+R/+R DL/+RW/DVD-RAM disc that may be caused
by writing or rewriting with this product, or for any business profit loss or
business interruption that may be caused by the change or loss of the
recorded contents.
■ Damage that may be caused by using third party equipment or
software. Given the technological limitations of current optical disc
writing drives, you may experience unexpected writing or rewriting
errors due to disc quality or problems with hardware devices. Also, it is
a good idea to make two or more copies of important data, in case of
undesired change or loss of the recorded contents.
4-20User’s Manual
TOSHIBA Disc Creator
Note the following limitations when you use TOSHIBA Disc Creator:
■ DVD-Video cannot be created using TOSHIBA Disc Creator.
■ DVD-Audio cannot be created using TOSHIBA Disc Creator.
■ You cannot use TOSHIBA Disc Creator’s “Audio CD for Car or Home
CD Player” function to record music to DVD-R, DVD-R DL,DVD-RW,
DVD+R, DVD+R DL, DVD+RW, HD DVD-R or HD DVD-RW media.
■ Do not use the “Disc Backup” function of TOSHIBA Disc Creator in
order to copy DVD Video, DVD-ROM, HD DVD-R or HD DVD-RW
material that has copyright protection.
■ DVD-RAM discs cannot be backed up using the “Disc Backup”
functionof TOSHIBA Disc Creator.
■ You cannot back up CD-ROM, CD-R or CD-RW media to DVD-R,
DVD-R DL, DVD-RW, HD DVD-R or HD DVD-RW media using the
“Disc Backup” function of TOSHIBA Disc Creator.
■ You cannot back up CD-ROM, CD-R or CD-RW media to DVD+R,
DVD+R DL or DVD+RW media using the “Disc Backup” function of
TOSHIBA Disc Creator.
■ You cannot back up DVD-ROM, DVD Video, DVD-R, DVD-R DL,
DVD-RW, DVD+R, DVD+R DL, DVD+RW, HD DVD-R or HD DVD-RW
to CD-R or CD-RW media using the “Disc Backup” function of
TOSHIBA Disc Creator.
■ TOSHIBA Disc Creator cannot record in packet format.
■ You might not be able to use the “Disc Backup” function of TOSHIBA
Disc Creator to back up a DVD-R, DVD-R DL, DVD-RW, DVD+R,
DVD+R DL, DVD+RW, HD DVD-R or HD DVD-RW disc that was made
with other software on a different optical media recorder.
■ If you add data to a DVD-R, DVD-R DL, DVD+R, DVD+R DL,
HD DVD-R or HD DVD-RW disc that you have already recorded to,you
might not be able to read the added data under some circumstances.
For example, it cannot be read under 16-bit operating systems, such as
Windows 98SE and Windows Me, while in Windows NT4 you will need
Service Pack 6 or later, and in Windows 2000, you will need Service
Pack 2. In addition to this, some DVD-ROM and DVD-ROM / CD-R/RW
drives cannot read this added data regardless of the operating system.
■ TOSHIBA Disc Creator does not support recording to DVD-RAM discs -
to achieve this you should use Windows Explorer or another similar
utility.
■ When you back up a DVD disc, be sure that the source drive supports
recording to DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL or
DVD+RW media - if this is not the case then the source disc might not
be backed up correctly.
■ When you back up a DVD-R, DVD-R DL, DVD-RW, DVD+R,DVD+R
DL, DVD+RW or HD DVD-R disc, be sure to use the same type of disc.
■ You cannot partially delete any data written to a CD-RW, DVD-RW,
DVD+RW disc.
L350/L350D
User’s Manual4-21
L350/L350D
Data verification
To verify that data has been written or rewritten correctly to a data CD/DVD
you should follow the steps below before you begin the write/rewrite
process:
1. Display the setting dialog box by one of the following two steps:
■ Click the setting button ( ) for writing on the main toolbar in the
Data CD/DVD mode.
■ Select Setting for writing -> Data CD/DVD in the Setting menu.
2. Mark the Verify written data check box.
3. Select File Open or Full Compare mode.
4. Click the OK button.
How to learn more about TOSHIBA Disc Creator
Please refer to the Help files for additional TOSHIBA Disc Creator
information.
Video
You can record video using Ulead DVD MovieFactory® for TOSHIBA.
When Using Ulead DVD MovieFactory® for TOSHIBA
How to make a Labelflash DVD (optional)
Simplified steps for making a Labelflash DVD:
1. Insert a Labelflash disc in DVD drive.
Set PRINTING SIDE for underside.
2. Click Start -> All Programs -> DVD MovieFactory for TOSHIBA ->
Ulead DVD MovieFactory for TOSHIBA Laucherto lanuch DVD
5. Choose DVD Drive for Printer. e.g.<E:> PIONEER DVD....
6. Add and customize the look of your images and text.
7. Click Labelflash setting and choose Draw Quality.
8. Click Print.
4-22User’s Manual
L350/L350D
How to make a DVD-Video
Simplified steps for making a DVD-Video from video data captured from a
DV-Camcorder:
1. Click St art -> All Programs -> DVD MovieFactory for TOSHIBA -> Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD
MovieFactory.
2. Insert a DVD-RW or DVD+RW disc in Burner.
3. Click Video Disc -> Burn Video to Disc to launch Direct Recording
dialog box, choose DVD-Video/+VR to invoke Straight Capture to Disc Page.
4. Choose DVD-Video format.
5. Choose the capture source is DV.
6. Press Capture button.
Simplified steps for making a DVD-Video from adding video source:
1. Click St art -> All Programs -> DVD MovieFactory for TOSHIBA -> Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD
MovieFactory.
2. Click Video Disc -> New Project to invoke 2nd Launcher, choose your
project type, then invoke DVD MovieFactory.
3. Add source from HD Disk by click Add Video files button to invoke
browser dialog box.
4. Choose the source video then go to Next page to apply Menu.
5. After choose the menu template, press Next button to go to Burning Page.
6. Choose the output type then press Burn button.
How to learn more about Ulead DVD MovieFactory
Please refer to the Help and Manual files for additional Ulead DVD
MovieFactory information.
®
Important information for use
Note the following limitations when you write Video DVD:
1. Editing digital video
■ Log in with Administrator rights to use DVD MovieFactory.
■ Make sure that your computer is running on AC power when using
DVD MovieFactory.
■ Operate the computer at Full Power. Do not use power-saving
features.
■ While you are editing DVD, you can display preview. However, if
another application is running. The preview might not display
properly.
■ DVD MovieFactory cannot edit or play copy protected content.
■ Do not enter sleep or hibernation mode while using DVD
MovieFactory.
User’s Manual4-23
L350/L350D
■ Do not operate DVD MovieFactory immediately after turning on the
computer. Please wait until all Disc Drive activity has stopped.
■ When recording to a DV-Camcorder, to ensure you capture all of
your data, let the camcorder record for a few seconds before you
begin recording your actual dat a .
■ CD recorder, JPEG functions, DVD-Audio, mini DVD and Video CD
functions are not supported in this version.
■ While recording video to DVD, please close all other programs.
■ Do not run software like a screen saver because it can put a heavy
load on the CPU.
■ Do not support mp3 decode and encode.
2. Before recording the video to DVD
■ When you record DVD disc, please use only discs recommended by
the Drive manufacturer.
■ Do not set the working drive to a slow device like a USB1.1 hard
disk drive or it will fail to write DVD.
■ Do not perform any of the following actions:
■ Operate the computer for any other function, including using a
mouse or touchpad, or closing/opening the display panel.
■ Bump or cause vibration to the computer.
■ Use the Mode control button and Audio/Video control button to
reproduce music or voice.
■ Open the DVD drive.
■ Install, remove or connect external devices, including items such
as a SD/SDHC memory card, ExpressCard, Memory Stick/
Memory Stick Pro card, Mu ltiMediaCard, USB device, external
monitor, or an optical digital device.
■ Please verify your disc after recording important data.
■ DVD-R/+R/+RW disc cannot be written in VR format.
■ Not support to output VCD and SVCD format.
3. About Straight to Disc
■ Not support to record on DVD-R/+R disc
■ Not support to record DVD+VR format by HDV
■ HDV support to burn DVD-Video only
■ DVD-VR format not support to add Menu
4. About recorded DVDs
■ Some DVD-ROM drives for personal computers or other DVD
PLAYERS may not be able to read DVD-R/+R/-RW/-RAM discs.
■ When playing your recorded disc on your computer, please use
InterVideo WinDVD software application.
■ If you use an over-used rewritable disc, the full formatting might be
locked. Please use a brand new disc.
4-24User’s Manual
Media care
This section provides tips on protecting data stored on your
CD/DVD/HD DVD.
Handle your media with care. The following simple precautions will
increase the lifetime of your media and protect the data stored on them:
CD/DVD/HD DVD
L350/L350D
1. Store your CD/DVD/HD DVD in the container they came in to protect
them and keep them clean.
2. Do not bend the CD/DVD/HD DVD.
3. Do not write on, apply a sticker to, or otherwise mark the surface of
the CD/DVD/HD DVD that contains data.
4. Hold the CD/DVD/HD DVD by its outside edge or the edge on the
center hole. Fingerprints on the surface can prevent the drive from
properly reading data.
5. Do not expose to direct sunlight, extreme heat or cold. Do not place
heavy objects on your CD/DVD/HD DVD.
6. If your CD/DVD/HD DVDs become dusty or dirty, wipe them with a
clean dry cloth. Wipe from the center out, do not wipe in a circular
direction around the CD/DVD/HD DVD. If necessary, use a cloth
dampened in water or a neutral cleaner. Do not use benzine, thinner
or similar cleaner
Using the web camera
A Built-in web camera is provided with some models.
This section describes the bundled webcam utility, which can capture still
and video images. The web camera will auto-run when Windows starts.
Please unstick the protective plastic-film before using the Web Camera.
Web camera LED
Built-in microphone
Figure 4-15 Web camera
User’s Manual4-25
Web camera lens
L350/L350D
Using the software
The web camera software is pre-configured to start when you turn on
Windows Vista; if you need to restart it go to Start -> All Programs ->
Camera Assistant Software -> Camera Assistant Software.
Video recording
Audio recording
Capture still images
Effects
Mute
Figure 4-16 Using the Software
Function
Display window
Camera resolution
Capture Still ImageClick to see a preview of the captured image; you
can also e-mail the image.
Video RecordingClick to prepare for recording. Click again to start
recording. One more to stop recording and see
preview of the video.
Audio RecordingClick to start recording, Click again to stop and
About Displays software manufacturer details.
PlayerPlays video files.
EffectsChooses images to be displayed on the capture
screen.
PropertiesChooses from the Options tab to flip, zoom,
flicker rate, night mode and backlight
compensation; in the Image tab change the
colour settings; in the profile tab change the
lighting conditions.
4-26User’s Manual
SettingsChooses from the : Options tab to change the
tool position; the Picture tab to select picture
output options such as size, export file and
saving location; the Video tab to choose output
settings such as Frame Rate, Size, Compression
and the file save path; the Audio Device,
Compression,Volume and file save path.
HelpDisplays the help files for the software.
Using the microphone
Your computer has a built-in microphone that can be used to record
monaural sounds into your applications. It can also be used to issue voice
commands to applications that support such functions.(Built-in microphone
is provided with some models)
Since your computer has a built-in microphone and speaker, “feedback”
may be heard under certain conditions. Feedback occurs when sound from
the speaker is picked up in the microphone and amplified back to the
speaker, which amplifies it again to the microphone.
This feedback occurs repeatedly and causes a very loud, high-pitched
noise. It is a common phenomenon that occurs in any sound system when
the microphone input is output to the speaker (throughput) and the speaker
volume is too loud or too close to the microphone. You can control
throughput by adjusting the volume of your speaker or through the Mute
function in the Master Volume panel. Refer to your Windows documentation
for details on using the Master Volume panel.
L350/L350D
Modem
The availability of this feature is depending on the model you purchased.
This section describes how to connect and disconnect the internal modem
to and from a telephone jack.
The internal modem does not support voice functions. All data and fax
functions are supported.
■ In case of a lightning storm, unplug the modem cable from the
telephone jack
■ Do not connect the modem to a digital telephone line. A digital line will
damage the modem.
Region selection
Telecommunication regulations vary from one region to another, so you will
need to make sure the internal modem’s settings are correct for the region
in which it will be used.
User’s Manual4-27
L350/L350D
To select a region, follow the steps below.
1. In Windows Vista™, click start, point to All Programs, point to
TOSHIBA, point to Networking and click Modem Region Select.
Do not use the Country/Region Select function in the Modem setup utility
in the Control Panel if the function is available. If you change the Country/
Region in the Control Panel, the change may not take effect.
2. The Region Selection icon will appear in the Windows Task Bar.
Figure 4-17 The Region Selection icon (Windows Vista™)
3. Click the icon with the primary mouse button to display a list of
regions that the modem supports. A sub menu for telephony location
information will also be displayed. A check will appear next to the
currently selected region and telephony location.
4. Select a region from the region menu or a telephony location from the
submenu.
■ When you click a region it becomes the modem’s region selection,
and the New Location for telephony will be set automatically.
■ When you select a telephony location, the corresponding region is
automatically selected and it becomes the modem’s current region
setting.
Properties menu
Click the icon with the secondary mouse button to display the following
menu.
Figure 4-18 The menu list (Windows Vista™)
Setting
You can enable or disable the following settings:
AutoRun Mode
The Region Select utility starts automatically when you start up the
operating system.
Open the Dialing Properties dialog box after selecting region.
4-28User’s Manual
The dialing properties dialog box will be displayed automatically
after you select the region.
Location list for region selection.
A submenu appears displaying location information for telephony.
Open dialog box, if the modem and Telephony Current
Location region code do not match.
A warning dialog box is displayed if current settings for region code
and telephony location are incorrect.
Modem Selection
If the computer cannot recognize the internal modem, a dialog box is
displayed. Select the COM port for your modem to use.
Dialing Properties
Select this item to display the dialing properties.
If you are using the computer in Japan, the Telecommunications Business
Law requires that you select Japan region mode. It is illegal to use the
modem in Japan with any other selection.
Connecting
To connect the internal modem cable, follow the steps below.
1. Plug one end of the modular cable into the modem jack.
2. Plug the other end of the modular cable into a telephone jack.
L350/L350D
Modem jack
Telephone jack
Figure 4-19 Connecting the internal modem
Do not pull on the cable or move the computer while the cable is
connected.
User’s Manual4-29
L350/L350D
If you use a storage device such as a DVD-ROM drive, CD-RW/DVD-ROM
drive or HDD connected to a 16-bit PC card, you might experience the
following modem problems:
■ Modem speed is slow or communication is interrupted.
■ Skips may occur in sound.
Disconnecting
To disconnect the internal modem cable, follow the steps below.
1. Pinch the lever on the connector in the telephone jack and pull out the
connector.
2. Disconnect the cable from the computer in the same manner.
Wireless communications
The computer’s wireless communication function supports Wireless LAN.
Wireless LAN
The Wireless LAN is compatible with other LAN systems based on Direct
Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing
radio technology that complies with IEEE 802.11 wireless LAN standard
(Revision A, B, G or draft N).
Supported features. It supports the following features:
■ Automatic Transmit Rate Select mechanism in the transmit range of 54,
48, 36, 24, 18, 9 and 6 Mbit/s (Revision A and G).
■ Automatic Transmit Rate Select mechanism in the transmit range of 11,
5.5, 2 and 1 Mbit/s (Revision B).
■ Frequency Channel Selection (Revision A/draft N: 5 GHz, Revision
B/G/draft N: 2.4GHz)
■ Roaming over multiple channels
■ Card Power Management
■ Wired Equivalent Privacy (WEP) data encryption, based on the 128 bit
encryption algorithm (Atheros module type).
■ 11a, 11b, 11g and 11n wireless are based on IEEE 802.11a, 802.11b,
802.11g and 802.11n respectively. The IEEE 802.11n specification has
not been finalized and is currently in draft release. The TOSHIBA
11a/b/g/n Wireless LAN Adaptors are based on the draft release
version 2.0, of the IEEE 802.11n specification. An adaptor with 11a/b,
11a/b/g or 11a/b/g/n can communicate on any of its supported formats;
the actual connection will be based on the access point to which it
connects.
■ Connection compatibility with the wireless equipment in draft 11n mode
is not guaranteed.
■ The draft 11n function cannot be used with WEP/TKIP. Draft 11n mode
can be used only with WPA-PSK(AES) mode or no security mode.
4-30User’s Manual
Security
■ Be sure to enable encryption function. Otherwise your computer will
allow the illegal access by an outsider through wireless LAN to cause
illegal instruction, eavesdropping, and loss or destruction of stored data.
TOSHIBA strongly recommends the customer to enable the encryption
function.
■ TOSHIBA is not liable for the eavesdropping of data due to the use of
Wireless LAN and the damage thereof.
Wireless communication switch
Y ou can enable or disable RF transmission(Wireless LAN) functions on and
off, with this switch. No transmissions are sent or received when the switch
is off. Slide the switch toward the right of the computer to turn it on and
toward the left of the computer to turn it off.
Set the switch to off in airplanes and hospitals. Check the indicator. It will
stop glowing when the wireless communication function is off.
Turn the computer off when you enter an airplane and check the carrier’s
regulations before you use a computer on board.
Wireless communication Indicator
The wireless communication indicator indicates the status of the wireless
communication functions.
L350/L350D
Indicator statusIndication
Indicator off
Indicator glows
If you used the Task Bar to disable Wireless LAN, restart the computer or
follow the procedures below to enable the system to recognize Wireless
LAN. Click Start -> Control Panel -> System and Maintenance ->
System -> Device Manager -> Network Adaptors, and right click the
wireless device then choose Enable.
It may not be possible to make a network connection to a specified network
name using the ad hoc network function.
If this occurs, the new network(*) will have to be configured for all
computers connected to the same network in order to re-enable network
connections.
* Please be sure to use new network name.
User’s Manual4-31
Wireless communication switch is set to off.
Wireless communication switch is on.
Wireless LAN is turned on by an application.
L350/L350D
LAN
The computer has built-in support for Ethernet LAN (10 megabits per
second, 10BASE-T) or Fast Ethernet LAN (100 megabits per second,
100BASE-TX)(depending on model you purchased). This section describes
how to connect/disconnect to a LAN.
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
The Wake-up on LAN function consumes power even when the system is
off. Leave the AC adaptor connected while using this feature.
Connecting LAN cable
The computer must be configured properly before connecting to a LAN.
Logging onto a LAN using the computer’s default settings could cause a
malfunction in LAN operation. Check with your LAN administrator
regarding set-up procedures.
If you are using Fast Ethernet LAN (100 Mbit/s, 100BASE-TX), be sure to
connect with a category 5 cable, CAT5, or higher.
If you are using Ethernet LAN (10 Mbit/s, 10BASE-T), connect with a
category 3 cable, CAT3, or higher.
To connect the LAN cable, follow the steps below.
1. Turn off the power to the computer and to all external devices
2. Plug one end of the cable into the LAN jack. Press gently until you
connected to the computer.
hear the latch click into place.
LAN jack
Figure 4-20 Connecting the LAN cable
3. Plug the other end of the cable into a LAN hub connector. Check with
your LAN administrator before connecting to a hub.
When the computer is exchanging data with the LAN, the LAN active
indicator glows orange. When the computer is connected to a LAN hub but
is not exchanging data, the link indicator glows green.
4-32User’s Manual
Disconnecting LAN cable
To disconnect the LAN cable, follow the steps below.
Make sure the LAN active indicator (orange LED) is out before you
disconnect the computer from the LAN.
1. Pinch the lever on the connector in the computer’s LAN jack and pull
out the connector.
2. Disconnect the cable from the LAN hub in the same manner. Check
with your LAN administrator before disconnecting from the hub.
Cleaning the computer
To help ensure long, trouble-free operation, keep the computer free of dust
and use care with liquids around the computer.
■ Be careful not to spill liquids into the computer. If the computer does get
wet, turn the power off immediately and let the computer dry completely
before you turn it on again.
■ Clean the computer using a slightly damp (with water) cloth. You can
use glass cleaner on the display. Spray a small amount of cleaner on a
soft, clean cloth and wipe the screen gently with the cloth.
Never spray cleaner directly onto the computer or let liquid run into any
part of it. Never use harsh or caustic chemical products to clean the
computer.
L350/L350D
Moving the computer
The computer is designed for rugged durability. However, a few simple
precautions taken when moving the computer will help ensure trouble-free
operation.
■ Make sure all disk activities are terminated before moving the computer.
Check if the Disk indicator and external device indicator are off.
■ If a CD/DVD/HD DVD is in the drive, remove it. Also make sure the
drawer is securely closed.
■ Turn off the power to the computer.
■ Disconnect the AC adaptor and all peripherals before moving the
computer.
■ Close the display. Do not pick up the computer by its display panel.
■ Close all port covers.
■ Use the carrying case when transporting the computer.
■ When carrying your computer, be sure to hold it securely so that it does
not fall or hit anything.
■ Do not carry your computer by holding protruded portions.
User’s Manual4-33
L350/L350D
Heat dispersal
T o protect from overheating, the CPU has an internal temperature sensor. If
the computer’s internal temperature rises to a certain level, the cooling fan
is turned on or the processing speed is lowered. You can select whether to
control the CPU temperature by turning on the fan first, then if necessary,
lowering the CPU speed. Or, by lowering the CPU speed first, then if
necessary, turning on the fan. These functions are controlled within the
Power Options.
When the CPU temperature falls to a normal range, the fan is turned off
and the CPU operation returns to standard speed.
If the CPU temperature reaches an unacceptably high level with either
setting, the system automatically shuts down to prevent damage. Data in
memory will be lost.
4-34User’s Manual
The Keyboard
The number of keys on your keyboard depends on which country/region’s
keyboard layout your computer is configured with. Keyboards for numerous
languages are available.
There are four types of keys: typewriter keys, function keys, soft keys, and
Windows special keys.
Typewriter keys
The typewriter keys, produce the uppercase and lowercase letters,
numbers, punctuation marks, and special symbols that appear on the
screen.
There are some differences, however, between using a typewriter and
using a computer keyboard:
■ Letters and numbers produced in computer text vary in width. Spaces,
which are created by a “space character,” may also vary depending on
line justification and other factors.
■ The lowercase l (el) and the number 1 (one) are not interchangeable on
computers as they are on a typewriter.
■ The uppercase O (oh) and the 0 (zero) are not interchangeable.
■ The CAPS LOCK function key locks only the alphabetic characters in
uppercase while the shift lock on a typewriter places all keys in the
shifted position.
■ The SHIFT keys, theTABkey, and theBACK SPACE key perform the
same function as their typewriter counterparts but also have special
computer functions.
L350/L350D
Chapter 5
User’s Manual5-1
L350/L350D
Function keys: F1 … F9
The function keys, not to be confused with FN, are the 9 keys at the top of
your keyboard. These keys are dark gray, but function differently from the
other dark gray keys.
F1 through F9 are called function keys because they execute programmed
functions when pressed. Used in combination with the FN key, keys
marked with icons execute specific functions on the computer. See the
section, Soft keys: FN key combinations, in this chapter. The function
executed by individual keys depends on the software you are using.
Soft keys: FN key combinations
The FN (function) is unique to Toshiba computers and is used in
combination with other keys to form soft keys. Soft keys are key
combinations that enable, disable or configure specific features.
Some software may disable or interfere with soft-key operations. Soft key
settings are not restored by the Resume fe ature.
Hot keys
Hot keys (pressing FN + a function or ESC key) allow you to enable or
disable certain features of the computer.
Sound mute: Pressing FN + ESC in a Windows environment turns sound
on or off. When you press these hot keys, the current setting will be
displayed as an icon.
Lock: Pressing FN + F1 enters “Lock computer” mode. To re store your
desktop, you need to log on again.
Power plan: Pressing FN + F2 changes the power settings.
5-2User’s Manual
L350/L350D
Sleep: Pressing FN + F3 switches the system to sleep mode.
Hibernate: Pressing FN + F4 switches the system to hibernation mode.
Output: Pressing FN + F5 changes the active display device.
Brightness down: Pressing FN + F6 decreases the computer’s display
panel brightness in individual steps.
Brightness up: Pressing FN + F7 increases the computer’s display panel
brightness in individual steps.
Wireless: Pressing FN + F8 switches the active wireless devices if the
wireless communication switch is switched on.
If your wireless communication device is not installed, a dialog box will not
appear.
Touchpad: Pressing FN + F9 enables or disables the touchpad function.
User’s Manual5-3
L350/L350D
FN sticky key
Zoom: Pressing FN + SPACE changes the display resolution.
size on the desktop or the font sizes within one of the supported application
windows.
TOSHIBA zooming utility (enlarge): Pressing FN + 2 enlarges the icon
size on the desktop or the font sizes within one of the supported application
windows.
Y ou can use the Toshiba Accessibility Utility to make the FN key sticky, that
is, you can press it once, release it, and they press an “F number” key.
To start the Toshiba Accessibility Utility, click Start -> All Programs ->
TOSHIBA -> Utilities -> Accessibility.
Windows special keys
The keyboard provides two keys that have special functions in Windows:
one activates the Start menu and the other has the same function as the
secondary mouse button.
This key activates the Windows Start menu.
This key has the same function as the secondary mouse button.
5-4User’s Manual
Generating ASCII characters
Not all ASCII characters can be generated using normal keyboard
operation. But, you can generate these characters using their ASCII codes.
With the overlay on:
1. Hold down ALT.
2. Using the overlay keys, type the ASCII code.
3. Release ALT, and the ASCII character appears on the display screen.
With the overlay off:
1. Hold ALT + FN.
2. Using the overlay keys, type the ASCII code.
3. Release ALT + FN, and the ASCII character appears on the display
screen.
L350/L350D
User’s Manual5-5
L350/L350D
5-6User’s Manual
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.