IAP EXTENSION BOOM User Manual

www. IAP-AirProducts.com

EXTENSION BOOM 6”/8”

User’s Manual

- 2 -

EXTENSION BOOM

GRAPHIC SYMBOLS 3

GENERAL INFORMATION 3

PRODUCT APPLICATION 3

EQUIPMENT ARRIVAL 3

CONSTRUCTION 4

TECHNICAL DATA AND DIMENSION 4

MOUNTING VARIANTS 5

INSTALLATION 6

MAINTENANCE 7

TROUBLESHOOTING 7

[e-mail]

EXTENSION BOOM

Graphic symbols

- 3 -

important information

warnings, important
notes

3D le or preview
available

use respiratory
protective equipment

you will need tools, sub
parts, accessories

protect from noise or
eye damage

keep away from source
of high temperature

switch o before
proceeding

GENERAL INFORMATION

This instruction manual contains Extension Booms use and maintenance information. Extension Booms user should become acquainted with
contents of this publication to learn about unit construction, principles of operation and means of its safe use. Manufacturer is not responsible
for any conse quences arising from the use of the unit against it s intended purpose. Manufacturer reser ves the right to make changes to improve
performance and operational qualities of the product in the future without prior notice.

Store in dry and air y rooms. Place in a position ready for operation.
Protect against possibility of shifting during transport.

PRODUCT APPLICATION

Extension booms can be operated without restric tion in the technical areas intended for permanent human habitation. They are designed
for extraction and purication of air from the dry dust (with particular emphasis on the processes of welding, grinding, polishing, pouring,
dispensing, cutting metals and plastics).

Manufacturer does not recommend use of the unit for:

• air purication from dust containing asbestos, cadmium, beryllium

• air purication from wet dust

EQUIPMENT ARRIVAL

Upon arrival the user needs to thoroughly inspect the equipment and make sure there was no damage caused by the shipping carrier.
If there is damage, the user needs to immediately contac t their dealer.

If the package or device are damaged upon delivery

The user should make sure that the items listed below were included
with the device set:
User’s manual,

• set of bolts and nuts,

• extension boom base,

• beam with support bar

• suppor t beam with mounting socket

• counter support bar,

• exible hoses using clamping bands (2 sets).

the user needs to immediately contact the dealer
and draw up a protocol with the representative of the
shipping company (many shipping companies consider
acceptance of the shipment to be sucient to avoid
liability for damage caused during shipping).

In the case of lack of any listed items, please contact the dealer.

www. IAP-AirProducts.com