ThinkPad 600X
ThinkPad 600X
This guide provides information for setting up your computer for the first time.
Setup Guide
Front view (with external diskette drive)
Brightness control
Suspend indicator
Battery indicator
Internal speakers
Hard-disk drive
Click buttons
UltraslimBay
Video-out
connector
LCD latch
Liquid crystal display (LCD)
System-status
indicators
Built-in microphone
TrackPoint
Volume control
PC Card eject buttons
PC Card slots
Infrared port
Headphone jack
Line-in jack
Microphone jack
External diskette
drive
Diskette eject
button
Setup Guide
P/N: 08K9398
Rear view
External-input-device
connector
External-monitor
connector
Parallel connector
System-expansion connector
Serial connector
Power jack
Universal serial bus (USB)
connector
Security keyhole
Modem connector
Power switch
Reset switch
Copyright IBM Corporation 1999. All rights reserved.
Setting up your computer
You are now ready to assemble and start your computer.
1
If you have a printer, open the connector cover. Connect
one end of the printer cable to the parallel connector and
the other end to your printer. Then power on the printer.
3
Connect the AC Adapter to the computer's power jack (at
the rear of the computer) in the order shown.
2
If you want to use the CD-ROM and the diskette drive at
the same time, you can attach the diskette drive to the
external-diskette-drive connector as follows:
Insert the diskette drive in the diskette-drive enclosure and
connect it firmly .1/. Connect the cable to the
external-diskette-drive connector .2/.
2
2
3
2
4
Open the liquid crystal display (LCD).
Pull the LCD latches .1/ and open the LCD .2/. Then
position the LCD so that it is convenient for viewing.
1
1
2
1
1
1
Loading...