Quick Start Guide
Brand: iamplus
Model: IAM1110
Marketing: dial
FCC ID: 2AB2S-IAM1110
Operating Quick Guide:
Contents
I. Get Started
a. A quick overview of PULS
b. Setup
c. Power on and wake
d. Charging your PULS
e. PULS Connect
f. Tethering your PULS to your mobile number
II. Basics
a. Voice control
b. Navigation
c. Gestures
d. Settings
e. Pair a Bluetooth audio device
f. Charge the battery
g. Extender for larger wrists
III. Notifications
IV. Phone Calls
V. Email
VI. Messages
VII. Calendars and Reminders
VIII. Music
a. Play music
b. Song ID
IX. Fitness
X. Camera
XI. Maps and Directions
XII. Gallery
XIII. Safety, Handling and Support
GET STARTED
A Quick Overview of PULS
Setup
To start, turn on your PULS by pressing and by holding the side button until you
see the i.am.plus logo.
Follow the on-screen instructions to continue set-up. Go to
set up your email and social networking accounts.
Swipe left to view the status bar. Swipe right to activate the app list.
You might need to charge your PULS before set up. For more information on
charging, see Charge Section.
Keyboard
The keyboard expects you to be sloppy. Start typing, get as close as you can to
the letter you want, and the keyboard will suggest words. There are two ways to
navigate the keyboard:
Tap a character and select from the list above the keyboard
Long press a character and select from the pop-up
Icons for keyboard (images to be included)
Alternative characters
Speech to text
Enter
Delete
Swipe from left for a space
BASICS
Gestures
Press wake button, then swipe up on watch face to unlock
Swipe from right to view main menu options
App list
Notifications
AneedA Voice Control
www.my.puls.com to
In the app list, scrip up and down to view apps. Tap to open.
Within an app, swipe right for menu
Press and hold screen to access volume on phone and music apps. To increase
volume, slide up. To decrease volume, slide down.
AneedA Voice Control
Tap the AneedA icon located on the bottom edge and speak when prompted
Settings
Scroll App List and tap Settings
Swipe from right for the In-App Menu
Scroll and select from list
Pair a Bluetooth Audio Device
Scroll App List and tape Bluetooth
Tap Bluetooth Icon
Scroll and tap the name of the device that you would like to pair
Tap and pair to complete pairing of device
For more options, swipe down to access action panel
Tap to remove pairing or rename device
Charge the Battery
Align the charging clip with the gold contacts located below the screen
Extender for Larger Wrists
Open the cuff and push default extender towards the center
Slide in the extender until you hear a click
NOTIFICATIONS
Manage Notifications
Swipe from left to reply to or delete a message
Number of notifications available
Swipe from right to dismiss the notification
Press and hold a notification to be able to scroll through all notifications
IMPORTANT HANDLING INFORMATION
Important handling information
Exposure to liquid
PULS is water resistant but not waterproof. You may, for example,
wear and use your PULS during exercise (exposure to sweat is OK), in the rain,
and while washing your hands. If water splashes on to the PULS, wipe it off with
a nonabrasive, lint-free cloth. Try to minimize exposing your PULS to these
substances and follow the instructions below in the “Cleaning and care” section if
your PULS comes into contact with them:
Soap, detergent, acids or acidic foods, and any liquids other than fresh
water, such as salt water, soapy water, pool water, perfume, insect
repellent, lotions, sunscreen, oil, adhesive remover, hair dye, or solvents.
Submerging your PULS is not recommended. PULS has a water resistance
rating of IPX7 under IEC standard 60529.
The following may affect the water resistance of your PULS and should be
avoided:
Dropping your PULS or subjecting it to other impacts.
Submerging your PULS in water for long periods of time.
Swimming or bathing with your PULS
Exposing your PULS to pressurized water or high velocity water, for
example, showering, water skiing, wake boarding, surfing, jet skiing, and
so on.
Wearing your PULS in the sauna or steam room
Operating temperature
PULS is designed to work best in ambient temperatures between 32° and 95° F
(0° and 35° C) and be stored in temperatures between -4° and 113° F (-20° and
45° C). PULS can be damaged and battery life shortened if stored or operated
outside of these temperature ranges. Avoid exposing PULS to dramatic changes
in temperature or humidity. If the interior temperature of PULS exceeds normal
operating temperatures (for example, in a hot car or in direct sunlight for
extended periods of time), you may experience the following as it attempts to
regulate its temperature:
Charging may slow or stop.
The display may dim.
A warning screen may appear.
Some data transfer may be paused or delayed.
Some apps may close
Learn more, service, and support
Refer to the following resources to get more PULS-related safety, software, and
service information:
Iamplus dial
Model: IAM1110 FCC ID: 2AB2S-IAM1110
FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the use‘s authoity to opeate the euipet.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC RF Exposure Compliance
This equipment complies with radio frequency (RF) exposure limits adopted by the Federal
Communications Commission for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 10 mm between the radiator & your face.
Declaration of Conformity
Hereby, i.am.plus electronics inc., declares that this wireless device is in compliance with the
essential requirements and other relevant provisions of the R&TTE Directive.
A copy of the EU Declaration of Conformity is available online at
RF Exposure Information (SAR)
This device meets the EU requirements (1999/519/EC) on the limitation of exposure of
the general public to electromagnetic fields by way of health protection.
To reduce exposure to RF energy, keep this device away from your body (trunk) at least
10 mm when operating this device.
http://iamplus.com
Waste Electrical and Electronic Equipment (WEEE)
This symbol means that according to local laws and regulations your product
and/or its battery shall be disposed of separately from household waste. When
this product reaches its end of life, take it to a collection point designated by
local authorities. Proper recycling of your product will protect human health
and the environment.
Loading...