iBall Andi 5Q Cobalt Solus, Andi 4 IPS Tiger, Andi 4p ips gem, andi 4.5v baby panther, andi 4.5P User Manual

Legal Information

All rights are reserved. Reproduction, transfer, distribution of the contents herein in any manner without the prior written permission of Best IT World (India) Pvt. Ltd. is prohibited. Best IT World (India) Pvt. Ltd. reserves the right to add, modify or delete, any of the contents herein or withdraw this document at any time without prior notice and without assigning any reasons thereof. For detailed terms and conditions refer www.iBallMobiles.co.in

Safety Precautions

Operate Safely

• Please do not use Mobile while charging. Disconnect Mobile from charger before use.

• Make sure to charge the battery full for the first time usage.

• Keep the mobile phone at least an inch away from your body while dialing /

answering calls.

• Do not use the mobile phone if the screen is cracked or broken. Cracked and / or broken screens could cause injury to hands and /or face.

• To reduce the risk of motion injuries:

- While using your mobile phone, hold it with a relaxed grip and press the keys lightly.

- Do not handle the mobile phone with wet hands.

- Use of special keys / features reduce the number of keys presses

- Take regular breaks in between calls.

- Use hands-free accessories.

- Switch off the mobile phone before cleaning it.

- Switch off the Mobile Phone and external power sources before any attempt to change batteries, SIM Cards or any other accessories.

- Keep your mobile phone and all accessories out of reach of small children and animals.

Careful handling

• Avoid potential damage to your mobile phones as under:

- Keep away from liquids.

- Avoid using and / or storing in dusty and / or dirty places / environments.

- Do not drop, knock, throw or otherwise handle the mobile phone roughly.

- Avoid exposing your mobile phone and / or batteries to extreme

temperatures. Extreme temperatures reduce the charging capacity and life of batteries and mobile phone.

- Never use damaged chargers or batteries.

- Do not use chemicals or other cleaning solutions to clean the mobile phone.

- Use moist or anti-static cloth.

- Avoid using mobile phone with camera flash or light close to the eyes.

-Mobile phone and / or accessories should be dismantle and / or repair by

service person only.

Turn Off In Restricted Areas

Use of mobile phones in certain areas / places / conditions can be hazardous.

• Switch off your mobile phone:

- Inside aircrafts;

- In Medical hospitals / clinics;

- Areas where chemicals are used and / or stored;

- Fuel and gas stations;

- In and around areas having electrical / electronic equipment;

- Areas where any kind of blasting activity is being carried out.

• Removing, installing or charging mobile phone batteries in such areas is

hazardous as potential sparks may result in explosion and / or fire and may cause damage to property and / or life and can also prove fatal.

Drive Safety

Avoid using your mobile phone while driving and respect and obey all regulations that restrict the use of mobile phones while driving. Primary consideration while driving should be safety.

Interference with Electronic Devices

Mobile phones emit Radio Frequency (RF) signals that may interfere with unshielded or improperly shielded electronic equipment, such as pace makers, hearing aids, other medical devices and other electronic devices in homes and / or vehicles and may prove to be hazardous.

Protect Your Hearing

Excessive exposure to high volumes may cause hearing problems. Maintain proper volume levels for conversations and / or music.

Use and Dispose of Batteries and Chargers

• Use only iBall accessories and batteries. Using incompatible batteries and / or accessories may damage your mobile phone or cause injury.

• Never dispose the battery or mobile phone in fire.

• Never crush or puncture the battery.

• Avoid exposing the battery to high external pressure, which can lead to an

internal short circuit.

• Never place batteries or mobile phone in or on heating devices, such as

microwave ovens, stoves or radiators. Battery may explode when overheated.

• In order to use mobile phone correctly, please read the following statement of the user manual carefully before using the mobile phone

SAR Value

• Your phone is designed not to exceed the limits of emission of radio waves

recommended by international guidelines.

• SAR (Specific Absorption Rate) is the measurement of body-absorbed RF

quantity when the phone is in use. SAR value is ascertained according to the highest RF level generated during laboratory tests.

• The SAR value of the phone may depend on factors such as proximity to

the network tower, use of accessories.

SAR recommendations:

• Use a wireless hands free system (headphone, headset) with lower

Bluetooth emitter.

• Make sure the cell phone has a low SAR.

• Please keep your calls short and use SMS whenever more convenient.

This advice applies especially to children and pregnant women.

• Prefer to use your phone when the signal quality is good.

• People having active medical implants should preferably keep the phone

at least 15cm away from the implant.

SAR Value

Tested SAR Value of Andi 5Q Cobalt Solus is as follows:

(2G) GSM 900MHz: 0.966 W/Kg (1g)

(2G) GSM 1800MHz: 0.7 W/Kg (1g)

(3G) WCDMA 2100MHz: 0.723 W/Kg (1g)

Maximum Permitted SAR value is: 1.6 W/Kg (1g)

In order to use mobile phone correctly, please read the following statement of the user manual carefully before using the mobile phone.

Index

Legal Information ..................................................................... 1

Safety Precautions .................................................................... 2

SAR Value ................................................................................ 8

Index ....................................................................................... 10

1. Introduction ........................................................................ 12

2. Contacts .............................................................................. 38

3. Messaging ........................................................................... 43

4. E-Mail ................................................................................. 51

5. Settings ............................................................................... 57

6. Internet................................................................................ 95

7. Multimedia ....................................................................... 102

8. Others ................................................................................ 111

9. Applications ...................................................................... 125

10. Troubleshooting .............................................................. 128

1. Introduction

1.1 iBall Andi 5Q Cobalt Solus

Specifications

Details

Description

CPU

Powerful Octa Core 1.4Ghz advanced Cortex A7 Processor

Display

12.7 cm (5”) HD (1280x720) (289 ppi) Display, OGS Touch Panel, Durable rear panel with an elegant glass finish

Memory

2GB RAM

Storage

16GB Built in Storage(approx. 7GB for user & 6GB for

applications)

Micro SD Support up to 32 GB

Android

Android™ 4.4, Kitkat®

Yes

Connectivity

Support Dual SIM dual standby(Both SIM slot support 3G Micro SIM) GSM900/1800MHz; WCDMA 2100MHz; 3G HSPA + 21Mbps downlink,

5.6Mbps uplink, EDGE Class 12 / GPRS, Wi-Fi

802.11 a/b/g /n, Bluetooth V4.0+EDR, OTG Function.

Camera

Enhanced 13MP AF Camera with LED flash Enhanced 5MP front camera for video Calling.

Sensor

G sensor, Proximity sensor and Light sensor

Audio Formats

mp3, ogg, wav, aac, amr, flac, midi

Video Formats

3gp, mp4, avi, 3g2, m2ts, webm

Image Formats

Jpg, bmp, png, wbmp

Audio Port

3.5 mm stereo jack

Soft Keys

Menu, Home key & Back

Hardware Keys

Power, Volume controller

Charging Port

Micro USB

Battery / Power

2250 mAh(Nom-removable) / 5.0V

Dimension & weight

143.9 x 72.0 x 8.3 mm with 135 Gram

1.2 Know Your Device

1.3 Installing the SIM card and

storage card

You need to remove the SIM card adaptor before you can install the SIM card and you need to remove back cover to install SD card. Also, make sure to always turn off the power before installing or replacing the SIM card and SD card.

To Install Micro SIM card

If you don‟t have a micro SIM card, contact your mobile service provider.

They should also activate your micro SIM card so you can start using it right away.

1. Make sure your device is turned off.

2. Look for the SIM card tray, which is located on the left side of the phone. Insert the SIM ejection tool (that comes with the phone) into the eject button, which is the small hole just upper side to the tray door.

3. Push ﬁrmly but gently until the tray pops out.

4. Remove the tray and place the micro SIM cards inside it, matching the

angled side of the card with the tray.

5. Carefully push the tray back into the phone.

To install a memory card

To have additional storage for your images, videos, music, and files, you can purchase a memory card and install it into your device.

1. Make sure that your device is turned off, and then remove the back cover.

2. Locate the memory card slot on the upper part of the exposed right panel.

3. Before inseting memory card into slot please make sure to apply given

memory card removal (Black) tape on to memory card. It make ease to remove memory card without removing battery.

4. Insert the memory card into the slot with its gold contacts facing down

until it clicks into place.

Note:

• The phone supports dual SIM cards and both SIM slots supports 3G

network but at a time only one SIM card can be enable as 3G.

• Some legacy SIM cards may not function with your device. You should

consult with your service provider for a replacement of SIM card. There may be some fees for this service.

• Battery is non-removable.

Charging the Battery

New batteries are shipped partially charged. Before you start using your device, it is recommended that charge the battery. Some batteries perform best after several full charge/discharge cycles. Note: Only the AC adapter and USB sync cable provided with your device must be used to charge the device.

Connect the USB connector of the AC adapter to the sync connector on your device, and then plug in the AC adapter to an electrical outlet to start charging the battery.

As the battery is being charged while the device is on, a charging icon appears in the title bar of the Home screen. After the battery has been fully charged, a full battery icon appears in the title bar of the Home screen.

Warning:

• As a safety precaution, the battery stops charging before it overheats.

1.4 Quick setting panel

1. Owner: The information of the owner can be stored and then can be

displayed on the lock screen.

2. Battery: Select this to view the level of battery in Percentage on your

Notification Bar.

3. Settings: This is the shortcut to go to the settings panel.

4. Wi-Fi: Using this you can turn Wi-Fi On/Off.

5. Bluetooth: Using this you can turn Bluetooth On/Off.

6. Location: Using this you can turn On/Off location access and by long

pressing you can go for location setting directly.

7. Airplane Mode: Selecting this option activates the airplane mode, which

means it cuts you off from all kind of network connectivity including your SIM network, Bluetooth, Wi-Fi network or any other network your handset supports.

8. Data connection: Using this you can turn the data connection On/Off.

Data connection helps you access internet using your SIM network.

9. Data Usage: It provides a graphical representation of the data usage for

a specified Data Usage cycle through SIM Internet or Wi-Fi.

10. Audio Profiles: This option allows you to select the audio profiles out of

the 4 predefined profiles, general, silent, meeting and outdoor.

11. Brightness: Using this option you can change the brightness level of

the display screen according to your needs and usage.

12. Auto Rotation: Using this option you can select whether or not you

want to use the auto rotation option.

13. Cast Screen: For connecting to wireless display supported devices.

All the functions have been explained in details in their respective sections.

Note: On long pressing on these options you will be directed into settings

option from there you can operate further if you want to use more related functions.

1.5 Starting up the device

Power on/off

To power off your phone, press & hold POWER. On release, the Phone options menu opens. Select „Power off‟ and confirm.

To power on again, press & hold POWER.

Silent mode

To silence your phone quickly, press & hold the – volume down button to zero volume. Or on the Home screen, touch and select Settings > Audio profiles. Select „Silent‟ check box.

Screen sleep

After a period of inactivity, your screen will go to sleep (display will turn black). In sleep, your phone uses less battery power. You can control this behavior:

Set screen timeout period

1. On the Home screen, touch and select Settings.

2. Select Display option.

3. Select Screen Time out and Select a time from the menu.

Prevent sleep while charging

1. On the Home screen, then touch and select Settings.

2. Select Developer options.

3. Select „Stay awake’ check box.

Lock screen & put phone to sleep

Except when on a phone call, from any screen, press POWER key (immediately). While not on a call, to lock your control buttons and screen from accidental touch activation, press POWER key.

You can increase the security of your phone by setting Screen unlock pattern. Once set, in order to unlock your screen, you‟ll have to draw the correct unlock pattern. You can set your screen unlock pattern as follows:

1. On the Home screen, touch and select Settings.

2. Select Security and then select Screen lock pattern section.

3. Set or change your unlock pattern by selecting Screen lock pattern, as

applicable.

4. Follow the prompts to define your pattern.

Note: You must slide your finger along the screen to create the pattern, and not select individual dots. Connect at least four dots to create a lock pattern.

If you want to hide pattern as you draw it, clear „Make pattern visible‟ check box.

1.6 Home screen

The Home screen is your starting point for using all the applications on your phone. You can customize your Home screen to display applications, shortcuts, and widgets as you like.

1. Touch the application tab with your fingertip to reveal the application

icons.

2. The Home screen actually extends beyond the screen width. On Home

screen, swipe your fingertip left and right along the screen to reveal the full width of the Home screen. This additional space gives you more room to customize Home with applications, shortcuts, and widgets.

3. Create Home screen shortcuts and widgets:

• Touch the application tab with your fingertip to reveal the application icons,

slide your fingertip right to show the shortcuts and widgets.

• Select an Application shortcut, a Shortcut to some of your saved

information (such as a play list), a Widget (a clock or picture frame) for your Home screen.

• The application, shortcut, folder, or widget appears on Home screen.

Tip: To create an application shortcut quickly, touch the application tab to reveal all the application icons, then touch & hold an application icon. Its shortcut is added to the Home screen; close the application tab to see it.

4. To remove a shortcut or widget from your Home screen, touch & hold the

item to enter “move mode”. The application tab turns into a Trash button.

Drag the item to the Trash button and release. You‟ll know when your item is

in the Trash because the item and the tab will turn red.

5. Move objects on the Home screen

• To move an icon or other item on the Home screen, you must first touch &

hold it to enter move mode. The object will magnify when it is ready to be moved.

• Without lifting your finger (or you‟ll drop out of move mode), drag the object

to the new position. To move an item to a section of the Home screen not in view, move it to the edge of the screen and hold it there for a moment. The screen view will shift; position the object and release.

1.7 Status Icons

Connection status icons

Along the top of your phone screen is the status bar. On the left side, icons will appear, notifying you of a new message, upcoming calendar event, or

something else you should notice. On the right side of the status bar, you‟ll

see connection status icon

Read your notifications

When you see a notification in the status bar, touch the bar and drag it down the screen using your finger to open the list of notifications displayed in the sliding window.

Ongoing notifications report activities such as call forwarding ON, current call status, song playing.

Notifications report the arrival of new messages, calendar events, and

alarms. You can clear notifications list by selecting „Clear‟ notifications at the

top of the notifications window.

To open the message, reminder, or other notification, you can touch the items. To close the notifications window, you can drag it upside.

Notes: On the home screen, touch the bar and slide your finger down the screen to open the list of notifications displayed in the sliding window, you can touch the icon on the top of the screen (such as Wi-Fi, Bluetooth, Data connection, Airplane mode, Brightness) to open or close the selected function, sliding your finger left or right to select more functions.

1.8 Using phone features

1. Turning the phone function on and off

To enable or disable Airplane Mode

In many countries, you are required by law to turn off the phone while on board an aircraft. Another way to turn off the phone function is to switch your device to Airplane Mode.

When you enable Airplane Mode, all wireless radios on your device are turned off, including the phone function, Bluetooth, and Wi-Fi.

1. Touch -> Settings -> More settings… -> Airplane mode.

2. Touch „Airplane mode‟ to enable or disable.

When you disable Airplane mode, the phone function is turned back on and the previous state of Bluetooth and Wi-Fi are restored.

Adjusting the volume

Press Volume button on the side of the phone to show the volume screen. If the phone is in vibrating mode, the voice will be muted automatically and the device will vibrate when there is an incoming call.

2. Making a call

On Home screen, touch -> Phone to enter the dial screen.

Touch the on-screen dial pad to enter a number, To dial a number, touch

„Voice Call‟ button (Green icon ) to select SIM1 card or SIM2 card to make a call. To end a call, touch „END‟ button (Red icon).

1. Call log tab: Select an entry listed in the log to call the number.

2. Contacts tab: Contacts with phone numbers are listed. Select a contact,

and then select the phone number to dial the call.

Note: If you insert 2 SIM cards, the dial screen by default asks for the dialing SIM. (Defined in the menu Settings/SIM management/Voice call)

Making a video call

Touch the on-screen dial pad to enter a number, touch „Video Call‟ button to make a video call.

Notice: • SIM1 slot can be supported video call default (SIM1 card must be

supported 3G network).

• Your phone must be in of the normal WCDMA network coverage, and the

other side (the receiver‟s phone and SIM card) can also be supported the

video call function of 3G.

3. Answering and Ending a call

When you receive a phone call, the incoming voice call screen will appear, allowing you to either answer or ignore the call.

1. To answer an incoming call, slide „ANSWER‟ (Green icon) button

rightward.

2. To reject a call, slide „REJECT‟ button (Red icon) button leftward.

4. In-call options

While on a call, reveal the in-call options: Speaker, Mute, Hold, End.

Note that if Bluetooth services are on and you are connected to a hands-free device, the more menu indicator will show Bluetooth on.

1. Speaker: To use the speaker, select „Speaker‟ so it shows a green bar.

To turn it off, select it again so the bar is unfilled. The status bar will display this icon when the speaker is on.

2. Mute: To mute your side of the conversation, select „Mute‟ so it shows a

green bar. To turn it off, select it again so the bar is unfilled. The status bar will display this icon when Mute is on.

3. Hold: To put an active call on hold, select „Hold‟ so it shows a green bar.

To resume the call, or take the call off hold, select it again so the bar is unfilled. If you take a call while already on a call, the first call will be placed on hold automatically. The status bar will display this icon when a call is on hold.

4. Add call: If you need to enter numbers while on a call, touch „Add call‟.

5. Incoming call: During call in progress, if you are on a call (“call in

progress”) when another call comes in (“incoming call”), you have a few

choices:

• Answer the incoming call and place the call in progress on hold. To switch

calls at any time, touch „Swap calls‟.

• If you don‟t want to interrupt your call in progress, then touch „END‟.

• If you have one call in progress and one caller on hold, to end both calls,

touch „End all‟.

6. While on a call, you can conference up to six callers, counting yourself.

Note that you can also have an additional caller on hold during a conference call, regardless of how many participants are on the conference.

Dial Pad: You can use the dial pad while call.

Note: Whether the group call function can be used depends on whether the network operator supports and provides such function as well as whether you have applied for such function. Please contact network operator for details.

5. Using call history

1. The missed call icon appears in the notification bar when you

missed a call.

2. Use „Call log‟ tab to check who the caller was, or view all your dialed

numbers, and received calls. To open „Call log‟ tab, touch „Call log‟ button in

the phone screen to enter the call history list.

3. Scroll to select the contact or number you want to dial, touch „Call‟ button.

4. Tap and hold the selected contact you want to call, and then you can

make to do the following options of call, edit number before call, send text

message, add to contacts or remove from call log phone on the shortcut menu.

6. Call settings

On the dialing screen or call log screen, press MENU > Settings to enter Call settings: You can make the operation of voice call, voice call and the other settings.

Note that when you open „Call settings‟ for SIM1 or SIM2, your current

settings are fetched, which can take a few moments.

Voice Call

Voicemail: Select to set a voicemail number that isn‟t being read from the SIM card.

IP prefix number: IP number setting to make an IP call with prefix number.

Call forwarding: Select how you want busy, unanswered, and unreachable calls to be handled. There is also an option to Always forward.

Call barring: Restrict to answer or dial the call in any situation. You need to apply to the network operator for opening the international long-distance function and get network restricting code for barring setups.

Advance settings: From this setting you can set your Caller ID preference and turn on/off call waiting.

Video Call

Local video replacement: you can set the picture display when your camera is off

Display peer video: display picture for replacing peer video when it is unavailable.

Peer Video replacement: To set a picture for replacing a peer video when it is unavailable.

Enable back camera: Available to switch Camera if turn ON.

Bigger peer video: Turn on to make peer video bigger than local video

Auto drop back: drop back to voice call connecting automatically

Outgoing Video calls: Display local video when make a video call.

Video Incoming call: Display local video when accept an incoming video call.

Call forwarding: Forward the calls with Always forward, forward when busy, Forward when unanswered and Forward when unreachable.

Call barring: it is availed for video calls with this features All Outgoing calls, International outgoing calls, all incoming calls, Incoming call while in roaming and Cancel all. You can also change the barring password.

Advance settings: From this setting you can set your Caller ID preference and turn on/off call waiting

Call settings

Smart Answer: Let the phone close to ear to answer the incoming calls automatically.

Dial from SMS Directly: If you are messaging a contact and suddenly decide to call said contact, you should just pick up the phone and hold it to your ear and the contact will be called.

Dial in Contacts Directly: While n contact information page, let phone close to your ear can dial its number automatically.

Flip to mute: Turn over the phone to mute incoming call.

Shake to Answer: You can answer incoming calls by shaking your handset.

Auto Call Recorder: Record all your important active call, which help you to listen your conversation again.

Emergency call: To call to an Emergency number long press the volume up key in lock screen.

Other Settings

Fixed Dialing Numbers: This feature allows you to restrict outgoing calls to a fixed set of numbers. To enable this feature you must know the SIM PIN2 code for your phone. You can get this number from your wireless operator, assuming this feature is supported.

Minute Reminder: The Small beep sound will remind you after very minute while call is active.

SMS on Call Reject: Reject the Incoming call with the use of Message, the common templates are already denied there in your phone

TTY mode: This tool allows deaf or hearing-impaired individuals to communicate via the slide by typing text messages.

2. Contacts

The contacts on your phone are synced with your account contacts stored on the Web.

To view the contacts on your phone, touch and select Contact.

Contacts belonging to a specific group (you can choose which group) are

listed in the Contacts tab. Only those contacts you star as “favorites” are

listed in the Favorites tab. Browse through your contacts by sliding your fingertip up and down on the screen.

Another way to find a contact quickly is to use “SEARCH” button, input the

first letter of the name you‟re looking for and touch search icon, the

matching contacts are appeared on the screen.

From the Contacts tab, you can:

1. Take action on a contact: Touch the contact‟s name to open the context

menu. From the menu you can select to view the Contact details screen, call

the contact‟s number, send a text message, add or remove a star, edit the

contact details, or delete the contact.

2. Go to Contact details: Select the contact‟s name to open the Contact

details screen, where all screen the information you‟ve saved for this

contact is displayed.

Add a contact

1. On the Home screen, then touch and select People. Your contact list appears.

2. Touch the + icon on the bottom of the screen to add new contact.

3. Add all the information you want to store for this contact in the appropriate fields. You must add some information to save a contact. To change a default label, select the label name to open the label menu. Select a

different label or create a custom label. To add more fields, select „Add

another field‟.

4. You can assign a Caller ID icon to your contact by touching Caller ID icon. The Pictures application opens. Navigate to a picture and select it, size

the cropper with your fingertips. When finished, select „Crop‟. The picture

is associated with your contact. If you do not assign an icon, a default android icon will be assigned.

5. To save your contact, press BACK, or touch „Done‟.

Assign favorites

Use Favorites as a way to display only those contacts you contact most frequently. To add a contact to Favorites:

1 From Contacts, touch the contact you want to add to Favorites to open the Contact details screen.

2. Touch the star icon on the right-top screen, and the color of star is

changed from grey to white.

3. Now your contact will be listed in Favorites.

Edit contact details

You can always make changes to the information you‟ve stored for a

contact:

1 From Contacts, touch the contact you want to add to Favorites to open the Contact details screen.

2. Select „Edit‟. The Edit contact screen appears.

3. Make your changes, then press „Done‟.

Communicate with a contact

From Contacts you can quickly call or text a contact‟s default number, as displayed below their name on the screen. However, to view all the

information you‟ve stored for a contact, and to initiate other types of

communication with that contact, open the Contact details screen. To open a contact‟s details screen, simply select their name from Contacts.

1. Call a contact: From the contact list, touch the contact you want to open

the Contact details screen. Touch the call number directly to dial that

contact‟s primary number (first in the list on their details screen).

2. To dial a different number for the contact, select the contact‟s name, and

then select the number on their details screen and then touch the call number that you want.

3. Send a text or multimedia: To send a text or multimedia message to a

contact, you must have a message to a contact mobile number stored for them in contact details. From the Contact details screen, select a phone

number and click „Message‟ icon, A Compose screen opens for your new

message. Complete your message and select „Send‟.

4. Send email to a contact: To send an email message to a contact, you

must have an email address stored for them in their contact details.

• Select the contact you want to email. Their Contact details screen opens.

• In the Send email section, select the email address. If you are fetching

POP3 or IMAP email accounts to your phone, then select the account you wish to use to send. A Compose screen opens for your new message.

• Complete your message, select „Send‟.

SIM contacts importer

If you have stored names and phone numbers on your SIM card, you can add these to the Contacts stored on your phone by selecting this settings

option. From the contact list, press MENU to select „Import/export‟, you can

select to import from SIM card or memory card, once the list of names and numbers appears you can:

Import all names/numbers in the list - Press MENU and select „Import all‟.

Import only certain names/numbers in the list - Select the name/number you want to import, then repeat for others as you wish. (As soon as you select the name/number, it is imported).

3. Messaging

SMS and MMS messaging

To open the SMS & MMS Messaging application, on the Home screen, then touch and select the Messaging icon.

About text and multimedia messages

SMS messages are also known as “text” messages and can each be around 160 characters. If you continue to type after the limit is reached, your message will be delivered as one, but count as more than one message. These are called “concatenated” messages.

MMS messages are also known as “multimedia” or “picture” messages and can contain text, picture, audio, and video files.

When you compose a message, the phone will automatically convert a text message into a multimedia message as soon as you add a subject or an attachment, or if you address the message using an email address rather than a phone number.

View the message from the message list

Select a message thread in the list to open it for reading. When open, the individual messages appear stacked on the screen, much like with instant messaging conversations (or chats).

Note that messages you send are also listed in the Read view.

1. Reading multimedia messages

If you have selected to auto-retrieve your multimedia messages, then both the message header and body will download.

If you are downloading only the headers, then you must first select the Download button to retrieve the message body. If you are concerned about the size of your data downloads, you can check the message size before you download.

Once the message has downloaded, select “Play” button to view the message.

From a message read view, you can do the following:

1. To view details about a particular message, in the Read view, touch &

hold the message to open the context menu. Select View details.

2. Reply to a message: Simply start typing your message in the text box at

the bottom of the screen to reply to a message. You can always press MENU and select to add a subject or an attachment to convert it to a multimedia message. Select „Send‟ when ready.

3. Links in messages: If a message contains a link to a Web page, it will be

selectable. To view the Web page in the Browser, simply select it.

4. Delete messages: Your messages will be saved until you explicitly delete

them.

Delete one message in a thread - With the message thread open in Read view, touch & hold the individual message you want to delete to open the context menu. Delete all messages in a thread - With the message thread open in Read view, press MENU >Delete. You can also delete an entire thread from the message list by pressing & holding the thread to open the context menu, then select „Delete‟.

Delete all message threads - From the message list, press MENU and select delete all threads.

Compose text and multimedia messages

1. Touch „Compose‟ icon. The Compose screen opens.

2. Add recipients by typing a name, phone number, or email address in the

„To‟ field. Matching contacts will appear. Select the recipient or continue

typing. Add as many recipients as you wish. If you send the message to an email address, the message will automatically convert from a text to a multimedia message.

3. To add a subject, press MENU and select „Add subject‟. If you add a

subject, the message will convert to a multimedia message.

4. To add an attachment, touch „Attach‟ icon on the right-top of the screen.

Adding an attachment will always convert the message to a multimedia message. Select from audio or picture files. You can select to take a new picture if you want, or record an audio file.

Any recordings you make will be stored automatically in the Music

application in a play list named “My recordings”. To remove an attachment,

select the attachment‟s „Remove‟ button.

5. Type your message. As you type, you‟ll be able to track how many

characters/messages you‟re creating. Remember that text messages have

a limit around 160 characters. Once you go over that limit, a new message is actually created but automatically joined into one when received.

6. Select „Send‟ when ready. You can also save a draft.

7. As your message sends, progress displays in the title bar. If you see this

icon to the right of the message, it means your message is still being delivered.

Save message as draft

While composing, press BACK, your message automatically saves as a draft.

Text and multimedia message settings

To set text and multimedia message preferences, from the message list,

press MENU and select „Settings‟. You can set the following from this

screen:

1. Notification settings

You can receive a notification each time you receive a new message.

Select „Notifications‟ check box to receive a notification in the status bar

when a new message arrives. If you want your phone to ring when a new message arrives, select that check box as well. Select Ring tone to open the ring tone menu and select a ring tone specific to new text and multimedia message notifications. Note that when you check a ring tone, it plays briefly.

If you want your phone to vibrate when you receive a new message, select „Vibrate‟ check box.

Text message settings

Request delivery reports: To receive a report on the delivery status for each of your message, select this check box.

Manage SIM card messages: Text messages can also be stored on your SIM card. The exact SIM card number depends on your card, but it is usually around 25-50. To view messages on your SIM card, delete them, and copy them to your phone memory, select this setting.

3. Multimedia message settings

Delivery reports: To receive a report on the delivery status of your message, select this check box.

Read reports: To receive a report on whether each recipient has read or deleted the message without reading it, select this check box.

Auto-retrieve: To retrieve all your MMS messages automatically (the header plus the message will download to your phone), select this check box. If you clear this check box, then only the message headers will be retrieved and

display in your message list. You can retrieve the full message by selecting the Download button that displays in the header. Once the message has downloaded, select the “play” button to expand the message.

Roaming auto-retrieve: If you are concerned about data traffic and just want the message headers to download while roaming, clear the Roaming auto-retrieve check box. Otherwise, you can select this check box to have your messages download even while roaming.

4. E-Mail

7.1 Add an email account

You can fetch messages from up to five POP3 or IMAP accounts. Follow these steps:

1. On the Home screen, then touch and select Email application.

2. The Set up new account screen appears.

3. Type your account email address and password.

4. If you want, select the Send email from this account by default check box.

This setting only applies if you have more than one POP3 or IMAP account set up. (For this details please contact your IT support team)

5. Select „Next‟.

If you have a popular email account, the application will set everything up for

you! Before you go to your Inbox, you can name the account (if you don‟t,

your email address will be used). You are also asked to type your name as you want it to display on outgoing messages. You must complete this field before you can select „Next‟ and go to your Inbox.

For less popular accounts, follow the prompts to type the email server, protocol, and other account information yourself. After your account settings have been verified, select „Next‟ to go to your Inbox.

6. To add more accounts (up to five), from an Inbox or your Accounts screen,

press MENU and select „Add account‟.

7.2 Use your POP3 and IMAP email

account

Once you‟ve set up an account, you can do the following:

1. Refresh Inbox: From the Inbox, press MENU and then select „Refresh‟ to

update your Inbox with any previously-un-fetched email.

2. Read email: You can display or collapse the messages in your Inbox by

selecting Inbox. Unread messages display with a colored band. (Each account you add will use a different color.)

3. Forward, Reply and Reply all: You can forward, reply, or reply all to an

email message from the Inbox. From the Inbox, touch & hold the message to open its context menu. Select the action you want to take.

4. Compose new

From the Inbox: 1. Press MENU and select „Compose‟. 2. Add recipients by

typing a name or address in the „To‟ field. Matching contacts will appear.

Select the recipient or continue typing the address. Add as many as you wish. 3. Type a subject and message.

5. Select „Send‟, „Save as draft‟, or „Discard‟. Pressing BACK will also save

as draft unless you have not typed anything.

6. Delete message

From the Inbox: 1. Expand the Inbox to display the messages. 2. Touch &

hold the message you want to delete. 3. Select „Delete‟. 4.Your message is

moved to the Trash.

7. Empty Trash: Once you‟ve moved a message to the Trash, to empty

messages in the Trash you must delete each message individually. Press MENU and select „Folders‟ to enter the Trash.

Note that the message is only deleted from your phone, not from the account server.

8. Remove an email account: You can always remove a POP3 or IMAP

email account from your phone. Go to your Inbox, press MENU and select

„Accounts‟. Your Accounts screen opens. Touch & hold the account you want to remove to open the context menu.

Select „Remove account‟. You will be asked to confirm before the account is

removed.

Edit account settings

To open your Account settings screen, do the following:

1. From your account Inbox, press MENU and select „Account settings‟.

2. The Account settings screen appears. You can do the following from this

screen:

Account name: Select to change the name of your account as it appears on your Accounts screen.

Your name: Select to change your name as it appears in outgoing email.

Email check frequency: Select this pop-up menu to set how frequently your email account is checked for new messages. Note that whenever you open a folder, email is refreshed, regardless of this setting.

Default account: If you have more than one POP3 or IMAP email account set up on your phone and want to use this account by default when selecting Compose from the Accounts screen, select this check box.

Email notifications: If you want an icon to appear in the status bar when a new message arrives, select this check box.

Incoming server settings: Select Incoming settings if you need to edit the username/ password, server, port, or option to delete email from server.

Outgoing server settings: Select Outgoing settings if you need to edit the SMTP server, port and security type, option to require sign-in or username/password.

Add another POP3 or IMAP

To add another account (you can add up to five), go to your Inbox, press

MENU and select „Accounts‟. Your Accounts screen opens.

Press MENU and select „Add account‟ another account.

5. Settings

Control phone-wide settings from the Home settings screen touch and select Settings.

Wireless & networks

5.1 SIM management

You can select to activate or deactivate the SIM card you want to open.

Set the default SIM to use voice call, Video call, and messaging and data connection.

5.2 Wi-Fi

Wi-Fi on/off: Select this option if you prefer to use Wi-Fi for your data connection. You can activate Wi-Fi by toggling the switch left/right to On/Off Wi-Fi connectivity.

Wi-Fi settings: Open the Wi-Fi settings screen. Select it from the network list. Provide your username or password if required

Scan: To scan the available Wi-Fi networks.

WPS Pin Entry: Any wireless computer or wireless adapter that will connect

to the modem router wirelessly is a client. The client must support a WPS PIN, and must have a WPS configuration utility.

Wi-Fi Direct: Using Wi-Fi direct feature, you can transfer data from one device to another through Wi-Fi without the need of an access point.

Advanced: This option contains the following features:

Network notification: By default, when Wi-Fi is on, you receive

notifications in the Status bar when your device detects an open Wi-Fi network. Uncheck this option to turn off notifications

Keep Wi-Fi during sleep: To conserve mobile data usage, your device stays connected to Wi-Fi when the screen goes to sleep.

Scanning always available: To improve location accuracy and for other purposes, Google and other apps may scan for nearby networks, even when Wi-Fi is off.

Install certificates: Here you can see and add your certificate.

Wi-Fi Optimization: To minimize the battery usage when Wi-Fi

is ON.

Passpoint: Wi-Fi Passpoint enables the device to search for and connect to a certified Wi-Fi network. You can use the

Passpoint feature to connect to public Wi-Fi networks that support automated authentication. When you move to a new location it will search for and connect to another certified Wi-Fi network.

Note:-This feature may not be available depending on the

region.

Tap → Advanced, and then tick Passpoint.

MAC address: The Media Access Control (MAC) address of your device when connected to a Wi-Fi network

IPv6 address: The latest Internet Protocol (IP) address

assigned to the device by the Wi-Fi network you are connected to (unless you used the IP settings to assign it a static IP address).

IPv4 address: The Internet Protocol (IP) address assigned to the device by the Wi-Fi network you are connected to (unless you used the IP settings to assign it a static IP address).

5.3 Bluetooth

Bluetooth on/off: Use this check box to turn Bluetooth services on or off.

Bluetooth settings: With Bluetooth services on, you can open the Bluetooth settings screen to:

• Rename Phone:

1. Make sure you have turned Bluetooth on.

2. Select Settings > Bluetooth > Bluetooth settings > Device name.

3. Type the name for your device in the dialog box, and then select „OK‟.

4. Your new device name appears on the Bluetooth settings screen.

• Visibility timeout: Set the visibility time or you can select “never time out”.

• Show received file: You can get a path where you have received the file

through Bluetooth.

• Advance Settings

You will get the option of FTP server, Remote

• Pair or Unpaired with one of the Bluetooth devices in range - You will be

asked to type a PIN before pairing. Refer to the manufacturer‟s

documentation for the PIN code.

• Rescan for devices.

You can use Bluetooth to send and receive calls using a headset or hands-free car kit.

Turn on Bluetooth services

1. On the Home screen, then touch and select Settings.

2. Select Bluetooth, and then select „Bluetooth‟ check box to turn on

Bluetooth services.

3. When on, the Bluetooth icon appears in the status bar.

Discoverability

By default, your phone is not “discoverable”. This means other Bluetooth

devices will not see your phone in their scans for Bluetooth devices. If you make your phone discoverable, it will be visible to other Bluetooth devices for up to 120 seconds.

To make your phone discoverable:

1. Make sure you have turned Bluetooth on.

2. Select Settings >Bluetooth> Bluetooth settings.

3. Select „Discoverable‟ check box to make your phone visible to other Bluetooth devices for 120 seconds. You must stay on the Bluetooth settings screen to remain discoverable.

4. Select „Discoverable‟ again during the 120 seconds, or leave the Bluetooth settings screen, to make your phone undiscoverable.

Pair & connect with Bluetooth devices

Before your phone can communicate with a Bluetooth headset or hands-free car kit, the devices must “pair”, then “connect”:

1. Make sure you have turned Bluetooth on.

2. Select Settings > Bluetooth > Bluetooth settings.

3. Your phone starts scanning for Bluetooth devices within range. As they are found, the devices appear in the list of Bluetooth devices.

4. To pair with a device in the list, select it.

5. Type the device‟s PIN and then select „OK‟.

6. Once paired, select the device name to connect. You can also touch & hold the name to open the context menu, and then select Connect.

7. Pairing and connection status appear under the device name.

8. Once the other Bluetooth device shows “connected” status, you can start using it to make and receive phone calls.

9. To disconnect or unpaired with a device, touch & hold the device to open

the context menu. Select Disconnect or Unpaired, as appropriate. If you select „Unpaired‟ when connected, you will be disconnected as well.

Note: The phone supports only the headset and hands-free Bluetooth profiles, so if you try to connect to a device that is not a headset or hands-free car kit, then you will receive an “unable to connect” message.

If you pair with a second headset while connected to the first, the first headset will remain connected. To switch connection to the second headset you must manually select that headset again after pairing.

Rescan for Bluetooth devices

If you want to update the list of Bluetooth devices, select „Scan for devices‟.

5.4 Data usage

It provides a graphical representation of the data usage for a specified Data Usage cycle through Mobile Internet or Wi-Fi.

Data usage refers to the amount of data uploaded or downloaded by your device during a given period. Depending on the device and your wireless plan, you may be charged additional fees when your data usage exceeds your plan's limit. To monitor your data usage, adjust your data usage settings. First check your plan and determine what data limits may apply.

Warning! The usage displayed on the data usage settings screen is

measured by your Slide. Your carrier's data usage accounting may differ. Usage in excess of your carrier plan's data limits can result in steep overage charges. The feature described here can help you track your usage, but is not guaranteed to prevent additional charges.

Data usage settings allow you to:

Set the data usage level at which you'll receive a warning.

Set a data usage limit.

View or restrict data usage by app.

To adjust the settings described here:

Touch the Settings icon on a Home or All Apps screen.

Touch Data usage.

By default, you see the settings for mobile data, that is, the data provided by your network carriers.

5.5 More settings

Airplane mode on/off: When airplane mode is selected, all wireless connectivity is off. This icon will display in the status bar when airplane mode is selected.

Default SMS app: The system settings allow users to select a "default SMS app." Once selected, only the default SMS app is able to write to the SMS Provider and only the default SMS app receives the SMS. The default SMS app is responsible for writing details to the SMS Provider when it receives or sends a new message.

Tethering & portable hotspot: The device is used as a wireless modem for a PC, when it’s connected to the PC using a USB cable.

Using hotspot, you can share your mobile network with other Wi-Fi enabled devices. You can connect and block the User.

Wi-Fi hotspot: Select the Wi-Fi networks which are mobile hotspots. Apps can be restricted from using these networks when in the background. Apps may also warn before using these networks for large downloads.

USB tethering: Tethering refers to connecting one device to another. Tethering allows sharing the Internet connection of the phone or tablet with other devices such as laptops. Sharing internet connection using USB cable is called USB tethering.

Bluetooth Tethering: Tethering refers to connecting one device to another. Tethering allows sharing the Internet connection of the phone or tablet with other devices such as laptops. Sharing internet connection using Bluetooth is called Bluetooth tethering.

VPN: VPN stands for Virtual Private Mode. Using this feature, you can connect to your private network through a public network in a secured way. You can add a VPN connection, customize it as per your requirement and then save the settings. Once the network is created, select the network again to connect to it.

Mobile networks: Select data roaming capability.

Data connection: Lets you select whether you want to keep the data connection On/Off. If you want to activate it, which SIM do you want to use.

3G service: Whether you want to enable 3G service or not.

Access Point Names: You can create new APN for using internet facility on your handset.

How do I perform my GPRS settings to activate internet?

The path to be followed to perform the GPRS settings in your handset is mentioned below:

Main menuSettingsMoreMobile networksAccess Point NamesSelect the SIM on which you want to perform the settingsselect the option for new APN.

(Please contact your SIM service provider for proper APN)

Network operators: Out of the available 2 network, which network do you want to use.

USB internet: Using this function sharing windows PC internet via USB cable.

Device

5.6 Audio profiles

There are four types of user profiles available, they are General, Silent, Meeting and outdoor. Select one user profile and enter the following options:

• Vibrate: Select to have your phone vibrate for incoming calls.

• Volumes: Select to open the volume control, and then drag your finger

along the volume bar to set an incoming call ring volume or alarm, playing back music, videos.

• Voice/ Video ring tone: Select to decide on a ring tone to use for incoming

calls. Note that you can override this setting for individual contacts in the Edit contact details screens.

•Default Notification sound: Select a ring tone to use for a notification (e.g.,

New message) Note that you can override this setting for new Calendar event notifications, text and multimedia message notifications. Go to the applications settings screens to select specific ring tones.

System sound: You can select the following 4 options also.

-Dial pad touch tones: You can select from here if you want the dial pad

touch tones to be activated.

-Touch sounds: You can activate this option if you want the touch tones to

be activated on your device.

-Screen lock sound: On activating this option the screen lock sound is

activated.

-Vibrate on touch: Selecting this will make your device vibrate with every

touch on the display

BesAudEnh & BesLoudness: Enhance audio for earphone and boost volume for speaker.

5.7 Display

ClearMotion: This feature makes the motion in the video to be smooth.

Lock screen style: Choose screen lock

1. Default (Current): In this lock screen there is facility of Quick access to

application.

2. Video Orb: you can see latest video playing on the lock screen.

Lock Screen Notification: It will show you a notification on Lock Screen.

Theme: There are some predefined themes you can set as per your choice.

Wallpaper: Select to choose the type of wallpaper you want on your home screen. You can either select a picture from the gallery or download them on your phone. You can select from one out of the available 4 options: Gallery, Live Wallpapers, Video Wallpapers, and Wallpaper.

Brightness: Select to open the brightness control, and then swipe your finger along the brightness bar to set the level. In sunlight, increase the level.

Auto rotate screen: Select the option if you want the screen to rotate when the orientation of the phone is changed.

Screen Time out: Select to decide how long your phone must be inactive before the screen turns off.

Daydream: You can select from the provided widgets to be displayed when the screen is left idle for a long time.

Font Size: Select to choose the font size of characters on your screen.

Cast Screen: For this option to work the Wi-Fi connection should be on.

Proximity Sensor Calibration: This tool calibrates the proximity sensor.

G-Sensor calibration: You can test the calibration of your phone alignment.

Put out the screen flip: Screen will turn off when you upside down your phone.

5.8 Storage

View and manage the data storage on your phone.

Memory card: Monitor and manage the use of your Memory card from this screen:

1. View how much space you are using on your memory card.

2. Select to use your memory card as USB mass storage when your phone

is connected to your computer (selected by default)

3. Unmounts/eject your memory card from your phone. Note that when your

phone is connected to your computer via USB, you cannot view pictures or play any media stored on the card from your phone.

Internal phone storage: Reports how much internal storage is free.

Notes: 1. The mobile phone may be used as a U disk, when we connect the mobile phone to PC via USB cable; two removable devices are detected in your My Computer. One of them is Phone memory & another is your SD card storage.

2. The phone U-disk function to the actual configuration of the mobile phone,

please take to the actual mobile phone.

Erase Internal Storage: Through this you can erase all data of your internal storage in single tap.

Mount SD Card: You can unmount the inserted SD card for safety purpose.

5.9 Battery

It gives you the current battery level, along with the distribution of battery consumption by different apps.

Battery Percentage: You select this to view the level of battery in Percentage on your Notification Bar.

Open Settings > Battery.

The list at the bottom of the screen shows the breakdown of battery usage for individual apps and services. Touch a graph for more details. The details screen for some apps includes buttons that allow you to adjust settings affecting power usage, or stop the app completely.

Warning! : If you stop some apps or services, your device may not work correctly. Battery status (charging, discharging) and level (as a percentage of fully charged) are displayed at the top of the screen. The discharge graph shows battery level over time since you last charged the device, and how long you've been running on battery power.

5.10 Apps

Unknown sources: (Settings>Security) Select this check box if you want the ability to download applications from the Internet.

With this check box not selected, you will only be able to download applications from Android Market. To ensure your personal data and phone remain secure; it is recommended you not select this check box.

Manage applications: View all the applications stored on your phone and how much space they occupy. If you‟ve downloaded an application from Android Market, you can uninstall it from this screen. Select a specific application to:

1. Clear your user data (if you have any associated with a particular

application).

2. Disassociate the application with any actions.

3. Uninstall - If you‟ve downloaded an application from Android Market, you

will be able to uninstall it from this screen by selecting Uninstall.

Personal

5.11 Location Access

My Location: Select a source for determining your location: Wireless networks, or GPS satellites. Typically GPS will be more accurate (to street level) but it consumes more battery power.

High accuracy: Use GPS, WI-FI and Mobile networks to determine the location

Battery saving: Use Wi-Fi and mobile networks to determine location.

Device only: Use GPS to determine your location.

5.12 Security

Screen Lock: Create a pattern you will be asked to draw before your screen will unlock. You can select to make the pattern visible or invisible as you draw it.

You can choose among these lock options, listed in approximate order of strength:

Slide: It provides no protection, but lets you get to the Home screen quickly, or open Camera and start.

Taking pictures immediately.

Face Unlock: Lets you unlock your phone by looking at it. This is the least secure lock option.

Voice Unlock: You can speak out any particular word to lock/unlock the screen. The voice while setting should be clear.

Pattern: Lets you draw a simple pattern with your finger to unlock the phone. This is slightly more secure than Face Unlock.

PIN: Requires four or more numbers. Longer PINs tend to be more secure.

Password requires four or more letters or numbers. This is the most secure option, as long as you create a strong password.

Important For best security, specify a password that is

A least 8 characters long. Contains a mixture of numbers, letters, and special symbols. Doesn't contain any recognizable words or phrases.

Enable widgets: After enabling this, you can easily add lock screen widgets by simply swiping from left to right on the lock screen and then tapping the + symbol.

Owner info: The information of the owner can be stored and then can be displayed on the lock screen.

SIM card lock settings: Lock your SIM card for extra security. You can also change your SIM card PIN from this screen. If you don‟t know your SIM PIN, you can obtain it from your wireless operator.

Make passwords visible: Select to have your password display as you type it.

Device Administrator: On selecting this option, you can either view or deactivate device administrators.

Unknown Sources: On selecting this option, installations of non-Market apps is enabled.

Verify apps: Some applications can harm you or your device. You can choose to verify apps in order to help prevent harmful software from being installed on your device.

App permissions: Disallow or warn before installation of apps that may cause harm.

Auto-start management: This will show the list of apps which are automatically starts when phone boot up and you can deny manually to start up automatically.

Trusted credentials: It displays the trusted CA certificates.

Install from SD card: Certificates can be installed from the SD card.

Clear credentials: On selecting this option, it removes all the certificates.

5.13 Language & input

Language: On selecting this optio n you can choose the required language of the phone from the given list of languages.

Spelling Checker: On selecting this option you can turn on the spell check feature on your phone.

Android keyboard: It‟s the default input method on your phone.

Google voice typing: On selecting this option, you can convert the voice message into a text message.

Voice search: You can make Google Searches by giving a voice input.

Text-to-Speech output: It controls the rate at which the words are to be spoken for the search engine to understand and provide a correct translation into words.

Pointer speed: On selecting this option, you can control the pointer speed.

5.14 Backup & Reset

You can have a backup of the data present in your mobile on the Google server using your Google Account.

Back up my data. If you check this option, a wide variety of your personal data is backed up automatically, including your Wi-Fi passwords, Browser bookmarks, a list of the apps you've installed from the Market app, the words you've added to the dictionary used by the onscreen keyboard, and most of your customized settings. Some third-party apps may also take advantage of this feature,

So you can restore your data if you reinstall an app.

If you uncheck this option, your data stops getting backed up, and any existing backups are deleted from Google servers.

Automatic restore: When reinstalling an app, restore backed up settings and data. If you need to replace or factory reset your device, you can restore your data for any accounts that were previously backed up.

DRM Reset: This operation to delete all the licenses on this devices.

Factory Data Reset: You can select to reset your phone to factory settings. This will erase all your data from the phone and require you to sign in and go through the set-up screens to use any of the applications.

ACCOUNTS

5.15 Add account

You can add new Gmail & personal web mail email account. You can add your account of Email, Facebook, Google, Gtalk, WhatsApp, WeChat and many more.

System

5.16 Date & time

According to the pre-set, system will voluntarily apply the date, zone, and time provided by internet.

Manual set date, time and zone

• Automatic date & time: You can set your handset‟s date & time settings,

which can detect automatically by following option

• Automatic time zone: The time zone will detect automatically with this

option if you not select this, then you have to set the date & time with zone manually.

• Click Date setting, then click upper or down button to adjust date, month,

and year, click setting when you finish selection.

• Click Time setting, then click upper or down button to adjust hour and

minute, click AM or PM to change morning or afternoon (there is no such selection when you set 24-hour format). Click setting to finish.

• Click 24-hour format, switch between 12-hour or 24-hour format, the time

format you choose will be used on the alarm clock.

• Click date format setting, and then choose the time format you want to

show on Andi 5Q Cobalt Solus.

5.17 Schedule power on/off

1. Click setting application procedure.

2. Click fixed-time start up and shutdown.

You can set your Phone on schedule power, it will be Power off on set time & you can also set the time for power it on.

5.18 Accessibility

These are certain special features which help people with certain disabilities.

• Talk back: Using this function your device provide spoken feedback to help

blind & low vision user.

• Caption: To set global captioning preferences, such as whether to show

captions and what language, text size, and text style to use.

• Magnification gestures: Using this feature you can zoom in & out by triple

tapping the screen.

• Power button ends call: Calls can be ended with the power button on

selecting this option.

• Speak Password: Check to get spoken feedback while typing passwords.

• Accessibility Shortcut: When this feature is turned on, you can quickly

enable accessibility features.

• Touch & hold delay: Lets you adjust the delay required for the phone to

notice that you're touching and holding an item (for example, to move an app to a Home screen).

• Quick boot: Quickly and easily reboot your device.

5.19 Printing

To print your photos, documents, and more from your phone, check to see if

your printer‟s manufacture has an app on Google Play Store. Then touch

Apps Settings Printing to get started.

*Note: All the printers may not be compatible. Please contact your printer manufacturer for details

5.20 Developer Options

Take bug report: This will collect information about your current device state, to send as an e-mail message.

Desktop backup password: Set a password to secure your backup data.

Stay Awake: Screen will never sleep while charging.

Select runtime: Android 4.4 will reportedly allow users to select which runtime they use. The available options will be Dalvik and Google's new runtime called ART.

Enable Bluetooth HCL snoop log: Android 4.4: the ability to capture all Bluetooth HCI packets and save them to a file.

Process Stats: These tools let you spot-check your app‟s memory use, but Process Stats now gives you a broader, time-based view of your app‟s behavior.

USB debugging: When you connect your phone to laptop/PC, the following image will pop up on your screen, it will sync your phone with Laptop/Pc through USB connectivity.

Revoke USB debugging authorizations: By this tool you can cancel or revoke the USB debugging authorizations.

Protect SD card: Apps must request permission to read SD card.

Power menu bug report: Include option in power menu for taking a bug report.

Allow mock locations: Allow mock location and service information to be sent to a location manager service for testing.

Select debug app: Using this you can set a debug application.

Wait for debugger: debugged application waits for debugger to attach before executing.

Verify apps over USB: Check apps installed via ADB/ADT for harmful behavior.

Wireless display certification: Android 4.4 devices can now be certified to the Wi-Fi Alliance Wi-Fi Display Specification as Miracast compatible.

Show touches: Set to show the pointer, when we touch the screen.

Pointer Location: Set the Co-ordinates & traces of the pointer when you touch the screen.

Show surface updates: Flash entire window surfaces when they update.

Show layout bounds: Show clip, bounds, margins etc.

Force RTL layout direction: To make it easier to test and debug layout mirroring issues without switching to an RTL language.

Window animation scale: The ratio by which the animation scale is applied.

Transition Animation Scale: To speed up transitions (and your phone‟s reaction time), either turn off animations, or reduce the scale.

Animator duration scale: The ratio in which the animation scale is measured.

Simulate secondary displays: Select one option out of the provided four.

Force GPU rendering: Use 2D hardware acceleration in application.

Show GPU view updates: Flash views inside window when drawn with the GPU.

Show hardware layers update: Flash hardware layers green when they update.

Debug GPU overdraw: It is tools that allow visualizing overdraw parts of the screen where the app draws more than one time. Dark Red means that this part of the screen is at least 4 different layers draw on top of each other.

Force 4x MSAA: Enable 4x MSAA in OpenGL ES 2.0 apps.

Disable HW overlays: Always use GPU for screen compositing.

Strict mode enabled: Flash screen when apps do long operations on main thread.

Show CPU usage: Screen overlay shows the current CPU usage.

Profile GPU rendering: Measure rendering time in adb shell dump system graphics info.

Enable Open GL traces: Asks you to enable or keep GL traces disabled.

Do not keep activities: Set to end a running application when you launch a new application.

Background process limit: Set the standard limit of processes which run in the background.

Show all ANRs: Show apps not responding dialog for background apps.

5.21 About iBall Mobile

View the model number and version information for your phone.

Status: You will get the current status like Battery status, Battery level Network, Signal strength, Mobile network type, my phone number, IMEI, IP address, Wi-Fi MAC address, Bluetooth address, Serial number & Up time.

Legal information: You will get open source licenses & Google legal information.

Model Number: It will show you model number of your handset.

Android version: It will show you current version of Android.

It will also show the Baseband version, Kernel version and Build number of the handset.

6. Internet

Ways of Connecting to the Internet

Your device‟s networking capabilities allow you to access the Internet or

your corporate network through Wi-Fi, GPRS, and EDGE (if available).

You can also add and set up a VPN or proxy connection. (If required)

Wi-Fi

Wi-Fi provides wireless Internet access over distances of up to 100 meters (300 feet). To use Wi-Fi on your device, you need access to a wireless

access point or “hotspot”.

Note: The availability and range of your device‟s Wi-Fi signal depends on

the number, infrastructure, and other objects through which the signal passes.

Browser

To open the Browser, touch and select Browser icon.

The Browser always opens to the last Web page you were viewing. The first time you enter the Browser after powering on, your home page will display.

You can change your home page by pressing MENU > Settings >General > Set homepage.

Zoom and navigation in Web pages

While viewing a Web page, you can press MENU and select Settings > >Advanced >Default zoom to set the zoom controls.

Swipe your fingertips in any direction to shift your page view.

The Browse screen

From the Browse screen you can do the following:

1. Go to a Web page: Make sure the focus is not on a text box and then start

typing the URL.

2. Add a bookmark: Bookmark the Web page you are currently viewing:

• Press MENU and select „Save to bookmarks‟.

• Confirm the URL and name, and then select „OK‟.

To view all your bookmarks, press MENU and select Bookmarks.

3. Refresh a Web page: To refresh the contents of the current page, press

MENU and select „Refresh‟.

Open pages in separate windows

You can keep more than one Web page open by using multiple windows to display the pages. You can open up to eight windows.

Open a new window: From a Web page, press MENU and select „Windows‟. The Current windows screen opens, showing the Web page you started

from, plus a “new window”. Select „New window‟. Your home page opens in

a new window. To return to one of the other windows, press MENU and select „Windows‟. Select the page you want to view.

Manage bookmarks

You can store as many bookmarks as you want on your phone.

Press MENU and select „Bookmarks‟. The Bookmarks screen opens.

1. Bookmark any page: Select „Add‟. Type a name and location (URL) in the

dialog box. Select „OK‟.

2. Send bookmarked page‟s URL: Touch & hold the bookmark you want to

open. The context menu opens. Select „Share link‟. An email Compose

screen opens with the URL as the message. Address your message and finish composing and select „Send‟.

3. View bookmarked page: Touch & hold the bookmark you want to open.

The context menu opens. Select View page or Open in new window.

4. Edit bookmark: Touch & hold the bookmark you want to e open. The

context menu opens. Select „Edit bookmark‟. The edit bookmark dialog box opens. Type your change and select „OK‟.

5. Delete a bookmark: Touch & hold the bookmark you want to open. The

context menu opens. Select „Delete bookmark‟. You will be asked to

confirm.

6. Bookmark current page: Go to a Web page you want to bookmark. Press

MENU and select „Bookmarks‟. The Bookmarks screen opens. Press MENU

and select Bookmark last-viewed page. The Bookmark link dialog box opens. Confirm or edit the information, then select „OK‟.

Set your home page

You set your home page from the Settings screen:

1. Press MENU and select More > Settings. The Settings screen opens.

2. In the Page content section, select „Set home page‟ to open the dialog

box.

100

3. Type the URL of the page you want to set as home, and then select „OK‟.

Download Web files and applications

Before you download any files or applications using the Browser, note the following:

1. Before you can download Web applications, you must explicitly “allow”

downloading from the Home > Settings screen:

On the Home screen, then press and select Settings. Select „Security‟, then select „Unknown sources‟ check box.

2. All items downloaded from the Web are stored on your memory card, so

be sure you have a card installed in your phone before you download from the Browser.

3. The Browser will only allow you to download items that are supported by

an application installed on the phone.

Warning! Applications downloaded from the Web can be from unknown sources. To protect your phone and personal data, only download applications from sources you trust, such as Android Market.

iBall Andi 5Q Cobalt Solus, Andi 4 IPS Tiger, Andi 4p ips gem, andi 4.5v baby panther, andi 4.5P User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual