IBASE IBD189 User Manual

IBD189

SW1-1P

SW1-2P

F/W Upgrade Mode

OFF

OFF

Normal Mode*

ON

OFF

DFU Mode

Pin #

Signal Name

1

DATA H

2

Ground

3

DATA L

4

Ground

Signal Name

Pin #

Pin #

Signal Name

+3.3V

1 2 GND

TRST

3 4 TCLK

TDI

5 6 TDO

TMS

7 8 Reset

1ON2

21

4 3

41

2

8

6

4

1

7

5

3

CAN BUS CARD

PCI Express Mini Card V1.2

IBD189 and PK1-79 Mechanical Drawing

Mini PCI-E CAN Bus Card Driver Installation

1. In the Windows OS, go to the Computer Management screen. In the ‘Other
devices’ as shown, right click the “PCI Serial Port” Properties.

User guide 1.0

IBD 189 x 1 and PK1-79 x 2

Setting the Jumpers

SW1: Programmable Firmware Upgrade Setting

Default: Normal Mode, Pin 1,2 OFF

*Default

Connectors pin definition

CAN1, CAN2: CAN BUS Connector

1X4_1.25mm_Right Angle_Male_Wafer (E-CALL 0110-2620040, Mating connector:
Molex 53048-0410)

J3: JTAG (factory use only)

2X4_2.0mm_Straight_Male_Pin Header (E-CALL 0196-01-251-080)

2. In the PCI Serial Port Properties screen, click Update Driver.

3. In the Hardware Update Wizard screen, select “No, not this time” and click
Next to continue.

4. Select “Install from a list or specific location (Advanced), and click
Next to continue.

5. Choose “search” and “installation” options, click the checkbox of “Include
this location in the search”, and click Browse to find the driver’s path in the
CD provided or enter the path directly ­\IBD189_package\Driver\IBD189.inf

6. Click Install this driver software anywary.

7. Click Finish to close the wizard.

8. There are four serial ports. Therefore, the Hardware Update Wizard procedure will be
repeated for the other serial port.