IBM 2785+01 User Manual
Family 2785+01 IBM Infoprint 2085
United States
Home | Products & services | Support & downloads | My account
Family 2785+01 IBM Infoprint 2085
IBM Universal Sales Manual
Revised: October 19, 2004.
Table of contents
Document options
IBM U.S. Product Life Cycle Dates Technical Description
Abstract Publications
Highlights Features -- Specify/Special/Exchange
Description Accessories
Product Positioning Machine Elements
Models Supplies
Printable version
IBM U.S. Product Life Cycle Dates
Type Model Announced Available Marketing Withdrawn Service Discontinued Replaced By
2785-001 2002/04/30 2002/05/24 2004/11/12 - None
Back to top
Abstract
The IBM 2785 is the cut-sheet product line 2085 multifunction production device that is a full-function, high-speed printer and
duplication system. This and the 2705 are IBM's first products available that effectively combine a true datacenter-centric controller with
copier capabilities. The Infoprint 2085 (2785) and 2105 (2705) are cost-efficient, easy-to-use, print-on-demand solutions that can help
you gain a competitive edge and win in the marketplace.
Model Abstract 2785-001
(No Longer Available as of November 12, 2004)
The IBM 2785 Infoprint 2085 Model 001 allows speeds up to 85 impressions per minute. The Average Monthly Print Volume (AMPV)
for the Infoprint 2085 is 300,000 impressions.
Back to top
Highlights
The additional flexibility of the Infoprint 2085 and 2105 products allow you the ability to create professional-quality documents, even
with complex multistock composition, at speeds up to 85 and 105 impressions per minute.
This professional multifunction system includes:
● 600 dots-per-inch (dpi) print quality with print volumes of up to 800,000 impressions per month
● Three input drawers with a total capacity for 3,000 sheets and a 3,000 sheet finisher as standard
● Optional additional three drawer, 4,550-sheet paper feeder
● Finishing capabilities that include a stitcher, and 2-, 3-, or 4-hole punch
http://gsmserv.boulder.ibm.com/cd/usmhw/M2785$01.htm (1 of 47)5/25/2005 7:01:07 AM
Family 2785+01 IBM Infoprint 2085
● IPDS standard on the printers
● Support for a wide selection of paper weights and sizes
● The ability to process content-rich pages, including statements with logos, business graphics, and signatures using the features
of Advanced Function Printing (AFP)
Back to top
Description
The Infoprint 2085 and 2105 are high-end, cut-sheet, multifunction production devices with print speeds up to 85 and 105 impressionsper-minute (ipm), with good print quality at 600 dots-per-inch (dpi) with conversions for 240 and 300 dpi. With these high output speeds,
one can create a more productive environment and substantially reduce time waiting at the printer.
IPDS is standard on the Infoprint 2085 and 2105. Optional support for Adobe PostScript, PCL, and PDF is available. The Infoprint 2105
and 2085 provide Ethernet 10/100BaseT for TCP/IP and optional Token-Ring for TCP/IP attachment capability.
As network datacenter printers, the Infoprint 2085 and 2105 offer the following benefits:
● Large paper input capacity of 3,000 sheets in three trays standard
● Finisher with stitcher capability standard
● Optional high-capacity feeder
● Optional 2-, 3-, or 4-hole punch
● Autosensing of data streams
● Printer-resident Web pages
● E-mail notification and status with wireless support
● Custom paper sizes
● Support for a variety of host software including PSF, Infoprint Manager, and Infoprint Server
As copier multifunction printers, the Infoprint 2085 and 2105 offer the following benefits:
● 72 ipm integrated scanner at 600 dpi
● Ability to connect two printers for up to 210 ipm in copy mode
● Standard copying convenience functions
● Automatic reversing document feeder and glass platen
The Infoprint 2085 and 2105 can help transform your business to become more competitive and win in the marketplace. In addition to
printing at 85 ipm for Infoprint 2085 and 105 ipm for Infoprint 2105, the printers have a 72 ipm integrated scanner that supports digital
copying at 85 copies per minute for Infoprint 2085 and 105 for Infoprint 2105.
High-Performance Controller
Both Infoprint 2085 and 2105 have high-performance controllers with a 500 MHz PowerPC 750L processor with 1 MB of L2 cache and
an IBM printer co-processor. The controller has an onboard 10/100BaseTX Ethernet attachment and a Peripheral Component
Interconnect (PCI) Bus for an optional Token-Ring adapter.
Other benefits of the controllers include:
SDRAM Memory
Standard memory is 256 MB SDRAM. No memory options are available.
Hard Drive
http://gsmserv.boulder.ibm.com/cd/usmhw/M2785$01.htm (2 of 47)5/25/2005 7:01:07 AM
Family 2785+01 IBM Infoprint 2085
A 10 GB hard drive comes standard with both printers. IPDS Single Byte Character Set (SBCS) and Double Byte Character Set
(DBCS) fonts come stored on the hard drive. With the PCL/PostScript feature installed, SBCS fonts including SEMEA (Southern
Europe, Middle East, Africa) PCL fonts are available on the hard drive.
Downloaded fonts and macros may be individually deleted from the hard drive. PCL 6 fonts and PCL 6 macros can be downloaded and
stored using the IBM Departmental Printer Resource Utility (DPRU).
IBM AFP/IPDS
Infoprint 2085 and 2105 come standard with IBM's AFP/IPDS.
PCL/PostScript
Infoprint 2085 and 2105 support PCL and Adobe PostScript with the optional PCL/PostScript features. Included in these features are:
● PCL 5e resident fonts - 47 fonts
● PCL 6 resident fonts - 47 fonts
● Adobe PostScript 3 resident fonts - 136 fonts total
The PCL/PostScript feature (feature numbers 4820/4821) includes Single Byte Character Set (SBCS) support. It also comes with a CDROM that includes a setup wizard, PCL/PostScript drivers, port monitors, MIBs, and DPRU. The feature is tied to a specific machine is
are not interchangeable with other Infoprint 2085 and 2105 machines.
The PostScript Japanese feature (feature numbers 4810/4811) include Double Byte Character Set (DBCS) support with Morisawa fonts
(GothicBBB-Medium and Ryumin-Light). This feature should only be ordered if double byte support is required. The PCL/PostScript
feature (feature number 4820/4821) is a pre-requisite for this feature. The Japanese PCL/PostScript feature is tied to a specific
machine and is not interchangeable with other Infoprint 2085 and 2105 machines.
Token-Ring
Infoprint 2085 and 2105 support an optional Token-Ring 4/16 adapter in addition to the standard Ethernet attachment. However, only
one attachment, Ethernet or Token-Ring, can be active at a time.
Control Panel
Infoprint 2085 and 2105 have a full-color 9-inch LCD (D-STN), 640 x 480 dot control panel. It consists of an LCD touch-screen, hard
keys, and colored LEDs for status.
Two languages can be loaded into the control panel and the operator may select between the two. If Japanese language is loaded,
then only one language can be loaded.
Paper Handling
Infoprint 2085 and 2105 come with 3,000-sheet input capacity standard. This capability includes three input drawers. An optional 4,550sheet High Capacity Feeder with three drawers is available, which increases the maximum input capacity to 7,550 sheets. Duplex
capability comes standard with both printers.
Custom paper sizes are supported in trays 2 and 3. Custom size is 148 mm x 210 mm (SEF) minimum (5.9 in. x 8.3 in.) and 297 mm x
432 mm (SEF) maximum (11.8 in. x 17 in.). Custom paper sizes run at half speed and are supported in PostScript, IPDS, and PCL 6,
but not PCL 5.
Infoprint 2085 and 2105 print the front side of duplex pages first. This means preprinted forms that will be used for both simplex and
duplex jobs can be loaded in a single tray and used effectively with no extra steps required.
A finisher with stitching capabilities comes standard with both printers. It has a proof bin with 500-sheet capacity (A4/Letter) and a shift
bin with 3,000-sheet capacity (A4/Letter). Single page jobs cannot be shifted (offset) and jobs cannot be stapled and shifted. If a job
http://gsmserv.boulder.ibm.com/cd/usmhw/M2785$01.htm (3 of 47)5/25/2005 7:01:07 AM
Family 2785+01 IBM Infoprint 2085
requires both of these, it will be stapled only.
Optional hole-punching kits are available. See Paper Handling Options section for a description of the punch kits. Only one punch kit
may be installed at a time and it requires a CE to install or change the kits. Punch jobs can go to the shift tray or proof tray.
Paper Handling Options
● 4,550-Sheet High Capacity Feeder (feature numbers 4520/4521)
This feature has three trays for 4,550-sheet capacity. Trays 4 and 5 have 1,000-sheet capacity each and tray 6 has 2,550-sheet
capacity.
● A3/11" x 17" Tray Kit (feature numbers 4500/4501)
This option supports large size media including A3/11 x 17 in. media. It replaces the standard tray 1 (tandem tray) which cannot
be used again without a CE involvement. This tray is supported in tray 1 only and has a capacity of 1,000 sheets. Media
supported in this tray include A3 SEF, B4 SEF, A4 SEF, A4 LEF, 11" x 17" SEF, Letter SEF, Letter LEF, and Legal SEF.
● 2-Hole Punch Kit for Finisher (feature numbers 4620/4621)
This option supports 2-hole punching in the European and Japan format.
● 2-Hole Punch Kit for Finisher (feature numbers 4622/4623)
This option supports 2-hole punching in the U.S. format.
● 3-Hole Punch Kit for Finisher (feature numbers 4624/4625)
This option supports 3-hole punching.
● 4-Hole Punch Kit for Finisher (feature numbers 4626/4627)
This option supports 4-hole punching.
● 4-Hole Swedish Style Punch Kit for Finisher (feature numbers 4628/4629)
This option supports Swedish style 4-hole punching.
Print Quality
Infoprint 2085 and 2105 offer high-quality print resolution of 600 x 600 dpi. Both printers support up to 256 levels of gray for IOCA
images.
There are three print modes; Refine, Normal, and Econo. Refine mode is the default and offers the best overall print quality. Normal
mode is slightly darker than Refine mode and Econo mode is slightly lighter with reduced toner usage.
For AFP/IPDS, resolutions of 240, 600, or AUTO, the print mode must be set to enhanced print mode. Enhanced print mode produces
the optimal print quality; however, complex jobs may print slower. Standard print mode is available for optimal performance of complex
print jobs.
Print Area
Both printers support a printable area of within 4 mm of the edge on all sides for IPDS and PCL/PostScript data streams. Edge-to-edge
mode allows printing to within 2 mm leading edge and 0 mm on all other edges of the media.
Maximum Monthly Usage
The maximum monthly usage for both Infoprint 2085 and 2105 is 800,000 impressions. IBM does not recommend printing to this
monthly maximum on a consistent basis.
Average Monthly Usage
http://gsmserv.boulder.ibm.com/cd/usmhw/M2785$01.htm (4 of 47)5/25/2005 7:01:07 AM
Family 2785+01 IBM Infoprint 2085
The Average Monthly Print Volume (AMPV) for Infoprint 2085 is 300,000 impressions and for Infoprint 2105 is 400,000 impressions.
Copying Capability
Infoprint 2085 and 2105 printers include a digital copier as standard. The copier is extremely powerful but still easy to use. All copier
functions are accessed through the large, user friendly, dual language touch panel. Originals are scanned in and a digital
representation of the original is created that can be printed on these printers.
Simplex and duplex originals can be copied by either placing them on the scanner glass or utilizing the ARDF (Auto Reverse Document
Feeder). The ARDF is a fast and versatile scan feeder, capable of handling up to 100 sheets at a time (80 g/sm, 20 lb). The ADRF can
scan pages up to 72 ppm (8.5" x 11" or A4). The scanner can handle a wide variety of paper sizes from 5.5" x 8.5" (140 mm x 216 mm)
to 11" x 17" (279 mm x 432 mm).
The ARDF can scan mixed paper sizes and weights in the same stack. The ARDF is also capable of automatic paper size selection
and automatic paper reduction/enlargement on a sheet-by-sheet basis. It scans originals at 8 bits and 600 dpi.
The copier also includes an integrated document server and editor. The document server stores up to 250 jobs or up to 5,000 pages.
The document server allows the user to scan originals and save the documents onto the built-in hard drive, and print saved documents.
All of the available finishing options are available when printing a stored document. Documents can be protected with user IDs and
passwords. The document server also allows the user to print a sample copy, insuring that the full print job will be output correctly.
An optional Copy Connect Cable may be used to connect two printers together to load balance copy jobs between two printers. It does
not double the speed of the print job. The cable is 10 meters in length.
Overall, the Infoprint 2085 and 2105 copier functions are full-featured and easy to use. The combination of a high-speed digital
scanner, a top-notch printer, and exceptional function creates an extremely effective tool for any business.
Media Weights
Infoprint 2085 and 2105 support the following media weights:
● ARDF: 52-128 g/m2 (16-32lb Bond)
● Trays 1,2,3,6: 52-163 g/m2 (16lb Bond to 90lb Index), tabbed media not supported
● Trays 4,5: 52-216 g/m2 (16lb Bond to 110lb Index), including tabbed media
For more information, see the IBM Advanced Function Printer Cut-Sheet Paper Reference for use with IBM Electrophotographic
Printers, Publication # G544-3915, available at the following:
www.ibm.com
Third Party Enabler Features
Infoprint 2085 and 2105 support the following third party software enabler features:
● LCDS/Metacode Channel Software Enablement (feature numbers 6120/6121)
● LCDS/Metacode TCP/IP Software Enablement (feature numbers 6130/6131)
● LCDS/Metacode Enablement Accessories (feature numbers 6140/6141)
● LCDS/Metacode Sun Channel Hardware Enablement (feature numbers 6110/6111)
● LCDS/Metacode ESCON Channel Hardware Enablement (feature numbers 6150/6151)
● LCDS/Metacode TCP/IP Sun Blade (feature numbers 6160/6161)
Back to top
Product Positioning
The Infoprint 2085 and 2105 are multifunctional systems that complement the Infoprint 2000 and Infoprint 70. Each Infoprint 2085 and
http://gsmserv.boulder.ibm.com/cd/usmhw/M2785$01.htm (5 of 47)5/25/2005 7:01:07 AM
Family 2785+01 IBM Infoprint 2085
2105 can be used as a standalone copier, a networked printer, or both a copier and printer. The multifunctional system can also be
used in the datacenter as a high-production printer with multiple data stream support.
With a maximum monthly duty cycle of 800K impressions, the Infoprint 2085 and 2105 can be used in conjunction with the Infoprint 70
or as a backup printer for the Infoprint 2000.
Back to top
Models
Model Summary Matrix
Model Impressions Per Minute Average Monthly Usage
001 85 300,000
Maximum
Maximum Print Speeds
The maximum rated print speeds using A4/Letter paper long edge feed are as follows (Impressions Per Minute):
● Infoprint 2085:
❍ 85 ipm
● Infoprint 2105:
❍ 105 ipm
Maximum Copy Speeds
The maximum rated copy speeds using A4/Letter paper long edge feed once the image has been scanned and paper fed from tray 1
with no duplex, stapling or punching are as follows (Copies Per Minute):
● Infoprint 2085:
❍ 85 ipm
● Infoprint 2105:
❍ 105 ipm
Customer Setup (CSU)
Not available.
Devices Supported
Not available.
Model Conversions
Not available.
Back to top
Technical Description
Physical Specifications Operating Environment Limitations
Hardware Requirements Software Requirements
Technical Specifications
http://gsmserv.boulder.ibm.com/cd/usmhw/M2785$01.htm (6 of 47)5/25/2005 7:01:07 AM
Family 2785+01 IBM Infoprint 2085
First Print Out Times (FPOT)
First print-out time is the time from when the printer receives a start printing signal in "READY" state until one sheet of paper is printed
and delivered. The printer is in READY state <360 seconds after it is powered on at rated voltage.
The minimum engine first print out time for Infoprint 2085 and 2105 are listed below. These times in seconds represent A4 and letter
paper from tray 1 (letter) and tray 2 (A4) with no duplex, stapling or punching.
● Infoprint 2085:
Media Shift Bin
------------------- --------Letter LEF (tray 1) 6.2 sec
A4 LEF (tray 2) 6.6 sec
Note: LEF = Long Edge Feed.
● Infoprint 2105:
Media Shift Bin
------------------- --------Letter LEF (tray 1) 5.8 sec
A4 LEF (tray 2) 5.8 sec
Note: LEF = Long Edge Feed.
First Copy Times
First copy times is with the copier in "READY" state, originals in the ARDF and copy media in tray 1. This represents the time from the
user pressing the "START" button until the first simplex copy is delivered.
● Infoprint 2085:
Proof Bin Shift Bin
Media Face-Up Face-Down Face-Up Face-Down
---------- -------- --------- -------- --------A4 LEF 4.1 sec 5.4 sec 4.4 sec 5.6 sec
Letter LEF 4.1 sec 5.4 sec 4.4 sec 5.7 sec
Note: LEF = Long Edge Feed.
● Infoprint 2105:
Proof Bin Shift Bin
Media Face-Up Face-Down Face-Up Face-Down
---------- -------- --------- -------- --------A4 LEF 3.7 sec 4.7 sec 3.9 sec 5.1 sec
Letter LEF 3.7 sec 4.8 sec 3.9 sec 5.1 sec
Note: LEF = Long Edge Feed.
Copying Capability
http://gsmserv.boulder.ibm.com/cd/usmhw/M2785$01.htm (7 of 47)5/25/2005 7:01:07 AM
Family 2785+01 IBM Infoprint 2085
Infoprint 2085 and 2105 include a digital copier as standard. The copier is capable of a wide range of processing options including:
● Scan once/print many
● Four position stapling
● Integrated 2, 3 or 4 hole punch
● Large memory for storing jobs
● First copy speed of 3.8 seconds
● 1 - 9,999 quantity of any copy job
● Sort and Collate features
● Stack features, including offset
Infoprint 2085 and 2105 also support these advanced copy capabilities:
● Cover/Slip Sheet:
❍ Front Cover
❍ Back Cover
❍ Designate
❍ Chapters
❍ Slip Sheet
❍ Separation
● Edit Image:
❍ Margin Adjustment
❍ Border Erase
❍ Center Erase
❍ Delete Area
❍ 3 Side Full Bleed
❍ Image Repeat
❍ Double Copies
❍ Centering
● Duplex:
❍ 1 sided -> 2 sided
❍ 2 sided -> 2 sided
● Combine:
❍ 1 sided 2, 4, 8 or 16 pages -> combine 1 side
❍ 1 sided 4, 8 or 16 pages -> combine 2 side
❍ 2 sided 1, 2 or 4 pages -> combine 1 side
❍ 2 sided 2, 4 or 8 pages -> combine 2 side
● Series:
❍ Book -> 1 sided
❍ 2 sided -> 1 sided
● Book:
❍ Book -> 2 sided
❍ Multi -> 2 sided
❍ Booklet
❍ Magazine
● Reduce/Enlarge:
❍ Preset Reduce/Enlarge (preset ratios of 25%, 50%, 65%, 73%, 78%, 85%, 93%, 100%, 121%, 129%, 155%, 200%,
400%)
❍ Zoom of 25% - 400% in 1% increments
http://gsmserv.boulder.ibm.com/cd/usmhw/M2785$01.htm (8 of 47)5/25/2005 7:01:07 AM
Family 2785+01 IBM Infoprint 2085
❍ Size Magnification
❍ Directional Magnification
❍ Directional Size Magnification
● Stamp:
❍ Background numbering
❍ Preset stamp
❍ User stamp
❍ Date stamp
❍ Page numbering
● Output:
❍ Shift Tray off in sort/stack
❍ Separation
❍ Copy Face Up
The document editor includes the following features:
● Change file names
● Merge documents
● Insert files
● Delete pages
● Delete saved documents
Possible uses of the document server and editor include the following:
● On demand printing:
Save documents in the document server. When the documents are needed, print them anytime.
● Scanned file printing:
To combine several originals that are different such as damaged originals, photos, or one and two sided originals, scan them
into the document server using the best settings for each original. Then combine them into one file using the document editor.
Media Supported for Copying
The following paper sizes are supported in the ARDF:
ARDF ARDF ARDF
Paper Size NA & AP Eur. Japan
-------------------------- ------- ---- ----A4 (210x297 mm) SEF Y Y Y
A4 (210x297 mm) LEF Y Y Y
Letter (8.5"x11") SEF Y Y Y
Letter (8.5"x11") LEF Y Y Y
A5 (148x210 mm) SEF N Y Y
A5 (148x210 mm) LEF N Y Y
B5-JIS (182x257 mm) LEF N Y Y
B5-JIS (182x257 mm) SEF N Y Y
B4 (257x364 mm) SEF N Y Y
A3 (297x420 mm) SEF N Y Y
Ledger (11"x17") SEF Y Y Y
Legal (8.5"x14") SEF Y N N
Statement (5.5"x8.5") SEF Y N N
Statement (5.5"x8.5") LEF Y N N
Executive (7.25"x10.5")SEF N N N
Folio (8.5"x13") SEF N Y Y
http://gsmserv.boulder.ibm.com/cd/usmhw/M2785$01.htm (9 of 47)5/25/2005 7:01:07 AM
Family 2785+01 IBM Infoprint 2085
10 x 14 in. (10"x14") SEF Y N N
11 x 15 in. (11"x15") SEF Y N Y
8 x 10 in. (8"x10") SEF Y N N
8 x 10.5 in. (8"x10.5")SEF N N N
8 x 13 in. (8"x13") SEF Y N N
8.25 x 13 in(8.25"x13")SEF N N N
Custom Y Y Y
Original Media ARDF Tray
--------------- ------------Paper 16-32 lb bond
(52-128 gsm)
Card Stock 16-32 lb bond
(52-128 gsm)
Printing Capability
Input Media Capacities
Maximum capacities (sheets) based on 80 gsm, 20 lb bond are listed in the following table:
Total
Tray 1 Tray 2 Tray 3 Tray 4 Tray 5 Tray 6 Capacity
------ ------ ------ ------ ------ ------ -------Standard 2000(1) 500 500 3000
4.55K HCF 2000(1) 500 500 1000 1000 2550 7550
Installed
Note: (1) Tray 1 is a tandem (side-by-side) tray with 1000 x 2-sheets.
Output Media Capacities
Maximum capacities (sheets) based on 80 gsm, 20 lb bond are listed in the following table:
Shift Shift Shift
Proof Bin Bin Bin
Media Bin (w/o punch) (w punch) (w staple)
--------------------- ----- ----------- --------- ---------A4/Letter or smaller 500 3000 2500 2500
Larger than A4/Letter 250 1500 1500 1500
Media sizes supported by the input trays
North America and Asia Pacific (except for Japan)
Paper Size Tray 1 Tray 2 Tray 3 Tray 4 Tray 5 Tray 6
-------------------------- ------- ------ ------ ------ ------ ------A4 (210x297 mm) SEF Y(1) Y(2) Y(2) N N N
A4 (210x297 mm) LEF Y(3) Y(2) Y(2) Y Y Y
Letter (8.5"x11") SEF Y(1) Y Y N N N
Letter (8.5"x11") LEF Y Y Y Y Y Y
A5 (148x210 mm) SEF N Y(2) Y(2) Y Y Y
A5 (148x210 mm) LEF N Y(2) Y(2) Y Y Y
B5-JIS (182x257 mm) LEF N Y(2) Y(2) Y Y Y
http://gsmserv.boulder.ibm.com/cd/usmhw/M2785$01.htm (10 of 47)5/25/2005 7:01:07 AM
Family 2785+01 IBM Infoprint 2085
B5-JIS (182x257 mm) SEF N Y(2) Y(2) N N N
B4 (257x364 mm) SEF Y(1) Y(2) Y(2) N N N
A3 (297x420 mm) SEF Y(1) Y(2) Y(2) N N N
Ledger (11"x17") SEF Y(1) Y Y N N N
Legal (8.5"x14") SEF Y(1) Y Y N N N
Statement (5.5"x8.5") SEF N Y Y Y Y Y
Statement (5.5"x8.5") LEF N Y Y Y Y Y
Executive (7.25"x10.5")SEF N Y(2) Y(2) N N N
Folio (8.5"x13") SEF N Y Y N N N
10 x 14 in. (10"x14") SEF N Y(2) Y(2) N N N
11 x 15 in. (11"x15") SEF N Y Y N N N
8 x 10 in. (8"x10") SEF N Y Y N N N
8 x 10.5 in. (8"x10.5")SEF N Y Y N N N
8 x 13 in. (8"x13") SEF N Y Y N N N
8.25 x 13 in(8.25"x13")SEF N Y(2) Y(2) N N N
A4 Tab (210x297 mm) SEF N N N Y Y N
Letter Tab (8.5"x11") SEF N N N Y Y N
Custom (4) N Y Y N N N
Transparencies N Y(5) Y(5) Y(6) Y(6) Y(6)
Note: (1) Supported with optional A3/11" x 17" tray kit only.
Note: (2) Media supported in tray but dividers may move.
Note: (3) Requires CE setting the tray to support this paper.
Note: (4) Custom:
● min. size = 148 mm x 210 mm (SEF)
● max. size = 297 mm x 432 mm (SEF)
● Staple and punch not supported
● No provision for size information in messages
Note: (5) SEF and LEF supported.
Note: (6) LEF supported only.
Europe
Paper Size Tray 1 Tray 2 Tray 3 Tray 4 Tray 5 Tray 6
-------------------------- ------- ------ ------ ------ ------ ------A4 (210x297 mm) SEF Y(1) Y Y N N N
A4 (210x297 mm) LEF Y Y Y Y Y Y
Letter (8.5"x11") SEF Y(1) Y Y N N N
Letter (8.5"x11") LEF Y(3) Y Y Y Y Y
A5 (148x210 mm) SEF N Y Y Y Y Y
A5 (148x210 mm) LEF N Y Y Y Y Y
B5-JIS (182x257 mm) LEF N Y Y Y Y Y
B5-JIS (182x257 mm) SEF N Y Y N N N
B4 (257x364 mm) SEF Y(1) Y Y N N N
A3 (297x420 mm) SEF Y(1) Y Y N N N
Ledger (11"x17") SEF Y(1) Y Y N N N
Legal (8.5"x14") SEF Y(1) Y Y N N N
Statement (5.5"x8.5") SEF N Y Y Y Y Y
Statement (5.5"x8.5") LEF N Y Y Y Y Y
Executive (7.25"x10.5")SEF N Y(2) Y(2) N N N
Folio (8.5"x13") SEF N Y Y N N N
10 x 14 in. (10"x14") SEF N Y(2) Y(2) N N N
http://gsmserv.boulder.ibm.com/cd/usmhw/M2785$01.htm (11 of 47)5/25/2005 7:01:07 AM
Family 2785+01 IBM Infoprint 2085
11 x 15 in. (11"x15") SEF N Y Y N N N
8 x 10 in. (8"x10") SEF N Y(2) Y(2) N N N
8 x 10.5 in. (8"x10.5")SEF N Y(2) Y(2) N N N
8 x 13 in. (8"x13") SEF N Y(2) Y(2) N N N
8.25 x 13 in(8.25"x13")SEF N Y(2) Y(2) N N N
A4 Tab (210x297 mm) SEF N N N Y Y N
Letter Tab (8.5"x11") SEF N N N Y Y N
Custom (4) N Y Y N N N
Transparencies N Y(5) Y(5) Y(6) Y(6) Y(6)
Note: (1) Supported with optional A3/11" x 17" tray kit only.
Note: (2) Media supported in tray but dividers may move.
Note: (3) Requires CE setting the tray to support this paper.
Note: (4) Custom:
● min. size = 148 mm x 210 mm (SEF)
● max. size = 297 mm x 432 mm (SEF)
● Staple and punch not supported
● No provision for size information in messages
Note: (5) SEF and LEF supported.
Note: (6) LEF supported only.
Japan
Paper Size Tray 1 Tray 2 Tray 3 Tray 4 Tray 5 Tray 6
-------------------------- ------- ------ ------ ------ ------ ------A4 (210x297 mm) SEF Y(1) Y Y N N N
A4 (210x297 mm) LEF Y Y Y Y Y Y
Letter (8.5"x11") SEF Y(1) Y Y N N N
Letter (8.5"x11") LEF Y(3) Y Y Y Y Y
A5 (148x210 mm) SEF N Y Y Y Y Y
A5 (148x210 mm) LEF N Y Y Y Y Y
B5-JIS (182x257 mm) LEF N Y Y Y Y Y
B5-JIS (182x257 mm) SEF N Y Y N N N
B4 (257x364 mm) SEF Y(1) Y Y N N N
A3 (297x420 mm) SEF Y(1) Y Y N N N
Ledger (11"x17") SEF Y(1) Y Y N N N
Legal (8.5"x14") SEF Y(1) Y Y N N N
Statement (5.5"x8.5") SEF N Y Y Y Y Y
Statement (5.5"x8.5") LEF N Y Y Y Y Y
Executive (7.25"x10.5")SEF N Y(2) Y(2) N N N
Folio (8.5"x13") SEF N Y Y N N N
10 x 14 in. (10"x14") SEF N Y(2) Y(2) N N N
11 x 15 in. (11"x15") SEF N Y Y N N N
8 x 10 in. (8"x10") SEF N Y(2) Y(2) N N N
8 x 10.5 in. (8"x10.5")SEF N Y(2) Y(2) N N N
8 x 13 in. (8"x13") SEF N Y(2) Y(2) N N N
8.25 x 13 in(8.25"x13")SEF N Y(2) Y(2) N N N
A4 Tab (210x297 mm) SEF N N N Y Y N
Letter Tab (8.5"x11") SEF N N N Y Y N
170 x 210 mm LEF N Y Y N N N
182 x 210 mm LEF N Y Y N N N
210 x 340 mm LEF N Y(4) Y(4) N N N
http://gsmserv.boulder.ibm.com/cd/usmhw/M2785$01.htm (12 of 47)5/25/2005 7:01:07 AM
Family 2785+01 IBM Infoprint 2085
Custom (5) N Y Y N N N
Transparencies N Y(5) Y(5) Y(6) Y(6) Y(6)
Note: (1) Supported with optional A3/11" x 17" tray kit only.
Note: (2) Media supported in tray but dividers may move.
Note: (3) Requires CE setting the tray to support this paper.
Note: (4) Supported for copying only and not printing.
Note: (5) Custom:
● min. size = 148 mm x 210 mm (SEF)
● max. size = 297 mm x 432 mm (SEF)
● Staple and punch not supported
● No provision for size information in messages
Finishing Supported
Holes
Paper Size Duplex Staple(1) Punched(2)
------------------------- ------ --------- ---------A4 (210x297 mm) SEF Y Y 2
A4 (210x297 mm) LEF Y Y 2,3,4
Letter (8.5"x11") SEF Y Y 2
Letter (8.5"x11") LEF Y Y 2,3,4
A5 (148x210 mm) SEF Y N 2
A5 (148x210 mm) LEF Y N 2
B5-JIS (182x257 mm) LEF Y Y 2,3
B5-JIS (182x257 mm) SEF Y Y 2
B4 (257x364 mm) SEF Y Y 2,3
A3 (297x420 mm) SEF Y Y 2,3,4
Ledger (11"x17") SEF Y Y 2,3,4
Legal (8.5"x14") SEF Y Y 2
Statement (5.5"x8.5") SEF Y N
Statement (5.5"x8.5") LEF Y N 2
Executive (7.25"x10.5")SEF N Y
Folio (8.5"x13") SEF N Y 2
10 x 14 in. (10"x14") SEF Y Y 2,3
11 x 15 in. (11"x15") SEF N N 2,3
8 x 10 in. (8"x10") SEF Y Y 2
8 x 10.5 in. (8"x10.5")SEF Y Y 2
8 x 13 in. (8"x13") SEF Y Y 2
8.25 x 13 in(8.25"x13")SEF N Y 2
170 x 210 mm (170x210mm)LEF N Y 2
182 x 210 mm (182x210mm)LEF N Y 2
210 x 340 mm (210x340mm)LEF N Y
Custom (3) Y N
Transparencies N N
Notes: (1) When stapling all sheets must be the same size
(2) Punch designations refer to 2, 3, or 4 hole punch capability
(3) Custom: min. size = 148 mm x 210 mm (SEF)
max. size = 297 mm x 432 mm (SEF)
http://gsmserv.boulder.ibm.com/cd/usmhw/M2785$01.htm (13 of 47)5/25/2005 7:01:07 AM
Family 2785+01 IBM Infoprint 2085
Note regarding media support:
Note: Refer to IBM Document G544-3915 for paper specifications. Some print media, although they may conform to size and weight
specifications, may still not perform to your expectations. Print quality, jam rates, fuser life and output stacking can be affected by the
printing environment (temperature and humidity) and characteristics of the paper (structure, moisture content, smoothness and
thickness); IBM STRONGLY RECOMMENDS YOU TEST ADEQUATE AMOUNTS OF YOUR PRINT MEDIA USING YOUR PRINTING
APPLICATION TO ENSURE THAT YOUR PERFORMANCE EXPECTATIONS ARE MET PRIOR TO PURCHASING THIS PRINTER
OR LARGE QUANTITIES OF THE MEDIA OR RUNNING LARGE PRINT VOLUMES.
Media Sizes Supported by the Output Trays
Capacities based on 80 gsm, 20 lb bond.
All paper sizes are supported for duplex and jogging:
Proof Shift
Paper Size Bin Bin
----------------------- ----- ----A4 (210x297 mm) SEF Y Y
A4 (210x297 mm) LEF Y Y
Letter (8.5"x11") SEF Y Y
Letter (8.5"x11") LEF Y Y
A5 (148x210 mm) SEF Y Y
A5 (148x210 mm) LEF Y Y
B5-JIS (182x257 mm) LEF Y Y
B5-JIS (182x257 mm) SEF Y Y
B4 (257x364 mm) SEF Y Y
A3 (297x420 mm) SEF Y Y
Ledger (11"x17") SEF Y Y
Legal (8.5"x14") SEF Y Y
Statement (5.5"x8.5") SEF Y Y
Statement (5.5"x8.5") LEF Y Y
Executive (7.25"x10.5")SEF Y Y
Folio (8.5"x13") SEF Y Y
10 x 14 in. (10"x14") SEF Y Y
11 x 15 in. (11"x15") SEF Y Y
8 x 10 in. (8"x10") SEF Y Y
8 x 10.5 in. (8"x10.5")SEF Y Y
8 x 13 in. (8"x13") SEF Y Y
8.25 x 13 in(8.25"x13")SEF Y Y
170 x 210 mm (170x210mm)LEF Y Y
182 x 210 mm (182x210mm)LEF Y Y
210 x 340 mm (210x340mm)LEF Y Y
Custom Y Y
Card Stock Y Y
Transparencies Y Y
Media Supported
Print Media Trays 1,2,3 Trays 4,5 Tray 6
------------- ---------------- ---------------- ---------------Paper 52-163 gsm 52-216 gsm 52-163 gsm
(16-42 lb Bond) (16-52 lb Bond) (16-42 lb Bond)
(40-60 lb Cover) (40-80 lb Cover) (40-60 lb Cover)
(90 lb Index-no (90-110 lb Index (90 lb Index-no
tab) -no tab) tab)
http://gsmserv.boulder.ibm.com/cd/usmhw/M2785$01.htm (14 of 47)5/25/2005 7:01:07 AM
Family 2785+01 IBM Infoprint 2085
Card Stock Not Supported 52-216 gsm Not Supported
(16-52 lb Bond)
(40-80 lb Cover)
(90-110 lb Index
-no tab)
Tab Stock Not Supported 52-216 gsm Not Supported
(16-52 lb Bond)
(40-80 lb Cover)
(90-110 lb Index
-no tab)
Labels (1) Not Supported 52-216 gsm Not Supported
(16-52 lb Bond)
Note: (1) Labels supported in tray 5 only.
Infoprint 2085 and 2105 supports the following third party software enablers:
Third Party Company Products Supported
----------------------------------- ---------------------------------Rochester Software Associates (RSA) M.I.S. Print, WebCRD, DTPrint
Objectif Lune PlanetPress Design, PlanetPress
Watch, PlanetPress Search,
PlanetPress Fax, PlanetPress Image
Solimar Print Director/2000, SOLSearcher,
XIMAGE, Tukanda, iConvert, aConvert
Atlas Software PrintShop Mail
AHT Squadron, Fiber Gateway
XLPrint Paris, Paris Designer
T/R Systems MicroPress, Digital StoreFront,
M@estro, MicroImager
Safety Agency Approvals
● UL
● CSA (by c-UL)
● CE Mark (IEC 950)
● CS Mark (Germany)
● c-Tick (Australia)
● NOM (Mexico)
● VCCI Class A
Other Certifications
● FCC part 15 Class A
● CE Mark:
❍ EN55022 Class A
❍ EN55024 Class A
http://gsmserv.boulder.ibm.com/cd/usmhw/M2785$01.htm (15 of 47)5/25/2005 7:01:07 AM
Loading...